wiki:GPFS_3D_model

Version 20 (modified by rock, 16 years ago) (diff)

--

GPFS 3D_Model R/W Performance Testing

Testbed Information

  • Server
CPU Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (each node)
Memory 3GB DDR2 667
swap6GB
Disk sda:320G sdb:160G
NIC Intel Corporation 82566DM Gigabit Network Connection
Switch D-link 24 port GE switch


  • Clients
Node number3 nodes
CPU Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (each node)
Memory 2GB DDR2 667 (each node)
swap0GB
Disk sda:320G sdb:160G
NIC Intel Corporation 82566DM Gigabit Network Connection
Switch D-link 24 port GE switch


  • Software Information
OSDebian etch
Cluster EnvironmentDRBL
3D Modol toolsIvIsee


< 2 Test Cases >

Case 1: Running 3D Model on single node
Case 2: Running 3D Model on GPFS

Case1.1 Access Once

PATH: /home/rock/3D_model
Tool: IvIsee 3.3.RC_5
Using Model: master1260.stl (1.4GB)
Terminal1 Command: rock@gpfs-server:/home/rock/3D_model$ IvIsee master1260.stl (load_3D_model)
Terminal2 Command: rock@gpfs-server:~$ sudo dstat -g -m -t -d -D sda (monitoring)

Example:

---paging-- ------memory-usage----- ---time--- --dsk/sda--
__in_ _out_|_used _buff _cach _free|__epoch___|_read _writ
   0     0 | 208M   18M  622M 2179M|1212050149|  25M    0 
   0     0 | 214M   18M  647M 2149M|1212050150|  25M    0 
   0     0 | 221M   18M  676M 2112M|1212050151|  29M  144k  

Conclusion: It takes total 50 seconds hd times (R/W)

Case2.1 Access Once

PATH: /home/gpfs_mount
Tool: IvIsee 3.3.RC_5
Using Model: master1260.stl (1.4GB)
Terminal1 Command: rock@gpfs-server:/home/gpfs_mount$ IvIsee master1260.stl (load_3D_model)
Terminal2 Command: rock@gpfs-server:~$ sudo dstat -g -m -t -d -D sda -M gpfs -N eth2 (monitoring)

Example:

---paging-- ------memory-usage----- ---time--- --dsk/sda-- --gpfs-i/o-
__in_ _out_|_used _buff _cach _free|__epoch___|_read _writ|_read write
   0     0 | 206M   20M 2050M  752M|1212052121|   0     0 |2048k    0
   0     0 | 209M   20M 2050M  748M|1212052122|   0     0 |  14M    0  
   0     0 | 216M   20M 2050M  741M|1212052123|   0     0 |  31M    0 

Conclusion: It takes total 50 seconds hd times (R/W)

PS: Check the attached files for detail data



Case3: Simultaneous Loaded Data 10 Times (10*1.4GB)

  • 3.1 Not used GPFS
    • PATH: /home/rock/3D_model
    • Tool: IvIsee 3.3.RC_5
    • Using Model: master1260.stl (1.4GB) * 10
    • Terminal1 Command: $ ./test.sh (load_3D_model)
    • Terminal2 Command: $ dstat -c -m -d -D sdb -n -N eth2 -M gpfs > 10g_sdb(monitoring)


  • 3.2 Used GPFS
    • PATH: /home/gpfs_mount
    • Tool: IvIsee 3.3.RC_5
    • Using Model: master1260.stl (1.4GB) * 10
    • Terminal1 Command: $ ./test.sh (load_3D_model)
    • Terminal2 Command: $ dstat -c -m -d -D sdb -n -N eth2 -M gpfs > 10g_gpfs(monitoring)


  • 3.3 Comparision
    • Comparison of execution time (unit:second)
      • Load 10g comparison
    • Comparison of peak speed (unit:Mb)
      • GPFS comparison access speed

Attachments (9)

Download all attachments as: .zip