wiki:jazz/08-11-16

Version 13 (modified by jazz, 16 years ago) (diff)

--

2008-11-16

  • SC'08
  • Austin 近十日天氣預報
  • 無線網路:
    C:\>tracert 140.110.1.1
    
    Tracing route to 140.110.1.1 over a maximum of 30 hops
    
      1     2 ms    <1 ms    <1 ms  conf-rtr-south-vlan203.sc08.org [140.221.224.3]
      2     3 ms     1 ms     1 ms  core-rtr-1-conf-rtr-south.sc08.org [140.221.251.114]
      3    34 ms    33 ms    33 ms  nlr-la-rtr-core-rtr-1.sc08.org [140.221.251.134]
      4    60 ms    58 ms    59 ms  seat-losa-49.layer3.nlr.net [216.24.186.13]
      5    62 ms    60 ms    64 ms  twaren-1-is-jmb-776.lsanca.pacificwave.net [207.231.241.133]
      6   294 ms   313 ms   313 ms  la-76-hc-gsr.twaren.net [211.79.48.229]
      7   250 ms   313 ms   312 ms  hc-76-v20.twaren.net [211.79.60.113]
      8   248 ms   313 ms   313 ms  140.110.1.1
    
    Trace complete.
                                 My traceroute  [v0.73]
    intrepid (0.0.0.0)                                     Sun Nov 16 00:54:03 2008
    Keys:  Help   Display mode   Restart statistics   Order of fields   quit
                                           Packets               Pings
     Host                                Loss%   Snt   Last   Avg  Best  Wrst StDev
     1. 172.21.253.2                      0.0%   259    0.3   0.3   0.2   6.1   0.4
     2. 140.110.1.1                       0.0%   259  226.3 279.1 221.1 1018.  61.5
    
    jazz@intrepid:~$ sudo iperf -c 140.110.240.192 -u
    ------------------------------------------------------------
    Client connecting to 140.110.240.192, UDP port 5001
    Sending 1470 byte datagrams
    UDP buffer size:   122 KByte (default)
    ------------------------------------------------------------
    [  3] local 172.21.253.152 port 33083 connected with 140.110.240.192 port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec
    [  3] Sent 892 datagrams
    [  3] Server Report:
    [ ID] Interval       Transfer     Bandwidth       Jitter   Lost/Total Datagrams
    [  3]  0.0- 9.9 sec  1.25 MBytes  1.05 Mbits/sec  2.526 ms    0/  891 (0%)
    [  3]  0.0- 9.9 sec  1 datagrams received out-of-order
    
    jazz@intrepid:~$ sudo iperf -c 140.110.240.192 -u -w 10M
    ------------------------------------------------------------
    Client connecting to 140.110.240.192, UDP port 5001
    Sending 1470 byte datagrams
    UDP buffer size:   244 KByte (WARNING: requested 10.0 MByte)
    ------------------------------------------------------------
    [  3] local 172.21.253.152 port 56643 connected with 140.110.240.192 port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec
    [  3] Sent 893 datagrams
    [  3] Server Report:
    [ ID] Interval       Transfer     Bandwidth       Jitter   Lost/Total Datagrams
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec  0.670 ms    0/  893 (0%)
    
  • 光纖網路:
    C:\>tracert 140.110.1.1
    
    Tracing route to 140.110.1.1 over a maximum of 30 hops
    
      1    <1 ms    <1 ms    <1 ms  A-rtr.1851.sc08.org [140.221.141.1]
      2    32 ms     1 ms    <1 ms  core-rtr-1-2-dnoc-rtr-2046-2.sc08.org [140.221.251.69]
      3    32 ms    32 ms    32 ms  nlr-la-rtr-core-rtr-1.sc08.org [140.221.251.134]
      4    58 ms    57 ms    57 ms  seat-losa-49.layer3.nlr.net [216.24.186.13]
      5    60 ms    59 ms    59 ms  twaren-1-is-jmb-776.lsanca.pacificwave.net [207.231.241.133]
      6   224 ms   225 ms   224 ms  la-76-tp-gsr.twaren.net [211.79.48.209]
      7   226 ms   226 ms   226 ms  hc-76-v20.twaren.net [211.79.60.113]
      8   227 ms   227 ms   227 ms  140.110.1.1
    
    Trace complete.
    
    jazz@intrepid:~$ sudo mtr 140.110.1.1
    
                                 My traceroute  [v0.73]
    intrepid (0.0.0.0)                                     Sun Nov 16 00:44:24 2008
    Resolver: Received error response 5. (refused by name server)elds   quit
                                           Packets               Pings
     Host                                Loss%   Snt   Last   Avg  Best  Wrst StDev
     1. 172.21.253.2                      0.0%   616    0.3   0.2   0.2   1.3   0.1
     2. 140.110.1.1                       0.0%   616  228.1 228.9 227.6 410.2  12.3
    
    jazz@intrepid:~$ sudo iperf -c 140.110.240.192 -u
    ------------------------------------------------------------
    Client connecting to 140.110.240.192, UDP port 5001
    Sending 1470 byte datagrams
    UDP buffer size:   122 KByte (default)
    ------------------------------------------------------------
    [  3] local 172.21.253.152 port 50095 connected with 140.110.240.192 port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec
    [  3] Sent 893 datagrams
    [  3] Server Report:
    [ ID] Interval       Transfer     Bandwidth       Jitter   Lost/Total Datagrams
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec  1.975 ms    0/  892 (0%)
    [  3]  0.0-10.0 sec  1 datagrams received out-of-order
    
