source: gpfs_3.1_ker2.6.20/lpp/mmfs/samples/debugtools/tsfilehist.awk @ 16

Last change on this file since 16 was 16, checked in by rock, 16 years ago
  • Property svn:executable set to *
File size: 10.3 KB
Line 
1#! /usr/bin/awk -f
2# /usr/lpp/mmfs/samples/util/tsinode $mountpoint > $fsname.files
3#   (the output file will be about 170*#ofFiles,
4#    so be sure you have plenty of space, or pipe it into tsfilehist.awk)
5#
6# Usage: tsfilehist.awk [variable-overrides] $fsname.files > $fsname.filesummary
7#   nbuckets=#buckets-for-histogram          (default 100)
8#   blocksize=[16 64 256 384 512 1024 4096]  (default 256)
9#   availablespace=size-of-filesystem   (bytes, or with suffix {s|k|m|g})
10#     (if specified, the AvSpace%ile column will show % of available space)
11#   migrated=1    (if files could be migrated out by HSM)
12BEGIN {
13  if (ARGC<1)
14  {
15    print "Usage: tsfilehist.awk [variable-overrides] $fsname.files > $fsname.filesummary"
16    print "       nbuckets=#buckets-for-histogram          (default 100)"
17    print "       blocksize=[16 64 256 384 512 1024 4096]  (default 256)"
18    print "       availablespace=size-of-filesystem   (bytes, or with suffix {s|k|m|g})"
19    print "       migrated=1    (if files could be migrated out by HSM)"
20    terminate=1
21    exit 1
22  }
23
24  nbuckets=100
25  availablespace=0 # unknown at start
26  migrated=0
27#  SIZ = logical size BKS = blocksize of filesystem SUB = sub-block size
28  SIZ[4096]="4M";  BKS[4096]=4194304; SUB[4096]=131072
29  SIZ[1024]="1M";  BKS[1024]=1048576; SUB[1024]=32768
30  SIZ[512]="512K"; BKS[512]=524288;   SUB[512]=16384
31  SIZ[384]="384K"; BKS[384]=393216;   SUB[384]=12288
32  SIZ[256]="256K"; BKS[256]=262144;   SUB[256]=8192
33  SIZ[64]="64K";   BKS[64]=65536;     SUB[64]=2048
34  SIZ[16]="16K";   BKS[16]=16384;     SUB[16]=512
35}
36{
37#  sample output:
38#    inode     gen    uid    gid       size      space     mode nlink      atime               mtime               ctime        flags
39#    30721   65536    100    100    8037722    8044544 -rwxr-xr-x 1 1085616373.647071599 1085609949.810665286 1085609949.810665286 replmeta ind=2
40#
41# parse input
42  if ($1 == "inode") # first line
43  {
44    if (blocksize == 0) blocksize = 256
45    else if (SIZ[blocksize] == "")
46    {
47      print "Unexpected blocksize", blocksize
48      exit 1
49    }
50  }
51  else  if ($1 == "" || index($0,"logfile") != 0 || index($0,"reserved") != 0)
52    ; #throw away lines
53  else if ((substr($7,1,1) == "-" || substr($7,1,1) == "l" || substr($7,1,1) == "d"))
54  {
55    entries += 1;
56
57    if (substr($7,1,1) == "d")  # directories
58    {
59      directories += 1;
60      space=$6
61      if (availablespace != 0)
62        totsize+=space;
63    }
64    else    # files
65    {
66      files++
67      size=$5
68      space=$6
69      if (index($0,"repldata") != 0) space /= 2
70      if (size > maxsize) maxsize = size
71      if (size == 0)
72        zerolen++
73      else if (migrated && space == 0)  # Presumed to be a migrated file
74      {
75        migratedfiles++
76        migratedsize+=size
77        blks=int(size/BKS[blocksize]);
78        frag=size%BKS[blocksize];
79        subb=int(frag/SUB[blocksize]);
80        subf=size%SUB[blocksize];
81        if (subf > 0)
82          subb += 1;
83        if (blks == 0)
84          msubblarray[subb] += 1;
85        else if (blks == 1 && frag == 0)
86          msubblarray[32] += 1;
87        else if (blks <= nbuckets)
88          mdiskarray[blks] += 1;
89        else
90          mdiskarray[nbuckets+1] += 1;
91      }
92      else # if (space > 0)
93      {
94        if (space > size)
95          totalactualwaste += space-size
96        totsize+=size;
97        blks=int(size/BKS[blocksize]);
98        frag=size%BKS[blocksize];
99        subb=int(frag/SUB[blocksize]);
