source: gpfs_3.1_ker2.6.20/lpp/mmfs/bin/mmdelnsd @ 16

Last change on this file since 16 was 16, checked in by rock, 16 years ago
  • Property svn:executable set to *
File size: 23.0 KB
Line 
1#!/bin/ksh
2# IBM_PROLOG_BEGIN_TAG
3# This is an automatically generated prolog.
4# 
5# 
6# 
7# Licensed Materials - Property of IBM
8# 
9# (C) COPYRIGHT International Business Machines Corp. 2000,2006
10# All Rights Reserved
11# 
12# US Government Users Restricted Rights - Use, duplication or
13# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
14# 
15# IBM_PROLOG_END_TAG
16# @(#)09 1.54.1.2 src/avs/fs/mmfs/ts/admin/mmdelnsd.sh, mmfs, avs_rgpfs24, rgpfs24s005a 6/14/06 14:40:18
17################################################################################
18#
19# Usage:
20#   mmdelnsd {"DiskName[;DiskName...]" | -F DiskFile}
21# or
22#   mmdelnsd -p NSDid [-N Node[,Node]]
23#
24# where:
25#
26#   "DiskName[;DiskName...]"  is a ";"-separated list of NSD names.
27#
28#   DiskFile                  is the name of a file containing the names
29#                             of the NSDs to be deleted.
30#
31#   -p NSDid                  is the NSD volume id of a GPFS NSD.
32#
33#   -N Node[,Node]            is a list of nodes to which the disk is attached.
34#                             If not specified, the disk is assumed to be
35#                             directly attached to all nodes in the cluster.
36#                             Although -N is processed the same as for other
37#                             GPFS commands (i.e., you could also specify
38#                             a longer node list, a node file, or a node class),
39#                             only the first two nodes will be used.
40#
41# Note:  The second format of the command is intended primarily for use
42#        after a successful removal of the disk from the mmsdrfs file,
43#        but a failure to clear the NSD volume id of an NSD disk.
44#
45################################################################################
46
47# Include global declarations and service routines
48. /usr/lpp/mmfs/bin/mmglobfuncs
49. /usr/lpp/mmfs/bin/mmsdrfsdef
50. /usr/lpp/mmfs/bin/mmfsfuncs
51
52sourceFile="mmdelnsd.sh"
53[[ -n $DEBUG || -n $DEBUGmmdelnsd ]] && set -x
54$mmTRACE_ENTER "$*"
55
56
57# Local work files.  Names should be of the form:
58#   fn=${tmpDir}fn.${mmcmd}.$$
59affectedNodes=${tmpDir}affectedNodes.${mmcmd}.$$
60PVIDsToDelete=${tmpDir}PVIDsToDelete.${mmcmd}.$$
61
62LOCAL_FILES=" $PVIDsToDelete $affectedNodes "
63
64
65# Local declarations
66usageMsg=413
67
68
69# Local routines
70
71###############################################################################
72#
73# Function:  Delete the NSD volume id of an NSD disk.
74#
75# Input:     pvid nsdSubtype nsdSubname primaryServer backupServer
76#
77###############################################################################
78function clearPVID  # <pvid> <nsdSubtype> <nsdSubname>
79                    #   <primaryServer> <backupServer>
80{
81  typeset sourceFile="mmdelnsd.sh"
82  [[ -n $DEBUG || -n $DEBUGclearPVID ]] && set -x
83  $mmTRACE_ENTER "$*"
84  typeset pvid=$1
85  typeset nsdSubtype=$2
86  typeset nsdSubname=$3
87  typeset primaryServer=$4
88  typeset backupServer=$5
89
90  typeset firstChoice secondChoice tspreparediskOutput magicWord rc rc2 retcode
91
92  # Determine where to send the request for deleting the NSD volume id.