    jazz@intrepid:~$ sudo iperf -c 140.110.240.192 -u -w 10M
    ------------------------------------------------------------
    Client connecting to 140.110.240.192, UDP port 5001
    Sending 1470 byte datagrams
    UDP buffer size:   244 KByte (WARNING: requested 10.0 MByte)
    ------------------------------------------------------------
    [  3] local 172.21.253.152 port 53022 connected with 140.110.240.192 port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec
    [  3] Sent 893 datagrams
    [  3] Server Report:
    [ ID] Interval       Transfer     Bandwidth       Jitter   Lost/Total Datagrams
    [  3]  0.0-10.0 sec  1.25 MBytes  1.05 Mbits/sec  1.827 ms    0/  893 (0%)
    
  • [DRBL] jfbterm Bug
  • [備註] 如果沒有裝 v86d 的話,當執行 modprobe uvesafb 時會在 dmesg 看到以下資訊
    [  703.839376] uvesafb: failed to execute /sbin/v86d
    [  703.840224] uvesafb: make sure that the v86d helper is installed and executable
    [  703.841494] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
    [  703.842307] uvesafb: vbe_init() failed with -22
    [  703.843019] uvesafb: probe of uvesafb.0 failed with error -22
    
  • [備註] 如果有裝 v86d 的話,當執行 modprobe uvesafb 時會在 dmesg 看到以下資訊
    [  268.848377] uvesafb: VMware, IncVMware virtual machine2.0, VMware virtual machine2.0, 2.0, OEM: V M ware, Inc. VBE support 2.0VMware, IncVMware virtual machine2.0, VBE v2.0
    [  268.884099] uvesafb: no monitor limits have been set, default refresh rate will be used
    [  268.885202] uvesafb: VBE state buffer size cannot be determined (eax=0x0, err=0)
    [  268.885265] uvesafb: scrolling: redraw
    [  268.896617] mtrr: your processor doesn't support write-combining
    [  268.909303] Console: switching to colour frame buffer device 128x48
    [  269.938085] uvesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000180000, using 16384k, total 16384k
    [  269.938101] fb0: VESA VGA frame buffer device
    
  • root@intrepid:~# modinfo uvesafb
    filename:       /lib/modules/2.6.27-7-server/kernel/drivers/video/uvesafb.ko
    description:    Framebuffer driver for VBE2.0+ compliant graphics boards
    author:         Michal Januszewski <spock@gentoo.org>
    license:        GPL
    srcversion:     21EDEFDED06E0673208A0D5
    depends:
    vermagic:       2.6.27-7-server SMP mod_unload modversions
    parm:           scroll:Scrolling mode, set to 'redraw', 'ypan', or 'ywrap' (scroll)
    parm:           vgapal:Set palette using VGA registers (invbool)
    parm:           pmipal:Set palette using PMI calls (bool)
    parm:           mtrr:Memory Type Range Registers setting. Use 0 to disable. (uint)
    parm:           blank:Enable hardware blanking (bool)
    parm:           nocrtc:Ignore CRTC timings when setting modes (bool)
    parm:           noedid:Ignore EDID-provided monitor limits when setting modes (bool)
    parm:           vram_remap:Set amount of video memory to be used [MiB] (uint)
    parm:           vram_total:Set total amount of video memoery [MiB] (uint)
    parm:           maxclk:Maximum pixelclock [MHz], overrides EDID data (ushort)
    parm:           maxhf:Maximum horizontal frequency [kHz], overrides EDID data (ushort)
    parm:           maxvf:Maximum vertical frequency [Hz], overrides EDID data (ushort)
    parm:           mode_option:Specify initial video mode as "<xres>x<yres>[-<bpp>][@<refresh>]" (charp)
    parm:           vbemode:VBE mode number to set, overrides the 'mode' option (ushort)
    parm:           v86d:Path to the v86d userspace helper. (string)
    
    root@intrepid:~# LANG=C apt-cache policy v86d
    v86d:
      Installed: 0.1.5-1ubuntu2
      Candidate: 0.1.5-1ubuntu2
      Version table:
     *** 0.1.5-1ubuntu2 0
            500 http://tw.archive.ubuntu.com intrepid/universe Packages
            100 /var/lib/dpkg/status
    
    root@intrepid:~# LANG=C apt-cache policy jfbterm
    jfbterm:
      Installed: 0.4.7-7.2
      Candidate: 0.4.7-7.2
      Version table:
     *** 0.4.7-7.2 0
            500 http://tw.archive.ubuntu.com intrepid/universe Packages
            100 /var/lib/dpkg/status
    
  • 追蹤 jfbterm 的 deb package 原始碼
    root@intrepid:~# apt-get source jfbterm
    root@intrepid:~# apt-get build-dep jfbterm
    
  • uvesafb 作者的推測:
    As to why the console becomes unresponsive after exiting jfbterm --
    jfbterm sets KD_GRAPHICS mode on the console on which it is started,
    and apparently fails to set it back to KD_TEXT before segfaulting.  This
    leaves the console in the broken state.