Version 2 (modified by jazz, 15 years ago) (diff) |
---|
2010-05-19
Network Virtualization
- Open vSwicth - multilayer virtual switch (2010-05-05 補充, 2009-01-20)
- Xen Cloud Platform 預設的網路集線器(switch)
- Open vSwitch reaches 1.0 - 2010-05-19)
- [官網] http://openvswitch.org/
- [套件] 目前尚未看到有人打包套件,應該是因為 Open vSwitch 計畫到了 2010 八月才把原始碼公開吧!!
- OpenFlow -
Network
- ethtool - display or change ethernet card settings
- [簡介] Give Me Liberty or Give Me Eth
- [官網] http://sourceforge.net/projects/gkernel/
- [套件] debian - ethtool, ubuntu - ethtool
- 指令一:取得網路卡的驅動程式版本資訊 - 參考來源: Jserv's blog: ethtool 使用實例
ethtool -i eth0
- 透過指令可以使特定網卡的燈號閃爍數秒 - 參考來源: 準確判斷 eth0 是那一張實體網卡
ethtool -p eth0
- cdpr - Cisco Discovery Protocol Reporter - (2009-05-07)
- [參考] cdpr is a nifty little command which speaks the Cisco Discovery Protocol, allowing you to learn interesting things from your network.
- [官網] http://sourceforge.net/projects/cdpr/
- [套件] debian - cdpr, ubuntu - cdpr
- 蠻有趣的套件,還可以查出接在哪一個 swicth 上的哪個 port。當然如果 switch 不是 Cisco 出的,大概就看不到資訊了吧。
jazz@Wdebian:~$ sudo apt-get install cdpr jazz@Wdebian:~$ sudo cdpr cdpr - Cisco Discovery Protocol Reporter Version 2.2.1 Copyright (c) 2002-2006 - MonkeyMental.com 1. eth0 (No description available) 2. tap0 (No description available) 3. usbmon1 (USB bus number 1) 4. usbmon2 (USB bus number 2) 5. usbmon3 (USB bus number 3) 6. usbmon4 (USB bus number 4) 7. usbmon5 (USB bus number 5) 8. usbmon6 (USB bus number 6) 9. usbmon7 (USB bus number 7) 10. any (Pseudo-device that captures on all interfaces) 11. lo (No description available) Enter the interface number (1-11):1 Using Device: eth0 Waiting for CDP advertisement: (default config is to transmit CDP packets every 60 seconds) Device ID value: X.nchc.org.tw Addresses value: 140.110.X.X Port ID value: GigabitEthernet0/33
- 如何在 Linux System 當中偵測網路線是否有接上? - (2009-05-05)
$ cat /sys/class/net/eth0/carrier