93  if [[ -z $primaryServer ]]
94  then
95    firstChoice=$ourNodeName
96    secondChoice=""
97  elif [[ $primaryServer = $ourNodeName ]]
98  then
99    firstChoice=$ourNodeName
100    secondChoice=$backupServer
101  elif [[ $backupServer = $ourNodeName ]]
102  then
103    firstChoice=$ourNodeName
104    secondChoice=$primaryServer
105  else
106    firstChoice=$primaryServer
107    secondChoice=$backupServer
108  fi
109
110  nsdSubnameParm="-Z $nsdSubname"
111  [[ $nsdSubname = $UNKNOWN ]] && nsdSubnameParm=""
112
113  # Clear (zero out) the NSD volume id.
114  if [[ $firstChoice = $ourNodeName ]]
115  then
116    tspreparediskOutput=$($tspreparedisk -z $pvid -t $nsdSubtype $nsdSubnameParm)
117    rc=$?
118  else
119    tspreparediskOutput=$($mmcommon on1 $firstChoice adminCmd  \
120       tspreparedisk -z $pvid -t $nsdSubtype $nsdSubnameParm)
121    rc=$?
122  fi
123
124  # Parse the output from the tspreparedisk command.
125  IFS=":"
126  set -f ; set -- $tspreparediskOutput ; set +f
127  magicWord=$1
128  rc2=$2
129  IFS="$IFS_sv"
130
131  if [[ $rc != 0 || $magicWord != tspreparedisk || $rc2 -ne 0 ]]
132  then
133    # tspreparedisk failed.  If there is a second choice, try again.
134    # Note that because of the way firstChoice and secondChoice
135    # were determined, secondChoice cannot be the local node.
136    if [[ -n $secondChoice ]]
137    then
138      tspreparediskOutput=$($mmcommon on1 $secondChoice adminCmd  \
139         tspreparedisk -z $pvid -t $nsdSubtype $nsdSubnameParm)
140      rc=$?
141      # Parse the output from the tspreparedisk command.
142      IFS=":"
143      set -f ; set -- $tspreparediskOutput ; set +f
144      magicWord=$1
145      rc2=$2
146      IFS="$IFS_sv"
147    fi
148  fi
149
150  if [[ $rc != 0 || $magicWord != tspreparedisk || $rc2 -ne 0 ]]
151  then
152    retcode=$rc2
153  else
154    retcode=0
155  fi
156
157  return $retcode
158
159}  #----- end of function clearPVID ------------------------
160
161
162
163######################
164# Mainline processing
165######################
166
167
168#################################
169# Process the command arguments.
170#################################
171[[ $arg1 = '-?' || $arg1 = '-h' || $arg1 = '--help' || $arg1 = '--' ]] &&  \
172  syntaxError "help" $usageMsg
173
174[[ $argc -lt 1  ]] &&  \
175  syntaxError "missingArgs" $usageMsg
176
177while getopts :F:N:p: OPT
178do
179  case $OPT in
180
181    F) [[ -n $Fflag ]] && syntaxError "multiple" $noUsageMsg "-$OPT"
182       Farg="$OPTARG"
183       Fflag="-F"
184       ;;
185
186    N) [[ -n $Nflag ]] && syntaxError "multiple" $noUsageMsg "-$OPT"
187       nodeList="$OPTARG"
188       Nflag="-N"
189       ;;
190
191    p) [[ -n $pflag ]] && syntaxError "multiple" $noUsageMsg "-$OPT"
192       pflag="-p"
193       pvidToDelete=$OPTARG
194       ;;
195
196    +[Np]) # Invalid option
197       syntaxError "invalidOption" $usageMsg $OPT
198       ;;
199
200    :) # Missing argument
201       syntaxError "missingValue" $usageMsg $OPTARG
202       ;;
203
204    *) # Invalid option
205       syntaxError "invalidOption" $usageMsg $OPTARG
206       ;;
207  esac
208done
209
210# Drop the processed options from the parameter list.
211shift OPTIND-1
212
213# Complete the parameter checking.
214if [[ -z $pflag && -z $Nflag ]]
215then
216  if [[ -z $Fflag ]]
217  then
218    # The diskList form of the command syntax was used.
