Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

ltmain.sh @ 10

Last change on this file since 10 was 10, checked in by zsjheng, 16 years ago

File size: 195.8 KB

Line
1	# ltmain.sh - Provide generalized library-building support services.
2	# NOTE: Changing this file will not affect anything until you rerun configure.
3	#
4	# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
5	# Free Software Foundation, Inc.
6	# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
7	#
8	# This program is free software; you can redistribute it and/or modify
9	# it under the terms of the GNU General Public License as published by
10	# the Free Software Foundation; either version 2 of the License, or
11	# (at your option) any later version.
12	#
13	# This program is distributed in the hope that it will be useful, but
14	# WITHOUT ANY WARRANTY; without even the implied warranty of
15	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16	# General Public License for more details.
17	#
18	# You should have received a copy of the GNU General Public License
19	# along with this program; if not, write to the Free Software
20	# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
21	#
22	# As a special exception to the GNU General Public License, if you
23	# distribute this file as part of a program that contains a
24	# configuration script generated by Autoconf, you may include it under
25	# the same distribution terms that you use for the rest of that program.
26
27	basename="s,^.*/,,g"
28
29	# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
30	# is ksh but when the shell is invoked as "sh" and the current value of
31	# the _XPG environment variable is not equal to 1 (one), the special
32	# positional parameter $0, within a function call, is the name of the
33	# function.
34	progpath="$0"
35
36	# define SED for historic ltconfig's generated by Libtool 1.3
37	test -z "$SED" && SED=sed
38
39	# The name of this program:
40	progname=`echo "$progpath" \| $SED $basename`
41	modename="$progname"
42
43	# Global variables:
44	EXIT_SUCCESS=0
45	EXIT_FAILURE=1
46
47	PROGRAM=ltmain.sh
48	PACKAGE=libtool
49	VERSION=1.5.22
50	TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
51
52	# See if we are running on zsh, and set the options which allow our
53	# commands through without removal of \ escapes.
54	if test -n "${ZSH_VERSION+set}" ; then
55	setopt NO_GLOB_SUBST
56	fi
57	# Same for EGREP, and just to be sure, do LTCC as well
58	if test "X$EGREP" = X ; then
59	EGREP=egrep
60	fi
61	if test "X$LTCC" = X ; then
62	LTCC=${CC-gcc}
63	fi
64
65	# Check that we have a working $echo.
66	if test "X$1" = X--no-reexec; then
67	# Discard the --no-reexec flag, and continue.
68	shift
69	elif test "X$1" = X--fallback-echo; then
70	# Avoid inline document here, it may be left over
71	:
72	elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
73	# Yippee, $echo works!
74	:
75	else
76	# Restart under the correct shell, and then maybe $echo will work.
77	exec $SHELL "$progpath" --no-reexec ${1+"$@"}
78	fi
79
80	if test "X$1" = X--fallback-echo; then
81	# used as fallback echo
82	shift
83	cat <<EOF
84	$*
85	EOF
86	exit $EXIT_SUCCESS
87	fi
88
89	default_mode=
90	help="Try \`$progname --help' for more information."
91	magic="%%%MAGIC variable%%%"
92	mkdir="mkdir"
93	mv="mv -f"
94	rm="rm -f"
95
96	# Sed substitution that helps us do robust quoting. It backslashifies
97	# metacharacters that are still active within double-quoted strings.
98	Xsed="${SED}"' -e 1s/^X//'
99	sed_quote_subst='s/$[\\`\\"$\\\\]$/\\\1/g'
100	# test EBCDIC or ASCII
101	case `echo X\|tr X '\101'` in
102	A) # ASCII based system
103	# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
104	SP2NL='tr \040 \012'
105	NL2SP='tr \015\012 \040\040'
106	;;
107	*) # EBCDIC based system
108	SP2NL='tr \100 \n'
109	NL2SP='tr \r\n \100\100'
110	;;
111	esac
112
113	# NLS nuisances.
