source: gpfs_3.1_ker2.6.20/share/man/man8/mmchconfig.8 @ 195

.TH mmchconfig 12/01/06
mmchconfig Command
.SH "Name"
.PP
\fBmmchconfig\fR - Changes GPFS configuration parameters.
.SH "Synopsis"
.PP
\fBmmchconfig\fR
\fIAttribute\fR=\fIvalue\fR[,\fIAttribute\fR=\fIvalue\fR...]
[\fB-i\fR | \fB-I\fR]  [\fB-N
{\fR\fINode\fR[,\fINode\fR...] |
\fINodeFile\fR | \fINodeClass\fR}]
.SH "Description"
.PP
Use the \fBmmchconfig\fR command to change the GPFS configuration
attributes on a single node, a set of nodes, or globally for the entire
cluster.
.PP
The \fIAttribute\fR=\fIvalue\fR flags must come before any
operand.
.PP
When changing both \fBmaxblocksize\fR and \fBpagepool\fR, the command
fails unless these conventions are followed:
.RS +3
.HP 3
\(bu When increasing the values, \fBpagepool\fR must be specified
first.
.HP 3
\(bu When decreasing the values, \fBmaxblocksize\fR must be specified
first.
.RE
.PP
\fBResults\fR
.PP
The configuration is updated on each node in the GPFS cluster.
.SH "Parameters"
.PP
.RS +3
\fB-N {\fINode\fR[,\fINode\fR...] |
\fINodeFile\fR | \fINodeClass\fR}
\fR
.RE
.RS +9
Specifies the set of nodes to which the configuration changes
apply. 
.PP
The \fB-N\fR flag is valid only for the \fBautomountDir\fR,
\fBdataStructureDump\fR, \fBdesignation\fR, \fBdmapiEventTimeout\fR,
\fBdmapiMountTimeout\fR, \fBdmapiSessionFailureTimeout\fR,
\fBmaxblocksize\fR, \fBmaxFilesToCache\fR, \fBmaxStatCache\fR,
\fBnsdServerWaitTimeWindowOnMount\fR, \fBnsdServerWaitTimeForMount\fR,
\fBpagepool\fR, \fBprefetchThreads\fR, \fBunmountOnDiskFail\fR, and
\fBworker1Threads\fR attributes.
.PP
This command does not support a \fINodeClass\fR of
\fBmount\fR.
.RE
.SH "Options"
.PP
.RS +3
\fB\fIAttribute\fR 
\fR
.RE
.RS +9
The name of the attribute to be changed to the specified
\fIvalue\fR. More than one attribute and value pair, in a
comma-separated list, can be changed with one invocation of the
command.
.PP
To restore the GPFS default setting for any given attribute, specify
\fBDEFAULT\fR as its \fIvalue\fR.
.RE
.PP
.RS +3
\fBautoload
\fR
.RE
.RS +9
Starts GPFS automatically whenever the nodes are rebooted. Valid
values are \fByes\fR or \fBno\fR.
.RE
.PP
.RS +3
\fBautomountdir
\fR
.RE
.RS +9
Specifies the directory to be used by the Linux automounter for
GPFS file systems that are being automatically mounted. The default
directory is \fB/gpfs/myautomountdir\fR. This parameter does not
apply to AIX environments.
.RE
.PP
.RS +3
\fBcipherList
\fR
.RE
.RS +9
Controls whether GPFS network communications are secured. If
\fBcipherList\fR is not specified, or if the value \fBDEFAULT\fR is
specified, GPFS does not authenticate or check authorization for network
connections. If the value \fBAUTHONLY\fR is specified, GPFS does
authenticate and check authorization for network connections, but data sent
over the connection is not protected. Before setting
\fBcipherList\fR for the first time, you must establish a public/private
key pair for the cluster by using the \fBmmauth genkey new\fR
command.
.PP
See the Frequently Asked Questions at:
publib.boulder.ibm.com/infocenter/
clresctr/topic/com.ibm.cluster.gpfs.doc/gpfs_faqs/gpfsclustersfaq.html
for a list of the ciphers supported by GPFS.
.RE
.PP
.RS +3
\fBdataStructureDump
\fR
.RE
.RS +9
Specifies a path for the storage of dumps. The default is to store
dumps in \fB/tmp/mmfs\fR. Specify \fBno\fR to not store
dumps. 