219    if [[ $argc -eq 1 ]]
220    then
221      # If there is exactly one string left, it is assumed
222      # to be the list of disks.
223      diskList=$1
224
225      # Ensure that semi-colon is used as a disk name separator.
226      [[ "$diskList" = *+([-:,${BLANKchar}${TABchar}])* ]] &&  \
227        syntaxError "badSeparator_notSemicolon" $noUsageMsg
228
229      # Convert the list of disks into a file.
230      $rm -f $diskNamesFile
231      IFS=';'
232      for disk in $diskList
233      do
234        print -- "$disk" >> $diskNamesFile
235        checkForErrors "writing to $diskNamesFile" $?
236      done
237      IFS="$IFS_sv"    # Restore the default IFS setting.
238
239    elif [[ $argc -gt 1 ]]
240    then
241      # More than one string is left, so we have a syntax error.
242      syntaxError "extraArg" $usageMsg "$2"
243
244    else
245      # If there are no more parameters,
246      # a required parameter is missing.
247      syntaxError "missingArgs" $usageMsg
248    fi  # end of if [[ $argc -eq 1 ]]
249
250  else
251    # The disks names are specified in a file.
252    # Check the file and create a temp copy that we can modify.
253    checkUserFile $Farg $diskNamesFile
254    [[ $? -ne 0 ]] && cleanupAndExit
255  fi  # end of if [[ -z $Fflag ]]
256
257else
258  # The second form of the syntax was used.
259  # The -p flag must have been specified.
260  [[ -z $pflag ]] &&  \
261    syntaxError "missingArgs" $usageMsg
262
263  # There should be no other parms.
264  [[ $# -ne 0 ]] &&   \
265    syntaxError "extraArg" $usageMsg "$1"
266
267  # If a list of nodes was specified via the -N option,
268  # convert it to a verified list of admin node names.
269  if [[ -n $Nflag ]]
270  then
271    createVerifiedNodefile "$nodeList" $REL_HOSTNAME_Field no $nodefile
272    [[ $? -ne 0 ]] && cleanupAndExit
273
274    # Convert the output data from a file to a comma-separated list.
275    newNodeList=$(print -- $(cat $nodefile) | $sed 's/ /,/g')
276  fi  # end of if [[ -n $Nflag ]]
277fi  # end of if [[ -z $pflag && -z $Nflag ]]
278
279
280#####################################################################
281# Set up trap exception handling and call the gpfsInit function.
282# It will ensure that the local copy of the mmsdrfs and the rest of
283# the GPFS system files are up-to-date and will obtain the sdr lock.
284#####################################################################
285trap pretrap HUP INT QUIT KILL
286gpfsInitOutput=$(gpfsInit $lockId)
287setGlobalVar $? $gpfsInitOutput
288
289
290####################################################
291# Determine whether disk-based quorum is in effect.
292####################################################
293diskQuorumInEffect=$(showCfgValue tiebreakerDisks)
294[[ $diskQuorumInEffect = no ]] && diskQuorumInEffect=""
295
296
297#######################################################################
298# Create a new version of the mmsdrfs file.  Increment the generation
299# number and remove the free disk lines for the disks being deleted.
300#
301# Note:  A disk cannot be deleted from the cluster if it is still
302#        listed as an active disk in some file system.
303#######################################################################
304$rm -f $newsdrfs $nodefile $PVIDsToDelete
305IFS=":"         # Change the field separator to ':'.
306exec 3<&-
307exec 3< $mmsdrfsFile
308while read -u3 sdrfsLine
309do
310  # Parse the line.
311  set -f ; set -A v -- - $sdrfsLine ; set +f
312  IFS="$IFS_sv"    # Restore the default IFS settings.
313  printLine=true   # Assume the line will be printed.
314
315  # Change some of the fields depending on the type of line.
316  case ${v[$LINE_TYPE_Field]} in
317
318    $VERSION_LINE )  # This is the global header line.
