source: gpfs_3.1_ker2.6.20/lpp/mmfs/samples/nsddevices.sample @ 108

#!/bin/ksh
# @(#)53        1.5  src/avs/fs/mmfs/ts/config/nsddevices.sample, mmfs, avs_rgpfs24, rgpfs240610b 8/9/04 16:51:23 
##############################################################################
#
# When properly installed, this script is invoked by the 
# /usr/lpp/mmfs/bin/mmdevdiscover script.  
#
# INSTALLATION GUIDELINES FOR THIS SCRIPT:
#
#   a) edit this script using the configuration guidelines below
#   b) copy this script to /var/mmfs/etc/nsddevices
#   c) ensure this script is executable (chmod +x /var/mmfs/etc/nsddevices)
#
# DESCRIPTION OF NSD DEVICE DISCOVERY:
#
#   The mmdevdiscover script and conversely this script are invoked by 
#   the mmfsd daemon when it tries to discover or verify physical 
#   devices previously defined to GPFS with the mmcrnsd command.  These
#   scripts identify devices found in the /dev file system on the local 
#   machine that may correlate to NSDs defined to GPFS.  
#
#   GPFS uses the list of devices output by these scripts in mapping 
#   the NSD name listed in the configuration database to a local device 
#   in the /dev file system.  When an NSD is created via the mmcrnsd 
#   command it is marked with a unique identifier written to sector
#   two of the device.  This unique identifier is recorded in the 
#   configuration database along with the user recognizable NSD name.
#
#   During GPFS disk discovery each device name output by mmdevdiscover
#   and nsddevices is opened in turn and sector two of each device is 
#   read.   If a match between an NSD identifier on the device and an
#   identifier recorded in the configuration database is found, then
#   this machine has local access to the NSD device.  I/O is thus 
#   subsequently performed via this local /dev interface.
#
# CONFIGURATION AND EDITING GUIDELINES:
#
#   If this script is not installed then disk discovery is done 
#   only via the commands listed in mmdevdiscover.
#
#   If this script is installed and returns a NON ZERO return code
#   then the disk discovery commands listed in mmdevdiscover will ALSO
#   be run.
#
#   If this script is installed and returns a ZERO return code
#   then the disk discovery commands listed in mmdevdiscover will NOT
#   be run.
#
#   The output from both this script and nsddevices is a number 
#   of lines in the following format:
#
#     deviceName deviceType
#
#   where (deviceName) is a device name such as (hdisk1)
#   and (deviceType) is a set of known disk types.  Consult
# 
#     /usr/lpp/mmfs/bin/mmdevdiscover
#
#   for a list of currently known deviceTypes
#
#   Example output:
#
#     hdisk1  hdisk
#     hdisk2  hdisk
#
##############################################################################

osName=$(/bin/uname -s)

if [[ $osName = Linux ]]
then
  : # Add function to discover disks in the Linux environment.
fi

if [[ $osName = AIX ]]
then
  : # Add function to discover disks in the AIX environment.
fi

# To bypass the GPFS disk discovery (/usr/lpp/mmfs/bin/mmdevdiscover),
# return 0

# To continue with the GPFS disk discovery steps,
# return 1