source: drbl_ui/backup/test_busybox/busybox-1.7.2/miscutils/Config.in @ 195

Last change on this file since 195 was 20, checked in by chris, 17 years ago
File size: 10.2 KB
RevLine 
[20]1#
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
4#
5
6menu "Miscellaneous Utilities"
7
8config ADJTIMEX
9  bool "adjtimex"
10  default n
11  help
12    Adjtimex reads and optionally sets adjustment parameters for
13    the Linux clock adjustment algorithm.
14
15config BBCONFIG
16  bool "bbconfig"
17  default n
18  help
19    The bbconfig applet will print the config file with which
20    busybox was built.
21
22config CHRT
23  bool "chrt"
24  default n
25  help
26    manipulate real-time attributes of a process.
27    This requires sched_{g,s}etparam support in your libc.
28
29config CROND
30  bool "crond"
31  default n
32  select FEATURE_SUID
33  select FEATURE_SYSLOG
34  help
35    Crond is a background daemon that parses individual crontab
36    files and executes commands on behalf of the users in question.
37    This is a port of dcron from slackware.  It uses files of the
38    format /var/spool/cron/crontabs/<username> files, for example:
39        $ cat /var/spool/cron/crontabs/root
40        # Run daily cron jobs at 4:40 every day:
41        40 4 * * * /etc/cron/daily > /dev/null 2>&1
42    Note that Busybox binary must be setuid root for this applet to
43    work properly.
44
45config DEBUG_CROND_OPTION
46  bool "Support debug option -d"
47  depends on CROND
48  default n
49  help
50    Support option -d to enter debug mode.
51
52config FEATURE_CROND_CALL_SENDMAIL
53  bool "Using /usr/sbin/sendmail?"
54  default n
55  depends on CROND
56  help
57    Support calling /usr/sbin/sendmail for send cmd outputs.
58
59config CRONTAB
60  bool "crontab"
61  default n
62  select FEATURE_SUID
63  help
64    Crontab manipulates the crontab for a particular user.  Only
65    the superuser may specify a different user and/or crontab directory.
66
67config DC
68  bool "dc"
69  default n
70  help
71    Dc is a reverse-polish desk calculator which supports unlimited
72    precision arithmetic.
73
74config DEVFSD
75  bool "devfsd (obsolete)"
76  default n
77  select FEATURE_SYSLOG
78  help
79    This is deprecated, and will be removed at the end of 2008.
80
81    Provides compatibility with old device names on a devfs systems.
82    You should set it to true if you have devfs enabled.
83    The following keywords in devsfd.conf are supported:
84    "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
85    "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
86    "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
87
88     But only if they are written UPPERCASE!!!!!!!!
89
90config DEVFSD_MODLOAD
91  bool "Adds support for MODLOAD keyword in devsfd.conf"
92  default n
93  depends on DEVFSD
94  help
95    This actually doesn't work with busybox modutils but needs
96    the external modutils.
97
98config DEVFSD_FG_NP
99  bool "Enables the -fg and -np options"
100  default n
101  depends on DEVFSD
102  help
103    -fg Run the daemon in the foreground.
104    -np Exit  after  parsing  the configuration file. Do not poll for events.
105
106config DEVFSD_VERBOSE
107  bool "Increases logging (and size)"
108  default n
109  depends on DEVFSD
110  help
111    Increases logging to stderr or syslog.
112
113config FEATURE_DEVFS
114  bool "  Use devfs names for all devices (obsolete)"
115  default n
116  help
117    This is obsolete and will be going away at the end of 2008..
118
119    This tells busybox to look for names like /dev/loop/0 instead of
120    /dev/loop0.  If your /dev directory has normal names instead of
121    devfs names, you don't want this.
122
123config EJECT
124  bool "eject"
125  default n
126  help
127    Used to eject cdroms.  (defaults to /dev/cdrom)
128
129config LAST
130  bool "last"
131  default n
132  select FEATURE_WTMP
133  help
134    'last' displays a list of the last users that logged into the system.
135
136config LESS
137  bool "less"
138  default n
139  help
140    'less' is a pager, meaning that it displays text files. It possesses
141    a wide array of features, and is an improvement over 'more'.
142
143config FEATURE_LESS_MAXLINES
144  int "Max number of input lines less will try to eat"
145  default 9999999
146  depends on LESS
147
148config FEATURE_LESS_BRACKETS
149  bool "Enable bracket searching"
150  default y
151  depends on LESS
152  help
153    This option adds the capability to search for matching left and right
154    brackets, facilitating programming.
155
156config FEATURE_LESS_FLAGS
157  bool "Enable extra flags"
158  default y
159  depends on LESS
160  help
161    The extra flags provided do the following:
162
163    The -M flag enables a more sophisticated status line.
164    The -m flag enables a simpler status line with a percentage.
165
166config FEATURE_LESS_FLAGCS
167  bool "Enable flag changes"
168  default n
169  depends on LESS
170  help
171    This enables the ability to change command-line flags within
172    less itself.
173
174config FEATURE_LESS_MARKS
175  bool "Enable marks"
176  default n
177  depends on LESS
178  help
179    Marks enable positions in a file to be stored for easy reference.
180
181config FEATURE_LESS_REGEXP
182  bool "Enable regular expressions"
183  default n
184  depends on LESS
185  help
186    Enable regular expressions, allowing complex file searches.
187
188config HDPARM
189  bool "hdparm"
190  default n
191  help
192    Get/Set hard drive parameters.  Primarily intended for ATA
193    drives.  Adds about 13k (or around 30k if you enable the
194    FEATURE_HDPARM_GET_IDENTITY option)....
195
196config FEATURE_HDPARM_GET_IDENTITY
197  bool "Support obtaining detailed information directly from drives"
198  default y
199  depends on HDPARM
200  help
201    Enables the -I and -i options to obtain detailed information
202    directly from drives about their capabilities and supported ATA
203    feature set. If no device name is specified, hdparm will read
204    identify data from stdin. Enabling this option will add about 16k...