100        subf=size%SUB[blocksize];
101        if (subf > 0) 
102        {
103          totwaste += SUB[blocksize]-subf;
104          subb += 1;
105        }
106        if (blks == 0)
107          subblarray[subb] += 1;
108        else if (blks == 1 && frag == 0)
109          subblarray[32] += 1;
110        else if (blks <= nbuckets)
111          diskarray[blks] += 1;
112        else
113          diskarray[nbuckets+1] += 1;
114        if (blks > 67) ind64++
115        if (blks > 32) ind32++
116      }
117    }
118  }
119  else
120    entries += 1;
121}
122
123END {
124  if (terminate) exit 1
125  unit[1]="GB";
126  unit[2]="TB";
127  unit[3]="PB";
128  printf ("\nAll: Files       = %14d\n",files)
129  if (availablespace != 0)
130  {
131    lastav=substr(availablespace,length(availablespace))
132    if (lastav == "s" || lastav == "S") availablespace *= 512
133    else if (lastav == "k" || lastav == "K") availablespace *= 1024
134    else if (lastav == "m" || lastav == "M") availablespace *= 1024*1024
135    else if (lastav == "g" || lastav == "G") availablespace *= 1024*1024*1024
136    printf ("Available space  = %14d",availablespace)
137    tot=int((availablespace+500000000)/1000000000)
138    for (i=1; (tot > 0) && (i <= 3); i++)
139    {
140      printf ("%12d %s",tot, unit[i])
141      tot=int((tot+500)/1000)
142    }
143    printf ("\n")
144  }
145  printf ("Total Size       = %14d",totsize)
146  tot=int((totsize+500000000)/1000000000)
147  for (i=1; (tot > 0) && (i <= 3); i++)
148  {
149    printf ("%12d %s",tot, unit[i])
150    tot=int((tot+500)/1000)
151  }
152
153  printf ("\nLargest File     = %14d\n",maxsize);
154  printf ("Average Size     = %14d\n",totsize/files);
155  printf ("\nNon-zero: Files  = %14d\n",files-zerolen);
156  printf ("Average NZ size  = %14d\n",totsize/(files-zerolen));
157  if (migratedsize > 0)
158  {
159    printf ("\nMigrated: Files  = %14d\n",migratedfiles);
160    printf ("Total Mig size   = %14d",migratedsize);
161    tot=int((migratedsize+500000000)/1000000000);
162    for (i=1; (tot > 0) && (i <= 3); i++)
163    {
164      printf ("%12d %s",tot, unit[i]);
165      tot=int((tot+500)/1000);
166    }
167    printf ("\nAverage Mig size = %14d\n",migratedsize/migratedfiles);
168    printf ("Average All size = %14d\n",(totsize+migratedsize)/files);
169  }
170
171  printf ("\nDirectories         = %11d\n",directories);
172  printf ("Avg Entries per dir = %11.1f\n",(entries-1)/directories);
173
174  printf ("\nFiles with indirect blocks        = %11d\n", ind64);
175  printf ("Files with indirect blocks (wide) = %11d\n", ind32);
176
177  printf ("\nFile%%ile represents the cummulative percentage of files.\n");
178  printf ("Space%%ile represents the cummulative percentage of total space used.\n");
179  printf ("AvlSpc%%ile represents the cummulative percentage used of total available space.\n");
180  printf ("\nHistogram of files <= one %s block in size\n", SIZ[blocksize])
181  printf ("Subblocks    Count  File%%ile  Space%%ile");
182  if (availablespace > 0)
183    printf (" AvlSpc%%ile");
184  printf ("\n--------- -------- ---------- ----------");
185  if (availablespace > 0) printf ("  ----------");
186  printf ("\n");
187  subblarray[0] = zerolen;
188  for (j=0; j<=32; j++)
189  {
190    Faccum += subblarray[j];
191    Baccum += j*subblarray[j]*SUB[blocksize];
192    printf ("%9d%9d", j, subblarray[j]);
193    printf ("%10.2f%%%10.2f%%", 100*Faccum/(files-migratedfiles), 100*Baccum/totsize);
194    if (availablespace > 0)
195      printf (" %10.2f%%", 100*Baccum/availablespace);
196    printf ("\n");
197  }
198
199  printf ("\nHistogram of files with N %s blocks (plus end fragment)\n", SIZ[blocksize]);
200  printf ("   Blocks    Count  File%%ile  Space%%ile");
201  if (availablespace > 0)
202    printf (" AvlSpc%%ile");
203  printf ("\n--------- -------- ---------- ----------");
