source: gpfs_3.1_ker2.6.20/share/man/man8/mmfsctl.8 @ 219

.TH mmfsctl 02/16/06
mmfsctl Command
.SH "Name"
.PP
\fBmmfsctl\fR - Issues a file system control request.
.SH "Synopsis"
.PP
\fBmmfsctl\fR \fIDevice\fR \fB{suspend | resume}\fR
.PP
Or,
.PP
\fBmmfsctl\fR \fIDevice\fR \fB{exclude | include}\fR
\fB{\fR\fB-d
"\fR\fIDiskName\fR\fB[;\fR\fIDiskName\fR\fB...]"
|\fR \fB-F\fR \fIDiskFile\fR | \fB-G\fR
\fIFailureGroup\fR\fB}\fR
.PP
Or,
.PP
\fBmmfsctl\fR \fIDevice\fR \fBsyncFSconfig\fR
\fB{\fR\fB-n\fR \fIRemoteNodesFile\fR | \fB-C\fR
\fIremoteClusterName\fR\fB}\fR [\fB-S\fR \fISpecFile\fR]
.SH "Description"
.PP
Use the \fBmmfsctl\fR command to issue control requests to a
particular GPFS file system. The command is used to temporarily suspend
the processing of all application I/O requests, and later resume them, as well
as to synchronize the file system's configuration state between peer
clusters in disaster recovery environments.
.PP
See
\fIEstablishing disaster recovery for your GPFS
cluster\fR in
\fIGeneral Parallel File
System: Advanced Administration Guide\fR.
.PP
Before creating a FlashCopy image of the file system, the user must run
\fBmmfsctl suspend\fR to temporarily quiesce all file system activity and
flush the internal buffers on all nodes that mount this file system.
The on-disk metadata will be brought to a consistent state, which provides for
the integrity of the FlashCopy snapshot. If a request to the file
system is issued by the application after the invocation of this command, GPFS
suspends this request indefinitely, or until the user issues \fBmmfsctl
resume\fR.
.PP
Once the FlashCopy image has been taken, the \fBmmfsctl resume\fR
command can be issued to resume the normal operation and complete any pending
I/O requests.
.PP
The \fBmmfsctl syncFSconfig\fR command extracts the file system's
related information from the local GPFS configuration data, transfers this
data to one of the nodes in the peer cluster, and attempts to import it
there.
.PP
Once the GPFS file system has been defined in the primary cluster, users run
this command to import the configuration of this file system into the peer
recovery cluster. After producing a FlashCopy image of the file system
and propagating it to the peer cluster using Peer-to-Peer Remote Copy (PPRC),
users similarly run this command to propagate any relevant configuration
changes made in the cluster after the previous snapshot.
.PP
The primary cluster configuration server of the peer cluster must be
available and accessible using remote shell and remote copy at the time of the
invocation of the \fBmmfsctl syncFSconfig\fR command. Also, the peer
GPFS clusters should be defined to use the same remote shell and remote copy
mechanism, and they must be set up to allow nodes in peer clusters to
communicate without the use of a password.
.PP
Not all administrative actions performed on the file system necessitate this
type of resynchronization. It is required only for those actions that
modify the file system information maintained in the local GPFS configuration
data, which includes:
.RS +3
.HP 3
\(bu Additions, removals, and replacements of disks (commands \fBmmadddisk\fR, \fBmmdeldisk\fR, \fBmmrpldisk\fR)
.HP 3
\(bu Modifications to disk attributes (command \fBmmchdisk\fR)
.HP 3
\(bu Changes to the file system's mount point (command \fBmmchfs -T\fR)
.HP 3
\(bu Changing the file system device name (command
\fBmmchfs
-W\fR)
.RE
.PP
The process of synchronizing the file system configuration data can
be automated by utilizing the \fBsyncfsconfig\fR user exit.
.PP
The \fBmmfsctl exclude\fR command is to be used only in a disaster recovery
environment, only after a disaster has occurred, and only after ensuring that
the disks in question have been physically disconnected. Otherwise,
unexpected results may occur.