114	# Only set LANG and LC_ALL to C if already set.
115	# These must not be set unconditionally because not all systems understand
116	# e.g. LANG=C (notably SCO).
117	# We save the old values to restore during execute mode.
118	if test "${LC_ALL+set}" = set; then
119	save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
120	fi
121	if test "${LANG+set}" = set; then
122	save_LANG="$LANG"; LANG=C; export LANG
123	fi
124
125	# Make sure IFS has a sensible default
126	lt_nl='
127	'
128	IFS=" $lt_nl"
129
130	if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
131	$echo "$modename: not configured to build any kind of library" 1>&2
132	$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
133	exit $EXIT_FAILURE
134	fi
135
136	# Global variables.
137	mode=$default_mode
138	nonopt=
139	prev=
140	prevopt=
141	run=
142	show="$echo"
143	show_help=
144	execute_dlfiles=
145	duplicate_deps=no
146	preserve_args=
147	lo2o="s/\\.lo\$/.${objext}/"
148	o2lo="s/\\.${objext}\$/.lo/"
149
150	if test -z "$max_cmd_len"; then
151	i=0
152	testring="ABCD"
153	new_result=
154
155	# If test is not a shell built-in, we'll probably end up computing a
156	# maximum length that is only half of the actual maximum length, but
157	# we can't tell.
158	while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
159	= "XX$testring") >/dev/null 2>&1 &&
160	new_result=`expr "X$testring" : ".*" 2>&1` &&
161	max_cmd_len="$new_result" &&
162	test "$i" != 17 # 1/2 MB should be enough
163	do
164	i=`expr $i + 1`
165	testring="$testring$testring"
166	done
167	testring=
168	# Add a significant safety factor because C++ compilers can tack on massive
169	# amounts of additional arguments before passing them to the linker.
170	# It appears as though 1/2 is a usable value.
171	max_cmd_len=`expr $max_cmd_len \/ 2`
172	fi
173
174	#####################################
175	# Shell function definitions:
176	# This seems to be the best place for them
177
178	# func_mktempdir [string]
179	# Make a temporary directory that won't clash with other running
180	# libtool processes, and avoids race conditions if possible. If
181	# given, STRING is the basename for that directory.
182	func_mktempdir ()
183	{
184	my_template="${TMPDIR-/tmp}/${1-$progname}"
185
186	if test "$run" = ":"; then
187	# Return a directory name, but don't create it in dry-run mode
188	my_tmpdir="${my_template}-$$"
189	else
190
191	# If mktemp works, use that first and foremost
192	my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
193
194	if test ! -d "$my_tmpdir"; then
195	# Failing that, at least try and use $RANDOM to avoid a race
196	my_tmpdir="${my_template}-${RANDOM-0}$$"
197
198	save_mktempdir_umask=`umask`
199	umask 0077
200	$mkdir "$my_tmpdir"
201	umask $save_mktempdir_umask
202	fi
203
204	# If we're not in dry-run mode, bomb out on failure
205	test -d "$my_tmpdir" \|\| {
206	$echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
207	exit $EXIT_FAILURE
208	}
209	fi
210
211	$echo "X$my_tmpdir" \| $Xsed
212	}
213
214
215	# func_win32_libid arg
216	# return the library type of file 'arg'
217	#
218	# Need a lot of goo to handle both DLLs and import libs
219	# Has to be a shell function in order to 'eat' the argument
220	# that is supplied when $file_magic_command is called.
221	func_win32_libid ()
222	{
223	win32_libid_type="unknown"
224	win32_fileres=`file -L $1 2>/dev/null`
225	case $win32_fileres in
226	ar\ archive\ import\ library) # definitely import
227	win32_libid_type="x86 archive import"
228	;;
229	ar\ archive) # could be an import, or static
230	if eval $OBJDUMP -f $1 \| $SED -e '10q' 2>/dev/null \| \
231	$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
232	win32_nmres=`eval $NM -f posix -A $1 \| \
233	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
234	case $win32_nmres in
235	import*) win32_libid_type="x86 archive import";;
236	*) win32_libid_type="x86 archive static";;
237	esac
238	fi
239	;;
240	DLL)
241	win32_libid_type="x86 DLL"
242	;;
243	executable) # but shell scripts are "executable" too...