205
206config FEATURE_HDPARM_HDIO_SCAN_HWIF
207  bool "Register an IDE interface (DANGEROUS)"
208  default n
209  depends on HDPARM
210  help
211    Enables the 'hdparm -R' option to register an IDE interface.
212    This is dangerous stuff, so you should probably say N.
213
214config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
215  bool "Un-register an IDE interface (DANGEROUS)"
216  default n
217  depends on HDPARM
218  help
219    Enables the 'hdparm -U' option to un-register an IDE interface.
220    This is dangerous stuff, so you should probably say N.
221
222config FEATURE_HDPARM_HDIO_DRIVE_RESET
223  bool "perform device reset (DANGEROUS)"
224  default n
225  depends on HDPARM
226  help
227    Enables the 'hdparm -w' option to perform a device reset.
228    This is dangerous stuff, so you should probably say N.
229
230config FEATURE_HDPARM_HDIO_TRISTATE_HWIF
231  bool "tristate device for hotswap (DANGEROUS)"
232  default n
233  depends on HDPARM
234  help
235    Enables the 'hdparm -x' option to tristate device for hotswap,
236    and the '-b' option to get/set bus state.  This is dangerous
237    stuff, so you should probably say N.
238
239config FEATURE_HDPARM_HDIO_GETSET_DMA
240  bool "get/set using_dma flag (DANGEROUS)"
241  default n
242  depends on HDPARM
243  help
244    Enables the 'hdparm -d' option to get/set using_dma flag.
245    This is dangerous stuff, so you should probably say N.
246
247config MAKEDEVS
248  bool "makedevs"
249  default n
250  help
251    'makedevs' is a utility used to create a batch of devices with
252    one command.
253    .
254    There are two choices for command line behaviour, the interface
255    as used by LEAF/Linux Router Project, or a device table file.
256    .
257    'leaf' is traditionally what busybox follows, it allows multiple
258    devices of a particluar type to be created per command.
259    e.g. /dev/hda[0-9]
260    Device properties are passed as command line arguments.
261    .
262    'table' reads device properties from a file or stdin, allowing
263    a batch of unrelated devices to be made with one command.
264    User/group names are allowed as an alternative to uid/gid.
265
266choice
267  prompt "Choose makedevs behaviour"
268  depends on MAKEDEVS
269  default FEATURE_MAKEDEVS_TABLE
270
271config FEATURE_MAKEDEVS_LEAF
272  bool "leaf"
273
274config FEATURE_MAKEDEVS_TABLE
275  bool "table"
276
277endchoice
278
279config MOUNTPOINT
280  bool "mountpoint"
281  default n
282  help
283    mountpoint checks if the directory is a mountpoint.
284
285config MT
286  bool "mt"
287  default n
288  help
289    mt is used to control tape devices.  You can use the mt utility
290    to advance or rewind a tape past a specified number of archive
291    files on the tape.
292
293config RAIDAUTORUN
294  bool "raidautorun"
295  default n
296  help
297    raidautorun tells the kernel md driver to
298    search and start RAID arrays.
299
300config READAHEAD
301  bool "readahead"
302  default n
303  depends on LFS
304  help
305    Preload the files listed on the command line into RAM cache so that
306    subsequent reads on these files will not block on disk I/O.
307
308    This applet just calls the readahead(2) system call on each file.
309    It is mainly useful in system startup scripts to preload files
310    or executables before they are used.  When used at the right time
311    (in particular when a CPU boundprocess is running) it can
312    significantly speed up system startup.
313
314    As readahead(2) blocks until each file has been read, it is best to
315    run this applet as a background job.
316
317config RUNLEVEL
318  bool "runlevel"
319  default n
320  help
321    find the current and previous system runlevel.
322
323    This applet uses utmp but does not rely on busybox supporing
324    utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
325
326config RX
327  bool "rx"
328  default n
329  help
330    Receive files using the Xmodem protocol.
331
332config STRINGS
333  bool "strings"
334  default n
335  help
336    strings prints the printable character sequences for each file
337    specified.
338
339config SETSID
340  bool "setsid"
341  default n
342  help
343    setsid runs a program in a new session
344
345config TASKSET
346  bool "taskset"
347  default n
348  help
349    Retrieve or set a processes's CPU affinity.
350    This requires sched_{g,s}etaffinity support in your libc.
351
352config FEATURE_TASKSET_FANCY
353  bool "fancy output"
354  default y
355  depends on TASKSET
356  help
357    Add code for fancy output. This merely silences a compiler-warning
358    and adds about 135 Bytes. May be needed for machines with alot
359    of CPUs.
360
361config TIME
362  bool "time"
363  default n
364  help
365    The time command runs the specified program with the given arguments.
366    When the command finishes, time writes a message to standard output
367    giving timing statistics about this program run.
368
369config TTYSIZE
370  bool "ttysize"
371  default n
372  help
373    A replacement for "stty size". Unlike stty, can report only width,
374    only height, or both, in any order. It also does not complain on error,
375    but returns default 80x24. Usage in shell scripts: width=`ttysize w`.
376
377config WATCHDOG
378  bool "watchdog"
379  default n
380  help
381    The watchdog utility is used with hardware or software watchdog
382    device drivers.  It opens the specified watchdog device special file
383    and periodically writes a magic character to the device.  If the
384    watchdog applet ever fails to write the magic character within a
385    certain amount of time, the watchdog device assumes the system has
386    hung, and will cause the hardware to reboot.
387
388endmenu
389
Note: See TracBrowser for help on using the repository browser.