319      # Increment the generation number
320      newGenNumber=${v[$SDRFS_GENNUM_Field]}+1
321      v[$SDRFS_GENNUM_Field]=$newGenNumber
322      ;;
323
324    $MEMBER_NODE )   # This line describes a node.
325      # Add the node's reliable name to the list of nodes
326      # to be notified about the sdrfs changes.
327      print -- "${v[$REL_HOSTNAME_Field]}" >> $nodefile
328      checkForErrors "writing to file $nodefile" $?
329      ;;
330
331    $SG_DISKS )      # This line describes some disk.
332      # Determine whether this disk is one of the disks to be deleted.
333      if [[ -z $pflag ]]  # Was the -p flag specified?
334      then
335        # We are in the "normal" disk list or disk file cases.
336        # Was this disk one of the NSDs to be deleted?
337        $grep -w ${v[$DISK_NAME_Field]} $diskNamesFile > /dev/null 2>&1
338        if [[ $? -eq 0 ]]
339        then
340          # The disk represented by the current SG_DISKS line
341          # is one of the disks that should be deleted.
342          # Check whether the disk can be removed from the mmsdrfs file.
343          if [[ ${v[$PAXOS_Field]} = $PaxosDisk && -n $diskQuorumInEffect ]]
344          then
345            # The disk is a tiebreaker disk and cannot be deleted.
346            # Issue a message but keep going; do not fail the command.
347            printErrorMsg 130 $mmcmd ${v[$DISK_NAME_Field]}
348            failedDisks=yes
349          elif [[ ${v[$NODESETID_Field]} = $FREE_DISK ]]
350          then
351            # The disk will be deleted; save needed information.
352            printLine=false
353            deletedDisks=yes
354            nsdSubtype=${v[$NSD_SUBTYPE_Field]}
355            [[ $nsdSubtype = "" ]] && nsdSubtype=generic
356            nsdSubName=${v[$NSD_SUBTYPE_DISKNAME_Field]}
357            [[ $nsdSubName = "" ]] && nsdSubName=$UNKNOWN
358            print -- ${v[$DISK_NAME_Field]} ${v[$PVID_Field]}  \
359                     $nsdSubtype $nsdSubName                   \
360                     ${v[$NSD_PRIMARY_NODE_Field]}             \
361                     ${v[$NSD_BACKUP_NODE_Field]} >> $PVIDsToDelete
362            checkForErrors "writing to file $PVIDsToDelete" $?
363          else
364            # The disk still belongs to a file system.
365            # Issue a message but keep going; do not fail the command.
366            printErrorMsg 485 $mmcmd ${v[$DISK_NAME_Field]} ${v[$DEV_NAME_Field]}
367            failedDisks=yes
368          fi   # end of if [[ ${v[$PAXOS_Field]} = $PaxosDisk && ... ]]
369
370          # Remove the disk from the file of disks to be deleted.
371          grep -vw ${v[$DISK_NAME_Field]} $diskNamesFile > $tmpfile
372
373          # Initialize the file for the next iteration.
374          $mv $tmpfile $diskNamesFile
375          checkForErrors "mv $tmpfile $diskNamesFile" $?
376        fi   # end of if [[ $? -eq 0]]
377
378      else  # We come here if the -p option for specifying
379            # an NSD volume id was used.
380
381        if [[ ${v[$PVID_Field]} = $pvidToDelete ]]
382        then    # We come here if the disk represented by the current
383                # SG_DISKS line is the one that must be deleted.
384
385          if [[ ${v[$NODESETID_Field]} = $FREE_DISK ]]
386          then
387
388            # The disk is not in use and can therefore be deleted.
389            # Save the information needed for clearing the NSD volume id.
390            nsdSubtype=${v[$NSD_SUBTYPE_Field]}
391            [[ $nsdSubtype = "" ]] && nsdSubtype=generic
392            nsdSubName=${v[$NSD_SUBTYPE_DISKNAME_Field]}
393            [[ $nsdSubName = "" ]] && nsdSubName=$UNKNOWN
394            if [[ -n $Nflag ]]
395            then
396              # A node list was specified.