.PP
It is suggested that you create a directory for the placement of certain
problem determination information. This can be a symbolic link to
another location if more space can be found there. Do not place it in a
GPFS file system, because it might not be available if GPFS fails. If a
problem occurs, GPFS may write 200 MB or more of problem determination data
into the directory. These files must be manually removed when problem
determination is complete. This should be done promptly so that a
\fBNOSPACE\fR condition is not encountered if another failure
occurs.
.RE
.PP
.RS +3
\fBdesignation
\fR
.RE
.RS +9
Specifies a '-' separated list of node roles.
.RS +3
.HP 3
\(bu \fBmanager\fR or \fBclient\fR - Indicates whether a node is
part of the pool of nodes from which configuration managers, file system
managers, and token managers are selected.
.HP 3
\(bu \fBquorum\fR or \fBnonquorum\fR - Indicates whether a node is to be
counted as a quorum node.
.RE
.PP
GPFS must be stopped on any quorum node that is being changed to
nonquorum. GPFS does not have to stopped when the designation changes
from nonquorum to quorum.
.PP
For more information on the roles of a node as the file system manager, see
the \fIGeneral Parallel File System: Concepts, Planning, and
Installation Guide\fR and search for \fIfile system manager\fR.
.PP
For more information on explicit quorum node designation, see the
\fIGeneral Parallel File System: Concepts, Planning, and Installation
Guide\fR and search for \fIdesignating quorum nodes\fR.
.RE
.PP
.RS +3
\fBdistributedTokenServer
\fR
.RE
.RS +9
Specifies whether the token server role for a file system should be
limited to only the file system manager node (\fBno\fR), or distributed to
other nodes for better file system performance (\fByes\fR). The
default is \fByes\fR.
.PP
Using multiple token servers requires designating the nodes that should
serve tokens as manager nodes (\fBmanager\fR keyword in the
\fBmmcrcluster\fR node list or \fBmmchconfig
designation=...\fR commands). If no manager
nodes are designated, the node chosen as file system manager will act as the
only token server, regardless of the setting of the
\fBdistributedTokenServer\fR parameter.
.PP
The \fBmaxFilesToCache\fR and \fBmaxStatCache\fR parameters are
indirectly affected by the \fBdistributedTokenServer\fR parameter, because
distributing the tokens across multiple nodes may allow keeping more tokens
than without this feature. See \fIGeneral Parallel File System:
Concepts, Planning, and Installation Guide\fR and search on \fIThe GPFS
token system's affect on cache settings\fR.
.RE
.PP
.RS +3
\fBdmapiEventTimeout
\fR
.RE
.RS +9
Controls the blocking of file operation threads of NFS, while in the
kernel waiting for the handling of a DMAPI synchronous event. The
parameter value is the maximum time, in milliseconds, the thread will
block. When this time expires, the file operation returns
\fBENOTREADY\fR, and the event continues asynchronously. The NFS
server is expected to repeatedly retry the operation, which eventually will
find the response of the original event and continue. This mechanism
applies only to read, write, and truncate event types, and only when such
events come from NFS server threads. The timeout value is given in
milliseconds. The value 0 indicates immediate timeout (fully
asynchronous event). A value greater than or equal to 86400000 (which
is 24 hours) is considered \fIinfinity\fR (no timeout, fully synchronous
event). The default value is 86400000.
.PP
For further information regarding DMAPI for GPFS, see \fIGeneral Parallel
File System: Data Management API Guide\fR.
.RE
.PP
.RS +3
\fBdmapiMountTimeout
\fR
.RE
.RS +9
Controls the blocking of \fBmount\fR operations, waiting for a
disposition for the mount event to be set. This timeout is activated,
at most once on each node, by the first external mount of a file system that
has DMAPI enabled, and only if there has never before been a mount
disposition. Any \fBmount\fR operation on this node that starts
while the timeout period is active will wait for the mount disposition.
The parameter value is the maximum time, in seconds, that the \fBmount\fR
operation will wait for a disposition. When this time expires and there
is still no disposition for the mount event, the \fBmount\fR operation
fails, returning the \fBEIO\fR error. The timeout value is given in
full seconds. The value 0 indicates immediate timeout (immediate
failure of the mount operation). A value greater than or equal to 86400
(which is 24 hours) is considered \fIinfinity\fR (no timeout, indefinite
blocking until the there is a disposition). The default value is
60.