204  if (availablespace > 0) printf ("  ----------");
205  printf ("\n");
206  for (j=1; j<=nbuckets; j++)
207  {
208    if (diskarray[j] > 0)
209    {
210      printf ("%9d",j);
211      printf("%9d", diskarray[j]);
212      Faccum += diskarray[j];
213      Baccum += j*diskarray[j]*BKS[blocksize];
214      printf ("%10.2f%%%10.2f%%", 100*Faccum/(files-migratedfiles), 100*Baccum/totsize);
215      if (availablespace > 0)
216        printf (" %10.2f%%", 100*Baccum/availablespace);
217      printf ("\n");
218    }
219  }
220
221  printf ("Number of files with more than %d %s blocks\n", nbuckets, SIZ[blocksize]);
222  j=nbuckets+1
223  printf ("%8d+",j);
224  printf("%9d", diskarray[j]);
225  Faccum += diskarray[j];
226  Baccum = totsize;
227  if (availablespace > 0)
228    printf ("%10.2f%%%10.2f%% %10.2f%%\n", 100*Faccum/(files-migratedfiles), 100*Baccum/totsize, 100*Baccum/availablespace);
229  else
230    printf ("%10.2f%%%10.2f%%\n", 100*Faccum/(files-migratedfiles), 100*Baccum/totsize);
231
232  if (migratedsize > 0)
233  {
234    printf ("\nHistogram of migrated files <= one %s block in size\n",SIZ[blocksize])
235    printf ("Subblocks    Count  File%%ile  Space%%ile");
236    if (availablespace > 0)
237      printf (" AvlSpc%%ile");
238    printf ("\n--------- -------- ---------- ----------");
239    if (availablespace > 0) printf ("  ----------");
240    printf ("\n");
241    msubblarray[0] = 0;
242    for (j=0; j<=32; j++)
243    {
244      if (allhist || msubblarray[j] > 0)
245      {
246        printf ("%9d",j);
247        printf("%9d", msubblarray[j]);
248        mFaccum += msubblarray[j];
249        mBaccum += j*msubblarray[j]*SUB[blocksize];
250        if (availablespace > 0)
251          printf ("%10.2f%%%10.2f%% %10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize, 100*mBaccum/availablespace);
252        else
253          printf ("%10.2f%%%10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize);
254      }
255    }
256
257    printf ("\nHistogram of migrated files with N %s blocks (plus end fragment)\n", SIZ[blocksize]);
258    printf ("   Blocks    Count  File%%ile  Space%%ile");
259    if (availablespace > 0)
260      printf (" AvlSpc%%ile");
261    printf ("\n--------- -------- ---------- ----------");
262    if (availablespace > 0) printf ("  ----------");
263    printf ("\n");
264    for (j=1; j<=nbuckets; j++)
265    {
266      if (mdiskarray[j] > 0)
267      {
268        printf ("%9d",j);
269        printf("%9d", mdiskarray[j]);
270        mFaccum += mdiskarray[j];
271        mBaccum += j*mdiskarray[j]*BKS[blocksize];
272        if (availablespace > 0)
273          printf ("%10.2f%%%10.2f%% %10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize, 100*mBaccum/availablespace);
274        else
275          printf ("%10.2f%%%10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize);
276      }
277    }
278
279    printf ("Number of migrated files with more than %d %s blocks\n", nbuckets, SIZ[blocksize]);
280    j=nbuckets+1
281    printf ("%8d+",j);
282    printf("%9d", mdiskarray[j]);
283    mFaccum += mdiskarray[j];
284    mBaccum = migratedsize;
285    if (availablespace > 0)
286      printf ("%10.2f%%%10.2f%% %10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize, 100*mBaccum/availablespace);
287    else
288      printf ("%10.2f%%%10.2f%%\n", 100*mFaccum/migratedfiles, 100*mBaccum/totsize);
289  }
290
291  #printf ("\nBlockSize        Waste %% Waste Avg Waste per File\n");
292  #printf (  "--------- ------------ ------- ------------------\n");
293  #printf ("     %s %12d %6.2f%% %17d\n",SIZ[blocksize],totwaste,100*totwaste/totsize,totwaste/(files-zerolen-migratedfiles));
294  #printf ("     %s %12d %6.2f%% %17d\n","Real",totalactualwaste,100*totalactualwaste/totsize,totalactualwaste/(files-zerolen-migratedfiles));
295
296}
Note: See TracBrowser for help on using the repository browser.