397              IFS=','
398              set -f ; set -- $newNodeList ; set +f
399              nodeName1=$1
400              nodeName2=$2
401              IFS="$IFS_sv"
402              print -- ${v[$DISK_NAME_Field]} ${v[$PVID_Field]}  \
403                       $nsdSubtype $nsdSubName                   \
404                       ${v[$NSD_PRIMARY_NODE_Field]}             \
405                       ${v[$NSD_BACKUP_NODE_Field]}              \
406                       $nodeName1 $nodeName2         >> $PVIDsToDelete
407              rc=$?
408            else
409              # A node list was not specified.
410              print -- ${v[$DISK_NAME_Field]} ${v[$PVID_Field]}  \
411                       $nsdSubtype $nsdSubName                   \
412                       ${v[$NSD_PRIMARY_NODE_Field]}             \
413                       ${v[$NSD_BACKUP_NODE_Field]}  >> $PVIDsToDelete
414              rc=$?
415            fi
416            checkForErrors "writing to file $PVIDsToDelete" $rc
417
418            # Remove the disk from the mmsdrfs file.
419            printLine=false
420            deletedDisks=yes
421
422          else
423            # The disk still belongs to a file system.
424            # Issue a message but keep going; do not fail the command.
425            printErrorMsg 485 $mmcmd ${v[$DISK_NAME_Field]} ${v[$DEV_NAME_Field]}
426            failedDisks=yes
427
428          fi   # end of if [[ ${v[$NODESETID_Field]} = $FREE_DISK ]]
429
430        fi   # end of if [[ ${v[$PVID_Field]} = $pvidToDelete ]]
431
432      fi   # end of if [[ -z $pflag ]]
433      ;;
434
435    * )  # There is no need to look at any of the other lines.
436      ;;
437
438  esac  # end Change some of the fields
439
440  # If the line is to be kept, write it to the new mmsdrfs file.
441  if [[ $printLine = true ]]
442  then
443    print_newLine >> $newsdrfs
444    checkForErrors "writing to file $newsdrfs" $?
445  fi
446
447  IFS=":"  # Change the separator back to ":" for the next iteration.
448
449done  # end while read -u3 sdrfsLine
450
451IFS="$IFS_sv"  # Restore the default IFS settings.
452
453
454# If we are in the normal disk list or disk file case, inform the user of any
455# disks for which there were no corresponding SG_DISKS lines in the sdrfs file.
456# If disks were specified but none were found, print an error message and exit.
457if [[ -z $pflag ]]
458then
459  # We are in the "normal" disk list or disk file case.  If there are any
460  # disks to delete that we didn't find in the mmsdrfs file, tell the user.
461  if [[ -s $diskNamesFile ]]
462  then
463    # If the input file was generated by mmcrnsd, it may have comment
464    # lines that will trigger a misleading warning message.  Scan the
465    # file and remove all comment and empty lines.  In preparation for
466    # the message that will be issued shortly, insert a tab character
467    # at the begining of the non-comment lines.
468    $awk '                           \
469      BEGIN { TABchar = " " }  \
470      $1 ~ /^#/ { next }             \
471      NF == 0   { next }             \
472      { print TABchar $0 }           \
473    ' $diskNamesFile > $tmpfile
474
475    # Issue "The following disks are not known to GPFS:" message.
476    [[ -s $tmpfile ]] &&  \
477      printErrorMsg 486 $mmcmd "$($cat $tmpfile)"
478  fi  # end of if [[ -s $diskNamesFile ]]
479
480  # If no disks will be deleted, issue an error and exit.
481  if [[ -z $deletedDisks ]]
482  then
483    # No disks were specified that could be deleted.
484    printErrorMsg 487 $mmcmd
485    cleanupAndExit
486  fi
487fi  # end of if [[ -z $pflag ]]
488
489
490############################################
491# Put the new mmsdrfs file into the sdr.