.PP
For further information regarding DMAPI for GPFS, see \fIGeneral Parallel
File System: Data Management API Guide\fR.
.RE
.PP
.RS +3
\fBdmapiSessionFailureTimeout
\fR
.RE
.RS +9
Controls the blocking of file operation threads, while in the kernel,
waiting for the handling of a DMAPI synchronous event that is enqueued on a
session that has experienced a failure. The parameter value is the
maximum time, in seconds, the thread will wait for the recovery of the failed
session. When this time expires and the session has not yet recovered,
the event is cancelled and the file operation fails, returning the
\fBEIO\fR error. The timeout value is given in full seconds.
The value 0 indicates immediate timeout (immediate failure of the file
operation). A value greater than or equal to 86400 (which is 24 hours)
is considered \fIinfinity\fR (no timeout, indefinite blocking until the
session recovers). The default value is 0.
.PP
For further information regarding DMAPI for GPFS, see \fIGeneral Parallel
File System: Data Management API Guide\fR.
.RE
.PP
.RS +3
\fBmaxblocksize
\fR
.RE
.RS +9
Changes the maximum file system block size. Valid values include 64
KB, 256 KB, 512 KB, and 1024 KB. The default value is 1024 KB.
Specify this value with the character \fBK\fR or \fBM\fR, for example
512K.
.PP
File systems with block sizes larger than the specified value cannot be
created or mounted unless the block size is increased.
.RE
.PP
.RS +3
\fBmaxFilesToCache
\fR
.RE
.RS +9
Specifies the number of inodes to cache for recently used files that have
been closed. 
.PP
Storing a file's inode in cache permits faster re-access to the
file. The default is 1000, but increasing this number may improve
throughput for workloads with high file reuse. However, increasing this
number excessively may cause paging at the file system manager node.
The value should be large enough to handle the number of concurrently open
files plus allow caching of recently used files.
.RE
.PP
.RS +3
\fBmaxMBpS
\fR
.RE
.RS +9
Specifies an estimate of how many megabytes of data can be transferred per
second into or out of a single node. The default is 150 MB per
second. The value is used in calculating the amount of I/O that can be
done to effectively prefetch data for readers and write-behind data from
writers. By lowering this value, you can artificially limit how much
I/O one node can put on all of the disk servers. 
.PP
This is useful in environments in which a large number of nodes can overrun
a few virtual shared disk servers. Setting this value too high usually
does not cause problems because of other limiting factors, such as the size of
the pagepool, the number of prefetch threads, and so forth.
.RE
.PP
.RS +3
\fBmaxStatCache
\fR
.RE
.RS +9
Specifies the number of inodes to keep in the stat cache. The stat
cache maintains only enough inode information to perform a query on the file
system. The default value is: 
.PP
\fB4 x maxFilesToCache\fR
.RE
.PP
.RS +3
\fBnsdServerWaitTimeForMount
\fR
.RE
.RS +9
When mounting a file system whose disks depend on NSD servers, this option
specifies the number of seconds to wait for those servers to come up.
The decision to wait is controlled by the criteria managed by the
\fBnsdServerWaitTimeWindowOnMount\fR option.
.PP
Valid values are between 0 and 1200 seconds. The default is
300. A value of zero indicates that no waiting is done. The
interval for checking is 10 seconds. If
\fBnsdServerWaitTimeForMount\fR is 0,
\fBnsdServerWaitTimeWindowOnMount\fR has no effect.
.PP
The mount thread waits when the daemon delays for safe recovery. The
mount wait for NSD servers to come up, which is covered by this option, occurs
after expiration of the recovery wait allows the mount thread to
proceed.
.RE
.PP
.RS +3
\fBnsdServerWaitTimeWindowOnMount
\fR
.RE
.RS +9
Specifies a window of time (in seconds) during which a mount can wait for
NSD servers as described for the \fBnsdServerWaitTimeForMount\fR
option. The window begins when quorum is established (at cluster
startup or subsequently), or at the last known failure times of the NSD
servers required to perform the mount. 