.PP
The \fBmmfsctl exclude\fR command can be used to manually
override the file system descriptor quorum after a site-wide disaster.
See
\fIEstablishing disaster recovery for your GPFS
cluster\fR in
\fIGeneral Parallel File
System: Advanced Administration Guide\fR. This command
enables users to restore normal access to the file system with less than a
quorum of available file system descriptor replica disks, by effectively
excluding the specified disks from all subsequent operations on the file
system descriptor. After repairing the disks, the \fBmmfsctl
include\fR command can be issued to restore the initial quorum
configuration.
.SH "Parameters"
.PP
.RS +3
\fB\fIDevice\fR
\fR
.RE
.RS +9
The device name of the file system. File system names need not be
fully-qualified. \fBfs0\fR is just as acceptable as
\fB/dev/fs0\fR. If \fBall\fR is specified with the
\fBsyncFSconfig\fR option, this command is performed on all GPFS file
systems defined in the cluster.
.RE
.PP
.RS +3
\fBexclude
\fR
.RE
.RS +9
Instructs GPFS to exclude the specified group of disks from all
subsequent operations on the file system descriptor, and change their
availability state to \fBdown\fR, if the conditions in the Note below are
met. 
.PP
If necessary, this command assigns additional disks to serve as the disk
descriptor replica holders, and migrate the disk descriptor to the new replica
set. The excluded disks are not deleted from the file system, and still
appear in the output of the
\fBmmlsdisk\fR
command.
.RS +3
\fBNote:\fR
.RE
.RS +9
The \fBmmfsctl exclude\fR command is to be used only in a disaster
recovery environment, only after a disaster has occurred, and only after
ensuring that the disks in question have been physically disconnected.
Otherwise, unexpected results may occur.
.RE
.RE
.PP
.RS +3
\fBinclude
\fR
.RE
.RS +9
Informs GPFS that the previously excluded disks have become operational
again. This command writes the up-to-date version of the disk
descriptor to each of the specified disks, and clears the \fBexcl\fR
tag.
.RE
.PP
.RS +3
\fBresume
\fR
.RE
.RS +9
Instructs GPFS to resume the normal processing of I/O requests on all
nodes.
.RE
.PP
.RS +3
\fBsuspend
\fR
.RE
.RS +9
Instructs GPFS to flush the internal buffers on all nodes, bring the file
system to a consistent state on disk, and suspend the processing of all
subsequent application I/O requests.
.RE
.PP
.RS +3
\fBsyncFSconfig
\fR
.RE
.RS +9
Synchronizes the configuration state of a GPFS file system between the
local cluster and its peer in two-cluster disaster recovery
configurations.
.RE
.PP
.RS +3
\fB-C \fIremoteClusterName\fR
\fR
.RE
.RS +9
Specifies the name of the GPFS cluster that owns the remote GPFS file
system.
.RE
.PP
.RS +3
\fB-d
"\fIDiskName\fR\fB[;\fR\fIDiskName\fR\fB...]"\fR
\fR
.RE
.RS +9
Specifies the names of the NSDs to be included or excluded by the
\fBmmfsctl\fR command. Separate the names with semicolons (;)
and enclose the list of disk names in quotation marks.
.RE
.PP
.RS +3
\fB-F \fIDiskFile\fR
\fR
.RE
.RS +9
Specifies a file containing the names of the NSDs, one per line, to be
included or excluded by the \fBmmfsctl\fR command.
.RE
.PP
.RS +3
\fB-G \fIFailureGroup\fR
\fR
.RE
.RS +9
A number identifying the failure group for disks to be included or
excluded by the \fBmmfsctl\fR command.
.RE
.PP
.RS +3
\fB-n \fIRemoteNodesFile\fR
\fR
.RE
.RS +9
Specifies a list of contact nodes in the peer recovery cluster that GPFS
uses when importing the configuration data into that cluster. Although
any node in the peer cluster can be specified here, users are advised to
specify the identities of the peer cluster's primary and secondary
cluster configuration servers, for efficiency reasons.
