Some Notes from MPICH2 Installation Guide

Offical ​User's Guide

• MPICH2 test examples - cpi
  • in Offical ​User's Guide

    mpd &
    cd /home/you/mpich2-installed/examples
    mpiexec -n 3 cpi
    mpdallexit
    

  • in Debian environment

    jazz@bio-cluster-12:~$ mpd &
    [1] 3551
    jazz@bio-cluster-12:~$ mpiexec -n 3 /usr/share/mpich2/examples/cpi
    Process 1 of 3 is on bio-cluster-12
    Process 2 of 3 is on bio-cluster-12
    Process 0 of 3 is on bio-cluster-12
    pi is approximately 3.1415926544231318, Error is 0.0000000008333387
    wall clock time = 0.001213
    jazz@bio-cluster-12:~$ mpdallexit
    

• Compiling and Linking
  • 4.3 Special Issues for C++
    • Some users may get error messages such as

      SEEK_SET is #defined but must not be for the C++ binding of MPI
      

    • The problem is that both stdio.h and the MPI C++ interface use SEEK SET, SEEK CUR, and SEEK END. This is really a bug in the MPI-2 standard. You can try adding following definition to the command line

      -DMPICH_IGNORE_CXX_SEEK
      

• 5.1 Standard mpiexec
  • Currently, MPICH2 does not fully support calling the dynamic process routines from MPI-2 (e.g., MPI_Comm_spawn or MPI_Comm_accept) from processes that are not started with mpiexec.
  • Note: this might be the reason why we encounter R-MPI mpi.spawn.Rslaves() problem.

• 5.3.1 Basic mpiexec arguments for MPD
  • You can use mpiexec to run non-MPI programs as well. This is sometimes useful in making sure all the machines are up and ready for use. Useful examples include

    mpiexec -n 10 hostname
    mpiexec -n 10 printenv
    

• 5.3.2 Other Command-Line Arguments to mpiexec for MPD
  • This section describe machinefile format to specifying hosts, number of processes and interface host name(ifhn)
  • i.e, ${hostname}:${number of processors} ifhn=${name of network interface}

    # comment line
    hosta
    hostb:2
    hostc   ifhn=hostc-gige
    hostd:4 ifhn=hostd-gige
    

• 5.7.1 MPD in the PBS environment
  • One way to convert the node file to the MPD format is as follows:

    sort $PBS_NODEFILE | uniq -C | awk ’{ printf(”%s:%s”, $2, $1); }’ > mpd.nodes
    

• 6.1 MPD
  • mpdlistjobs lists the jobs that the mpd’s are running. Jobs are identified by the name of the mpd where they were submitted and a number.
  • mpdsigjob delivers a signal to the named job. Signals are specified by name or number.

    tty1: 
    
    jazz@bio-cluster-12:~$ mpiexec -n 2 /home/jazz/demo1
    This is machine 0 of 2  name = bio-cluster-12
    This is machine 1 of 2  name = bio-cluster-08
    
    =================================================================
    tty2: 
    
    jazz@bio-cluster-12:~$ mpdlistjobs
    jobid    = 4@bio-cluster-12_48909
    jobalias =
    username = jazz
    host     = bio-cluster-12
    pid      = 3619
    sid      = 3618
    rank     = 0
    pgm      = /home/jazz/demo1
    
    jobid    = 4@bio-cluster-12_48909
    jobalias =
    username = jazz
    host     = bio-cluster-08
    pid      = 6187
    sid      = 6186
    rank     = 1
    pgm      = /home/jazz/demo1
    

• 7.1 gdb via mpiexec
  • If there are no gdb installed in your system, you might have following error message:

    jazz@bio-cluster-12:~$ mpiexec -gdb -n 2 /home/jazz/demo1
    0: Traceback (most recent call last):
    0:   File "/usr/bin/mpdgdbdrv.py", line 78, in ?
    0:     write(gdb_sin_fileno,'handle SIGUSR1 nostop noprint\n')
    0: OSError: [Errno 32] Broken pipe
    1: Traceback (most recent call last):
    1:   File "/usr/bin/mpdgdbdrv.py", line 75, in ?
    1:     write(gdb_sin_fileno,'set confirm off\n')
    1: OSError: [Errno 32] Broken pipe
    

  • After install gdb, you can use gdb to debug your MPICH2 program.

    jazz@bio-cluster-12:~$ sudo apt-get install gdb
    jazz@bio-cluster-12:~$ mpiexec -gdb -n 2 /home/jazz/demo1
    1: Traceback (most recent call last):
    1:   File "/usr/bin/mpdgdbdrv.py", line 75, in ?
    1:     write(gdb_sin_fileno,'set confirm off\n')
    1: OSError: [Errno 32] Broken pipe
    0:  (gdb) l
    0:  4    * History:
    0:  5    *   2008-04-09 BETA
    0:  6    *   2008-06-25 增加顯示主機名稱功能
    0:  7   */
    0:  8
    0:  9   #include <stdio.h>
    0:  10  #include <unistd.h>
    0:  11  #include "mpi.h"
    0:  12  int main (int argc, char **argv)
    0:  13  {
    0:  (gdb)
    

  • You can attach to a running job with -gdba option, where <jobid> comes from mpdlistjobs.

    mpiexec -gdba <jobid>
    

Offical ​Installer's Guide

• 4 Choosing the Communication Device
  • Most installations should use either the ch3:ssm or ch3:sock methods. If you need multi-threaded MPI, you must use ch3:sock in this release. If you have a cluster of SMPs and do not need a multi-threaded MPI, then select ch3:ssm. If you are interested in trying out our highest-performance device, and need neither threads nor the dynamic process routines from MPI, then you can use ch3:nemesis.
• 5.1.5 Running MPD on multi-homed systems

  n1% mpd --ifhn=192.168.1.1 &
  

​MPICH2 Installation and Configuration Guide