.PP
Valid values are between 1 and 1200 seconds. The default is
600. If \fBnsdServerWaitTimeForMount\fR is 0,
\fBnsdServerWaitTimeWindowOnMount\fR has no effect.
.PP
When a node rejoins the cluster after having been removed for any reason,
the node resets all the failure time values that it knows about.
Therefore, when a node rejoins the cluster it believes that the NSD servers
have not failed. From the node's perspective, old failures are no
longer relevant.
.PP
GPFS checks the cluster formation criteria first. If that check
falls outside the window, GPFS then checks for NSD server fail times being
within the window.
.RE
.PP
.RS +3
\fBpagepool
\fR
.RE
.RS +9
Changes the size of the cache on each node. The default value is 64
M. The minimum allowed value is 4 M. The maximum allowed value
depends on amount of the available physical memory and your operating
system. Specify this value with the character \fBM\fR, for example,
60M.
.RE
.PP
.RS +3
\fBprefetchThreads
\fR
.RE
.RS +9
Controls the maximum possible number of threads dedicated to prefetching
data for files that are read sequentially, or to handle sequential
write-behind. 
.PP
Functions in the GPFS daemon dynamically determine the actual degree of
parallelism for prefetching data. The minimum value is 2. The
default value is 72. The maximum value of \fBprefetchThreads\fR plus
\fBworker1Threads\fR is: 
.RS +3
.HP 3
\(bu On 32-bit kernels, 164
.HP 3
\(bu On 64-bit kernels, 550
.RE
.RE
.PP
.RS +3
\fBsubnets
\fR
.RE
.RS +9
Specifies subnets used to communicate between nodes in a GPFS
cluster.
.PP
Enclose the subnets in quotes and separate them by spaces. The order
in which they are specified determines the order that GPFS uses these subnets
to establish connections to the nodes within the cluster. For example,
\fBsubnets="192.168.2.0"\fR refers to IP addresses
192.168.2.0 through 192.168.2.255
inclusive.
.PP
An optional list of cluster names may also be specified, separated by
commas. The names may contain wild cards similar to those accepted by
shell commands. If specified, these names override the list of private
IP addresses. For example,
\fBsubnets="10.10.10.0/remote.cluster;192.168.2.0"\fR.
.PP
This feature cannot be used to establish fault tolerance or automatic
failover. If the interface corresponding to an IP address in the list
is down, GPFS does not use the next one on the list. For more
information about subnets, see \fIGeneral Parallel File System:
Advanced Administration Guide\fR and search on \fIUsing remote access with
public and private IP addresses\fR.
.RE
.PP
.RS +3
\fBtiebreakerDisks
\fR
.RE
.RS +9
Controls whether GPFS will use the node quorum with tiebreaker algorithm
in place of the regular node based quorum algorithm. See \fIGeneral
Parallel File System: Concepts, Planning, and Installation Guide\fR
and search for \fInode quorum with tiebreaker\fR. To enable this
feature, specify the names of one or three disks. Separate the NSD
names with semicolon (;) and enclose the list in quotes. The disks
do not have to belong to any particular file system, but must be directly
accessible from the quorum nodes. For example:
.sp
.nf
tiebreakerDisks="gpfs1nsd;gpfs2nsd;gpfs3nsd"\ 
.fi
.sp
.PP
To disable this feature, use: 
.sp
.nf
tiebreakerDisks=no
.fi
.sp
.PP
When changing the \fBtiebreakerDisks\fR, GPFS must be down on all nodes
in the cluster.
.RE
.PP
.RS +3
\fBuidDomain
\fR
.RE
.RS +9
Specifies the UID domain name for the cluster.
.PP
A detailed description of the GPFS user ID remapping convention is
contained in \fI\fIUID Mapping for GPFS in a Multi-Cluster
Environment\fR\fR at
www.ibm.com/servers/eserver/clusters/library/wp_aix_lit.html.
.RE
.PP
.RS +3
\fBunmountOnDiskFail
\fR
.RE
.RS +9
Controls how the GPFS daemon will respond when a disk failure is
detected. Valid values are \fByes\fR or \fBno\fR. 
.PP
When \fBunmountOnDiskFail\fR is set to \fBno\fR, the daemon marks the
disk as failed and continues as long as it can without using the disk.
All nodes that are using this disk are notified of the disk failure.