244	case $win32_fileres in
245	MS\ Windows\ PE\ Intel)
246	win32_libid_type="x86 DLL"
247	;;
248	esac
249	;;
250	esac
251	$echo $win32_libid_type
252	}
253
254
255	# func_infer_tag arg
256	# Infer tagged configuration to use if any are available and
257	# if one wasn't chosen via the "--tag" command line option.
258	# Only attempt this if the compiler in the base compile
259	# command doesn't match the default compiler.
260	# arg is usually of the form 'gcc ...'
261	func_infer_tag ()
262	{
263	if test -n "$available_tags" && test -z "$tagname"; then
264	CC_quoted=
265	for arg in $CC; do
266	case $arg in
267	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
268	arg="\"$arg\""
269	;;
270	esac
271	CC_quoted="$CC_quoted $arg"
272	done
273	case $@ in
274	# Blanks in the command may have been stripped by the calling shell,
275	# but not from the CC environment variable when configure was run.
276	" $CC "* \| "$CC "* \| " `$echo $CC` "* \| "`$echo $CC` "* \| " $CC_quoted"* \| "$CC_quoted "* \| " `$echo $CC_quoted` "* \| "`$echo $CC_quoted` "*) ;;
277	# Blanks at the start of $base_compile will cause this to fail
278	# if we don't check for them as well.
279	*)
280	for z in $available_tags; do
281	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
282	# Evaluate the configuration.
283	eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
284	CC_quoted=
285	for arg in $CC; do
286	# Double-quote args containing other shell metacharacters.
287	case $arg in
288	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
289	arg="\"$arg\""
290	;;
291	esac
292	CC_quoted="$CC_quoted $arg"
293	done
294	# user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
295	trimedcc=`echo ${CC} \| $SED -e "s/${host}-//g"`
296	# and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
297	extendcc=${host}-${CC}
298	# and sometimes libtool has CC=<OLDHOST>-gcc but user has CC=<NEWHOST>-gcc
299	# (Gentoo-specific hack because we always export $CHOST)
300	mungedcc=${CHOST-${host}}-${trimedcc}
301	case "$@ " in
302	"cc "* \| " cc "* \| "${host}-cc "* \| " ${host}-cc "*\|\
303	"gcc "* \| " gcc "* \| "${host}-gcc "* \| " ${host}-gcc "*)
304	tagname=CC
305	break ;;
306	"$trimedcc "* \| " $trimedcc "* \| "`$echo $trimedcc` "* \| " `$echo $trimedcc` "*\|\
307	"$extendcc "* \| " $extendcc "* \| "`$echo $extendcc` "* \| " `$echo $extendcc` "*\|\
308	"$mungedcc "* \| " $mungedcc "* \| "`$echo $mungedcc` "* \| " `$echo $mungedcc` "*\|\
309	" $CC "* \| "$CC "* \| " `$echo $CC` "* \| "`$echo $CC` "* \| " $CC_quoted"* \| "$CC_quoted "* \| " `$echo $CC_quoted` "* \| "`$echo $CC_quoted` "*)
310	# The compiler in the base compile command matches
311	# the one in the tagged configuration.
312	# Assume this is the tagged configuration we want.
313	tagname=$z
314	break
315	;;
316	esac
317	fi
318	done
319	# If $tagname still isn't set, then no tagged configuration
320	# was found and let the user know that the "--tag" command
321	# line option must be used.
