= 2011-09-27 =

 * 為何 rock 要把 bridge.ko 加入 /usr/bin/mkpxeinitrd-net 呢？答案很明顯是跟 brctl 有關！
{{{
root@debian:~# lsmod > before
root@debian:~# brctl addbr br0
root@debian:~# lsmod > after
root@debian:~# diff before after 
1a2,3
> bridge                 39662  0 
> stp                     1440  1 bridge
}}}
 * rock 把執行 /bin/start_xen_bridge.sh 需要用的指令都補進 initrd 裡：brctl ip egrep awk gawk seq fgrep dirname expr bash
 * 可是他卻漏了 mount umount mount.nfs umount.nfs
 * 至於 netloop.ko 是 xen_brdige.sh 中會用到的，在 KVM 的 case 中並不會用到。
{{{
#!diff
--- /usr/bin/mkpxeinitrd-net.drbl-virt_bak	2011-09-27 02:48:49.000000000 +0800
+++ /usr/bin/mkpxeinitrd-net	2011-09-27 02:35:36.000000000 +0800
@@ -37,7 +37,8 @@
 # uncompress the compress kernel module. This is special for Mandriva case. It uses compressed kernel module, e.g. pcnet32.ko.gz. Before we used modprobe from busybox, we have to uncompress that. Now the modprobe program is from the OS (See variable include_bin_prog_from_server), so we should allow this type of kernel modules.
 use_compressed_kernel_module="yes"
 # Some required bin programs to be included in the PXE initrd, which are not provided by busybox or the one provided by busybox does not support the function we want. E.g. sleep (we need "sleep 0.1", while sleep from busybox does not support 0.1 secs).
-include_bin_prog_from_server="sleep lspci insmod modprobe rmmod lsmod pkill strings mount umount mount.nfs umount.nfs"
+# drbl-virt add
+include_bin_prog_from_server='sleep lspci insmod modprobe rmmod lsmod pkill strings brctl ip egrep awk gawk seq fgrep dirname expr bash'
 
 # No need to use sudo if we are root
 if [ $UID -eq 0 ]; then
@@ -303,6 +304,9 @@
      cp -a --parents $i $initrd/lib/modules/$kernel_ver/
    done
 
+# drbl-virt add
+cp -a --parents kernel/net/bridge/bridge.ko $initrd/lib/modules/$kernel_ver/
+cp -a --parents kernel/drivers/xen/netback/netloop.ko $initrd/lib/modules/$kernel_ver/
    # Deal with firmwares!
    # The following is borrowed from Debian's /usr/share/initramfs-tools/hook-functions
    if [ "$copy_all_firmwares" = "yes" ]; then
}}}
 * rock 的 init 切入點蠻特殊的，我原本是把切換成 br0 的程序加在 udhcpc 之前，試圖讓 br0 去取得 IP 位址。可是卻會出現 /sbin/init 第 175 行錯誤的問題。
{{{
150 $echo "Bringing up loopback interface"
151 ifconfig lo 127.0.0.1 up
152 route add -net 127.0.0.0 netmask 255.0.0.0 lo
153 ### 加在這裡
+   brctl addbr br0
+   brctl addif br0 eth0
+   ifconfig br0 0.0.0.0   ### 在 initrd.img 中要用這種方式才能啟動 br0
+   ifconfig eth0 0.0.0.0  
+   sleep 0.1
}}}
 * 若是在 udhcpc 已經用 eth0 取得 IP 之後，才去把 eth0 暫停，新增 br0，再將 eth0 加入 br0，就能正常掛載 NFS 當 ROOTFS。這真的是需要一些觀念啊～
{{{
#!diff
--- /usr/lib/mkpxeinitrd-net/initrd-skel/linuxrc-or-init.drbl-virt_bak	2011-09-27 02:35:36.000000000 +0800
+++ /usr/lib/mkpxeinitrd-net/initrd-skel/linuxrc-or-init	2011-09-27 02:35:36.000000000 +0800
@@ -244,6 +244,8 @@
   done
 done
 
+# drbl-virt add
+bash /bin/start_xen_bridge.sh
 # clean the tag file
 [ -f "/dev/sname" ] && rm -f /dev/sname
}}}
 * start_xen_bridge.sh 其實有點小複雜，會先去判斷網卡個數，然後透過 /bin/network-bridge 的 netdev 參數來指定網卡。
{{{
# cat /usr/lib/mkpxeinitrd-net/initrd-skel/bin/start_xen_bridge.sh
#!/bin/bash
# drbl-virt add
NICs=$(/sbin/ifconfig | grep eth | awk '{print $1}')
declare -i NICs_nu=$(echo $NICs |wc -w)
NIC=""

if [ $NICs_nu -lt 1  ]; then
    for (( i=0 ; i<$NICs_nu ; i++ ))
    do
        NIC_IP=$(ifconfig eth${i} | grep "inet addr" | sed 's/inet addr://g' | sed 's/Bcast.*$//g' | sed 's/^[ ]*//')
        if [ -n $NIC_IP ]; then
            NIC="eth${i}"
            break
        fi
    done
else
    NIC=$NICS
fi

bash /bin/network-bridge start netdev=$NIC
}}}
 * 關於 
{{{
#!sh
160 # find my IP address
161 NETDEVICES="$(cat /proc/net/dev | awk -F: '/eth.:|tr.:/{print $1}')"
162 for DEVICE in $NETDEVICES; do
163   IP_tmp="$(ifconfig $DEVICE | grep -A1 $DEVICE | grep -v $DEVICE | grep "inet addr" | sed -e     's/^.*inet addr:\([0-9\.]\+\).*$/\1/')"
164   if [ -n "$IP_tmp" ]; then
165     # Got the IP address, stop to get from other port, so break
166     IP=$IP_tmp
167     echo "My IP address is $IP ([$DEVICE])."
168     break
169   fi
170 done
171 
172 IP_prefix="$(echo $IP | cut -d"." -f1-3)"
173 if [ -n "$(echo "$NFSSERVER_LIST" | grep -E "$IP_prefix.[0-9]+")" ]; then
174   for i in $NFSSERVER_LIST; do
175     if [ "$(echo $i | cut -d"." -f1-3)" = $IP_prefix ]; then
176       nfsserver=$i
177       break
178     fi
179   done
180 else
}}}