492# This deletes the disks from the cluster.
493############################################
494
495# If no disks are being deleted from the sdrfs file,
496# there is no need to commit changes.
497# This test is only needed for the -p case, since we exit above
498# if there were no changes in the regular case.
499if [[ -n $deletedDisks ]]
500then
501  trap "" HUP INT QUIT KILL
502  gpfsObjectInfo=$(commitChanges  \
503    $HOME_CLUSTER $nsId $gpfsObjectInfo $newGenNumber $newsdrfs $primaryServer)
504  rc=$?
505  if [[ $rc -ne 0 ]]
506  then
507    # We were unable to replace the file in the sdr.
508    printErrorMsg 381 $mmcmd
509    cleanupAndExit
510  fi
511fi  # end of if [[ -n $deletedDisks ]]
512
513
514##################
515# Unlock the sdr.
516##################
517[[ $sdrLocked = yes ]] &&  \
518  freeLockOnServer $primaryServer $ourNodeNumber > /dev/null
519sdrLocked=no
520trap posttrap HUP INT QUIT KILL
521
522
523########################################################################
524# Handle the case where -p was specified but the NSD volume id was not
525# found in the mmsdrfs file.  In such a case we must still try to clear
526# the NSD volume id.  This is one of the main uses of the -p option.
527########################################################################
528
529# If no match was found in the sdrfs file, we must be in the -p case,
530# since we exited earlier if no match was found in the disk list or
531# disk file case.
532if [[ -z $deletedDisks ]]
533then
534  if [[ -z $failedDisks ]]
535  then
536    # If here, the NSD volume id was not found in the mmsdrfs file.
537    # Store the info needed for deleting the NSDid in the delete file.
538    if [[ -n $Nflag ]]
539    then
540      # A node list was specified.
541      IFS=','
542      set -f ; set -- $newNodeList ; set +f
543      nodeName1=$1
544      nodeName2=$2
545      IFS="$IFS_sv"
546      print -- $UNKNOWN $pvidToDelete generic $UNKNOWN  \
547               $nodeName1 $nodeName2 >> $PVIDsToDelete
548      rc=$?
549    else
550      # A node list was not specified.
551      print -- $UNKNOWN $pvidToDelete generic $UNKNOWN >> $PVIDsToDelete
552      rc=$?
553    fi
554    checkForErrors "writing to file $PVIDsToDelete" $rc
555  else
556    # If here, the NSD volume id was found in the mmsdrfs file, but an
557    # error (probably "disk still belongs to a file system") was found.
558    # Issue a message that none of the disks were deleted, and quit.
559    printErrorMsg 487 $mmcmd
560    cleanupAndExit
561  fi  # end of if [[ -z $failedDisks ]]
562fi  # end of if [[ -z $deletedDisks ]]
563
564
565#############################################################################
566# Clear (zero-out) the NSD volume id on each disk in the PVIDsToDelete file.
567#############################################################################
568
569if [[ -s $PVIDsToDelete ]]
570then
571  # Process the PVIDsToDelete file one line at a time.
572  exec 3<&-
573  exec 3< $PVIDsToDelete
574  while read -u3 diskLine
575  do
576    # Parse the line.
577    set -f ; set -- $diskLine ; set +f
578    diskName=$1
579    pvid=$2
580    nsdSubtype=$3
581    nsdSubname=$4
582    primarySvr=$5
583    backupSvr=$6
584    nodeName1=$7
585    nodeName2=$8
586
587    # Issue an informational progress message (processing disk xyz ...).
588    printInfoMsg 251 $mmcmd $diskName
589
590    # Clear the NSD volume id using one of the first two servers.
591    clearPVID $pvid $nsdSubtype $nsdSubname $primarySvr $backupSvr
592    rc=$?
593    if [[ $rc -ne 0 ]]  # if the clearPVID call failed
594    then
595
596      if [[ -z $nodeName1 ]]  # if there are no other nodes to try
597      then
598        # tspreparedisk failed and we have no other nodes to try.
