source: drbl_ui/backup/test_busybox/busybox-1.7.2/examples/udhcp/udhcpd.conf @ 192

# Sample udhcpd configuration file (/etc/udhcpd.conf)

# The start and end of the IP lease block

start     192.168.0.20  #default: 192.168.0.20
end   192.168.0.254 #default: 192.168.0.254


# The interface that udhcpd will use

interface eth0    #default: eth0


# The maximim number of leases (includes addressesd reserved
# by OFFER's, DECLINE's, and ARP conficts

#max_leases 254   #default: 254


# If remaining is true (default), udhcpd will store the time
# remaining for each lease in the udhcpd leases file. This is
# for embedded systems that cannot keep time between reboots.
# If you set remaining to no, the absolute time that the lease
# expires at will be stored in the dhcpd.leases file.

#remaining  yes   #default: yes


# The time period at which udhcpd will write out a dhcpd.leases
# file. If this is 0, udhcpd will never automatically write a
# lease file. (specified in seconds)

#auto_time  7200    #default: 7200 (2 hours)


# The amount of time that an IP will be reserved (leased) for if a
# DHCP decline message is received (seconds).

#decline_time 3600    #default: 3600 (1 hour)


# The amount of time that an IP will be reserved (leased) for if an
# ARP conflct occurs. (seconds

#conflict_time  3600    #default: 3600 (1 hour)


# How long an offered address is reserved (leased) in seconds

#offer_time 60    #default: 60 (1 minute)

# If a lease to be given is below this value, the full lease time is
# instead used (seconds).

#min_lease  60    #defult: 60


# The location of the leases file

#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases

# The location of the pid file
#pidfile  /var/run/udhcpd.pid #default: /var/run/udhcpd.pid

# Everytime udhcpd writes a leases file, the below script will be called.
# Useful for writing the lease file to flash every few hours.

#notify_file        #default: (no script)

#notify_file  dumpleases  # <--- useful for debugging

# The following are bootp specific options, setable by udhcpd.

#siaddr   192.168.0.22    #default: 0.0.0.0

#sname    zorak     #default: (none)

#boot_file  /var/nfs_root   #default: (none)

# The remainer of options are DHCP options and can be specifed with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.

#Examles
opt dns 192.168.10.2 192.168.10.10
option  subnet  255.255.255.0
opt router  192.168.10.2
opt wins  192.168.10.10
option  dns 129.219.13.81 # appened to above DNS servers for a total of 3
option  domain  local
option  lease 864000    # 10 days of seconds


# Currently supported options, for more info, see options.c
#opt subnet
#opt timezone
#opt router
#opt timesvr
#opt namesvr
#opt dns
#opt logsvr
#opt cookiesvr
#opt lprsvr
#opt bootsize
#opt domain
#opt swapsvr
#opt rootpath
#opt ipttl
#opt mtu
#opt broadcast
#opt wins
#opt lease
#opt ntpsrv
#opt tftp
#opt bootfile


# Static leases map
#static_lease 00:60:08:11:CE:4E 192.168.0.54
#static_lease 00:60:08:11:CE:3E 192.168.0.44