.RE
.PP
.RS +3
\fB-S \fISpecFile\fR
\fR
.RE
.RS +9
Specifies the description of changes to be made to the file system, in the
peer cluster during the import step. The format of this file is
identical to that of the \fIChangeSpecFile\fR used as input to the \fBmmimportfs\fR command. This option can be used,
for example, to define the assignment of the NSD servers for use in the peer
cluster.
.RE
.SH "Options"
.PP
None.
.SH "Exit status"
.PP
.PP
.RS +3
\fB0
\fR
.RE
.RS +9
Successful completion.
.RE
.PP
.RS +3
\fBnonzero
\fR
.RE
.RS +9
A failure has occurred.
.RE
.SH "Results"
.PP
The \fBmmfsctl\fR command returns 0 if successful.
.SH "Security"
.PP
You must have root authority to run the \fBmmfsctl\fR command.
.PP
You may issue the \fBmmfsctl\fR command from any node in the GPFS
cluster.
.PP
When using the \fBrcp\fR and \fBrsh\fR commands for remote
communication, a properly configured \fB.rhosts\fR file must exist
in the root user's home directory on each node in the GPFS
cluster. If you have designated the use of a different remote
communication program on either the
\fBmmcrcluster\fR
or the
\fBmmchcluster\fR command, you must
ensure:
.RS +3
.HP 3
1. Proper authorization is granted to all nodes in the GPFS cluster.
.HP 3
2. The nodes in the GPFS cluster can communicate without the use of a
password, and without any extraneous messages.
.RE
.SH "Examples"
.PP
This sequence of commands creates a FlashCopy image of the file system and
propagates this image to the recovery cluster using the Peer-to-Peer Remote
Copy technology. The following configuration is assumed:
.br
.sp
.RS +0.1i
.nf
.TS
tab(~);
 l l.
Site~LUNs
Primary cluster (site A)~lunA1, lunA2
Recovery cluster (site B)~lunB1
.TE
.sp
.fi
.RE
.PP
.RS +3
\fBlunA1
\fR
.RE
.RS +9
FlashCopy source
.RE
.PP
.RS +3
\fBlunA2
\fR
.RE
.RS +9
FlashCopy target, PPRC source
.RE
.PP
.RS +3
\fBlunB1
\fR
.RE
.RS +9
PPRC target
.RE
.PP
A single GPFS file system named \fBfs0\fR has been defined in the
primary cluster over lunA1.
.RS +3
.HP 3
1. In the primary cluster, suspend all file system I/O activity and flush the
GPFS buffers
.sp
.nf
mmfsctl fs0 suspend
.fi
.sp
.sp
The output is similar to this:
.sp
.nf
Writing dirty data to disk
Quiescing all file system operations
Writing dirty data to disk again
.fi
.sp
.HP 3
2. Establish a FlashCopy pair using lunA1 as the source and lunA2 as the
target.
.HP 3
3. Resume the file system I/O activity: 
.sp
.nf
mmfsctl fs0 resume
.fi
.sp
.sp
The output is similar to this:
.sp
.nf
Resuming operations.
.fi
.sp
.HP 3
4. Establish a Peer-to-Peer Remote Copy (PPRC) path and a synchronous PPRC
volume pair lunA2-lunB1 (primary-secondary). Use the 'copy entire
volume' option and leave the 'permit read from secondary'
option disabled.
.HP 3
5. Wait for the completion of the FlashCopy background task. Wait for
the PPRC pair to reach the duplex (fully synchronized) state.
.HP 3
6. Terminate the PPRC volume pair lunA2-lunB1.
.HP 3
7. If this is the first time the snapshot is taken, or if the configuration
state of \fBfs0\fR changed since the previous FlashCopy snapshot, propagate
the most recent configuration to site B: 
.sp
.nf
mmfsctl fs0 syncFSconfig -n recovery_clust_nodelist
.fi
.sp
.RE
.SH "Location"
.PP
\fB/usr/lpp/mmfs/bin\fR
.PP