Changes between Initial Version and Version 1 of wade/embedded/arduino/example/temp


Ignore:
Timestamp:
May 3, 2013, 2:31:35 PM (11 years ago)
Author:
wade
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • wade/embedded/arduino/example/temp

    v1 v1  
     1[[PageOutline]]
     2
     3= 程式一 =
     4{{{
     5/*
     6  Blink
     7  Turns on an LED on for one second, then off for one second, repeatedly.
     8 
     9  This example code is in the public domain.
     10 */
     11
     12void setup() {               
     13  // initialize the digital pin as an output.
     14  // Pin 13 has an LED connected on most Arduino boards:
     15  pinMode(2, OUTPUT);
     16  pinMode(3, OUTPUT);
     17  pinMode(4, OUTPUT);
     18  pinMode(5, OUTPUT); 
     19  pinMode(6, OUTPUT);
     20  pinMode(7, OUTPUT); 
     21  pinMode(8, OUTPUT);
     22  pinMode(9, OUTPUT); 
     23}
     24
     25void loop() {
     26  digitalWrite(2, HIGH);   // set the LED on
     27  delay(300);              // wait for a second
     28  digitalWrite(2, LOW);    // set the LED off
     29  delay(300);              // wait for a second
     30 
     31  digitalWrite(3, HIGH);   // set the LED on
     32  delay(300);              // wait for a second
     33  digitalWrite(3, LOW);    // set the LED off
     34  delay(300);              // wait for a second
     35 
     36  digitalWrite(4, HIGH);   // set the LED on
     37  delay(300);              // wait for a second
     38  digitalWrite(4, LOW);    // set the LED off
     39  delay(300);              // wait for a second
     40 
     41  digitalWrite(5, HIGH);   // set the LED on
     42  delay(300);              // wait for a second
     43  digitalWrite(5, LOW);    // set the LED off
     44  delay(300);              // wait for a second
     45 
     46  digitalWrite(6, HIGH);   // set the LED on
     47  delay(300);              // wait for a second
     48  digitalWrite(6, LOW);    // set the LED off
     49  delay(300);              // wait for a second
     50 
     51  digitalWrite(7, HIGH);   // set the LED on
     52  delay(300);              // wait for a second
     53  digitalWrite(7, LOW);    // set the LED off
     54  delay(300);              // wait for a second
     55 
     56  digitalWrite(8, HIGH);   // set the LED on
     57  delay(300);              // wait for a second
     58  digitalWrite(8, LOW);    // set the LED off
     59  delay(300);              // wait for a second
     60 
     61  digitalWrite(9, HIGH);   // set the LED on
     62  delay(300);              // wait for a second
     63  digitalWrite(9, LOW);    // set the LED off
     64  delay(300);              // wait for a second
     65 
     66}
     67}}}