599        # Tell the guy what to do.
600        if [[ $rc -eq $MM_DeviceNotFound ]]
601        then
602          # The disk with the specified NSD volume id was not found.
603          printErrorMsg 397 $mmcmd $pvid
604        elif [[ -z $primarySvr ]]
605        then
606          # Tell the user to issue "mmdelnsd -p <pvid>"
607          # to delete the disk.
608          if [[ $diskName = $UNKNOWN ]]
609          then
610            printErrorMsg 247 $mmcmd $pvid $pvid
611          else
612            printErrorMsg 488 $mmcmd $diskName $pvid
613          fi
614        else
615          # Tell the user to issue "mmdelnsd -p <pvid> -N <nodeList>"
616          # to delete the disk.
617          [[ -n $backupSvr ]] && primarySvr="${primarySvr},${backupSvr}"
618          if [[ $diskName = $UNKNOWN ]]
619          then
620            printErrorMsg 248 $mmcmd $pvid $pvid $primarySvr
621          else
622            printErrorMsg 489 $mmcmd $diskName $pvid $primarySvr
623          fi
624        fi
625
626      else
627        # Besides the servers found on the SG_DISKS line of the mmsdrfs file,
628        # the user specified other nodes via the -N option on the command.
629        # Try to clear the NSD volume id using these nodes.
630        clearPVID $pvid $nsdSubtype $nsdSubname $nodeName1 $nodeName2
631        rc=$?
632        if [[ $rc -ne 0 ]]
633        then
634          # tspreparedisk failed and we have no other nodes to try.
635          # Tell the guy what to do.
636          # The NSD volume id was not erased from the disk.
637          if [[ $rc -eq $MM_DeviceNotFound ]]
638          then
639            # The disk with the specified NSD volume id was not found.
640            printErrorMsg 397 $mmcmd $pvid
641          elif [[ -z $nodeName1 ]]
642          then
643            # Tell the user to issue "mmdelnsd -p <pvid>"
644            # to delete the disk.
645            if [[ $diskName = $UNKNOWN ]]
646            then
647              printErrorMsg 247 $mmcmd $pvid $pvid
648            else
649              printErrorMsg 488 $mmcmd $diskName $pvid
650            fi
651          else
652            # Tell the user to issue "mmdelnsd -p <pvid> -N <nodeList>"
653            # to delete the disk.
654            [[ -n $nodeName2 ]] && nodeName1="${nodeName1},${nodeName2}"
655            if [[ $diskName = $UNKNOWN ]]
656            then
657              printErrorMsg 248 $mmcmd $pvid $pvid $nodeName1
658            else
659              printErrorMsg 489 $mmcmd $diskName $pvid $nodeName1
660            fi
661          fi    # end of if [[ -z $nodeName1 ]]
662        fi    # end of if [[ $rc -ne 0 ]]
663
664      fi    # end of if [[ -z $nodeName1 ]]
665
666    fi    # end of if [[ $rc -ne 0 ]]
667
668  done  # end of while read -u3 diskLine
669
670fi   # end of if [[ -s $PVIDsToDelete ]]
671
672
673####################################################################
674# Asynchronously propagate the sdrfs file to the rest of the nodes
675# if there were any changes made.
676# Any nodes that are unreachable now will pick up the changes the
677# next time GPFS is started or some other mm command is executed.
678####################################################################
679[[ -n $deletedDisks ]] &&  \
680  propagateSdrfsFile async $nodefile $newsdrfs $newGenNumber rereadnsd
681
682
683###################################################
684# If installed, invoke the syncfsconfig user exit.
685###################################################
686if [[ -x $syncfsconfig && -n $deletedDisks ]]
687then
688   print -- "$mmcmd:  Starting $syncfsconfig ..."
689   $syncfsconfig
690   print -- "$mmcmd:  $syncfsconfig finished."
691fi
692
693cleanupAndExit 0
694
Note: See TracBrowser for help on using the repository browser.