The disk can be made active again by using the \fBmmchdisk\fR
command. This is the suggested setting when metadata and data
replication are used because the replica can be used until the disk is brought
online again.
.PP
When \fBunmountOnDiskFail\fR is set to \fByes\fR, any disk failure
will cause only the local node to force-unmount the file system that contains
that disk. Other file systems on this node and other nodes continue to
function normally, if they can. The local node can try and remount the
file system when the disk problem has been resolved. This is the
suggested setting when using SAN-attached disks in large multinode
configurations, and when replication is not being used. This setting
should also be used on a node that hosts \fBdescOnly\fR disks. See
\fIEstablishing disaster recovery for your GPFS cluster\fR in
\fIGeneral Parallel File System: Advanced Administration
Guide\fR.
.RE
.PP
.RS +3
\fBworker1Threads
\fR
.RE
.RS +9
Controls the maximum number of concurrent file operations at any one
instant. If there are more requests than that, the excess will wait
until a previous request has finished.
.PP
The primary use is for: random read or write requests that cannot be
prefetched, random I/O requests, or small file activity. The minimum
value is 1. The default value is 48. The maximum value of
\fBprefetchThreads\fR plus \fBworker1Threads\fR is: 
.RS +3
.HP 3
\(bu On 32-bit kernels, 164
.HP 3
\(bu On 64-bit kernels, 550
.RE
.RE
.PP
.RS +3
\fB-I
\fR
.RE
.RS +9
Specifies that the changes take effect immediately but do not persist when
GPFS is restarted. This option is valid only for the
\fBdataStructureDump\fR, \fBdmapiEventTimeout\fR,
\fBdmapiSessionFailureTimeout\fR, \fBdmapiMountTimeoout\fR,
\fBmaxMBpS\fR, \fBunmountOnDiskFail\fR, and \fBpagepool\fR
attributes.
.RE
.PP
.RS +3
\fB-i
\fR
.RE
.RS +9
Specifies that the changes take effect immediately and are
permanent. This option is valid only for the
\fBdataStructureDump\fR, \fBdmapiEventTimeout\fR,
\fBdmapiSessionFailureTimeout\fR, \fBdmapiMountTimeoout\fR,
\fBmaxMBpS\fR, \fBunmountOnDiskFail\fR, and \fBpagepool\fR
attributes.
.RE
.SH "Exit status"
.PP
.PP
.RS +3
\fB0
\fR
.RE
.RS +9
Successful completion.
.RE
.PP
.RS +3
\fBnonzero
\fR
.RE
.RS +9
A failure has occurred.
.RE
.SH "Security"
.PP
You must have root authority to run the \fBmmchconfig\fR command.
.PP
You may issue the \fBmmchconfig\fR command from any node in the GPFS
cluster.
.PP
When using the \fBrcp\fR and \fBrsh\fR commands for remote
communication, a properly configured \fB.rhosts\fR file must exist
in the root user's home directory on each node in the GPFS
cluster. If you have designated the use of a different remote
communication program on either the \fBmmcrcluster\fR or the
\fBmmchcluster\fR command, you must ensure:
.RS +3
.HP 3
1. Proper authorization is granted to all nodes in the GPFS cluster.
.HP 3
2. The nodes in the GPFS cluster can communicate without the use of a
password, and without any extraneous messages.
.RE
.SH "Examples"
.PP
To change the maximum file system block size allowed to 512 KB, issue this
command:
.sp
.nf
mmchconfig maxblocksize=512K
.fi
.sp
.PP
To confirm the change, issue this command:
.sp
.nf
mmlsconfig
.fi
.sp
.PP
The system displays information similar to:
.sp
.nf
Configuration data for cluster cluster.kgn.ibm.com:
-----------------------------------------------------------
clusterName cluster.kgn.ibm.com
clusterId 680681562216850737
clusterType lc
multinode yes
autoload no
useDiskLease yes
maxFeatureLevelAllowed 901
maxblocksize 512K
File systems in cluster cluster.kgn.ibm.com:
----------------------------------------------------
/dev/fs1
.fi
.sp
.SH "See also"
.PP
mmaddnode Command
.PP
mmcrcluster Command
.PP
mmdelnode Command
.PP
mmlsconfig Command
.PP
mmlscluster Command
.SH "Location"
.PP
\fB/usr/lpp/mmfs/bin\fR