322	if test -z "$tagname"; then
323	$echo "$modename: unable to infer tagged configuration"
324	$echo "$modename: specify a tag with \`--tag'" 1>&2
325	exit $EXIT_FAILURE
326	# else
327	# $echo "$modename: using $tagname tagged configuration"
328	fi
329	;;
330	esac
331	fi
332	}
333
334
335	# func_extract_an_archive dir oldlib
336	func_extract_an_archive ()
337	{
338	f_ex_an_ar_dir="$1"; shift
339	f_ex_an_ar_oldlib="$1"
340
341	$show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
342	$run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" \|\| exit $?
343	if ($AR t "$f_ex_an_ar_oldlib" \| sort \| sort -uc >/dev/null 2>&1); then
344	:
345	else
346	$echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
347	exit $EXIT_FAILURE
348	fi
349	}
350
351	# func_extract_archives gentop oldlib ...
352	func_extract_archives ()
353	{
354	my_gentop="$1"; shift
355	my_oldlibs=${1+"$@"}
356	my_oldobjs=""
357	my_xlib=""
358	my_xabs=""
359	my_xdir=""
360	my_status=""
361
362	$show "${rm}r $my_gentop"
363	$run ${rm}r "$my_gentop"
364	$show "$mkdir $my_gentop"
365	$run $mkdir "$my_gentop"
366	my_status=$?
367	if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
368	exit $my_status
369	fi
370
371	for my_xlib in $my_oldlibs; do
372	# Extract the objects.
373	case $my_xlib in
374	[\\/]* \| [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
375	*) my_xabs=`pwd`"/$my_xlib" ;;
376	esac
377	my_xlib=`$echo "X$my_xlib" \| $Xsed -e 's%^.*/%%'`
378	my_xdir="$my_gentop/$my_xlib"
379
380	$show "${rm}r $my_xdir"
381	$run ${rm}r "$my_xdir"
382	$show "$mkdir $my_xdir"
383	$run $mkdir "$my_xdir"
384	exit_status=$?
385	if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
386	exit $exit_status
387	fi
388	case $host in
389	-darwin)
390	$show "Extracting $my_xabs"
391	# Do not bother doing anything if just a dry run
392	if test -z "$run"; then
393	darwin_orig_dir=`pwd`
394	cd $my_xdir \|\| exit $?
395	darwin_archive=$my_xabs
396	darwin_curdir=`pwd`
397	darwin_base_archive=`$echo "X$darwin_archive" \| $Xsed -e 's%^.*/%%'`
398	darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null \| $EGREP Architectures 2>/dev/null`
399	if test -n "$darwin_arches"; then
400	darwin_arches=`echo "$darwin_arches" \| $SED -e 's/.*are://'`
401	darwin_arch=
402	$show "$darwin_base_archive has multiple architectures $darwin_arches"
403	for darwin_arch in $darwin_arches ; do
404	mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
405	lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
406	cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
407	func_extract_an_archive "`pwd`" "${darwin_base_archive}"
408	cd "$darwin_curdir"
409	$rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
410	done # $darwin_arches
411	## Okay now we have a bunch of thin objects, gotta fatten them up :)
412	darwin_filelist=`find unfat-$$ -type f -name \.o -print -o -name \.lo -print\| xargs basename \| sort -u \| $NL2SP`
413	darwin_file=
414	darwin_files=
415	for darwin_file in $darwin_filelist; do
416	darwin_files=`find unfat-$$ -name $darwin_file -print \| $NL2SP`
417	lipo -create -output "$darwin_file" $darwin_files
418	done # $darwin_filelist
419	${rm}r unfat-$$
420	cd "$darwin_orig_dir"
421	else
422	cd "$darwin_orig_dir"
423	func_extract_an_archive "$my_xdir" "$my_xabs"
424	fi # $darwin_arches
425	fi # $run
426	;;
427	*)
428	func_extract_an_archive "$my_xdir" "$my_xabs"
429	;;
430	esac
431	my_oldobjs="$my_oldobjs "`find $my_xdir -name \.$objext -print -o -name \.lo -print \| $NL2SP`
432	done
433	func_extract_archives_result="$my_oldobjs"
434	}
435	# End of Shell function definitions
436	#####################################
437
438	# Darwin sucks
439	eval std_shrext=\"$shrext_cmds\"
440
441	disable_libs=no
442
443	# Parse our command line options once, thoroughly.
444	while test "$#" -gt 0
445	do
446	arg="$1"
447	shift
448
449	case $arg in
450	-=) optarg=`$echo "X$arg" \| $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
451	*) optarg= ;;
452	esac
453
454	# If the previous option needs an argument, assign it.
455	if test -n "$prev"; then
456	case $prev in
457	execute_dlfiles)
458	execute_dlfiles="$execute_dlfiles $arg"
459	;;
460	tag)
461	tagname="$arg"
462	preserve_args="${preserve_args}=$arg"
463
464	# Check whether tagname contains only valid characters
465	case $tagname in
466	[!-_A-Za-z0-9,/])
467	$echo "$progname: invalid tag name: $tagname" 1>&2
468	exit $EXIT_FAILURE
469	;;
470	esac
471
472	case $tagname in
473	CC)
474	# Don't test for the "default" C tag, as we know, it's there, but
475	# not specially marked.
476	;;
477	*)
478	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
479	taglist="$taglist $tagname"
480	# Evaluate the configuration.
481	eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
482	else
483	$echo "$progname: ignoring unknown tag $tagname" 1>&2
484	fi
485	;;
486	esac
487	;;
488	*)
489	eval "$prev=\$arg"
490	;;
491	esac
492
493	prev=
494	prevopt=
495	continue
496	fi
497
498	# Have we seen a non-optional argument yet?
499	case $arg in
500	--help)
501	show_help=yes
502	;;
503
504	--version)
505	$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
506	$echo
507	$echo "Copyright (C) 2005 Free Software Foundation, Inc."
508	$echo "This is free software; see the source for copying conditions. There is NO"
509	$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
510	exit $?
511	;;
512
513	--config)
514	${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
515	# Now print the configurations for the tags.
516	for tagname in $taglist; do
517	${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
518	done
519	exit $?
520	;;
521
522	--debug)
523	$echo "$progname: enabling shell trace mode"
524	set -x
525	preserve_args="$preserve_args $arg"
526	;;
527
528	--dry-run \| -n)
529	run=:
530	;;
531
532	--features)
533	$echo "host: $host"
534	if test "$build_libtool_libs" = yes; then
535	$echo "enable shared libraries"
536	else
537	$echo "disable shared libraries"
538	fi
539	if test "$build_old_libs" = yes; then
540	$echo "enable static libraries"
541	else
542	$echo "disable static libraries"
543	fi
544	exit $?
545	;;
546
547	--finish) mode="finish" ;;
548
549	--mode) prevopt="--mode" prev=mode ;;
550	--mode=*) mode="$optarg" ;;
551
552	--preserve-dup-deps) duplicate_deps="yes" ;;
553
554	--quiet \| --silent)
555	show=:
556	preserve_args="$preserve_args $arg"
557	;;
558
559	--tag)
560	prevopt="--tag"
561	prev=tag
562	preserve_args="$preserve_args --tag"
563	;;
564	--tag=*)
565	set tag "$optarg" ${1+"$@"}
566	shift
567	prev=tag
568	preserve_args="$preserve_args --tag"
569	;;
570
571	-dlopen)
572	prevopt="-dlopen"
573	prev=execute_dlfiles
574	;;
575
576	-*)
577	$echo "$modename: unrecognized option \`$arg'" 1>&2
578	$echo "$help" 1>&2
579	exit $EXIT_FAILURE
580	;;
581
582	*)
583	nonopt="$arg"
584	break
585	;;
586	esac
587	done
588
589	if test -n "$prevopt"; then
590	$echo "$modename: option \`$prevopt' requires an argument" 1>&2
591	$echo "$help" 1>&2
592	exit $EXIT_FAILURE
593	fi
594
595	case $disable_libs in
596	no)
597	;;
598	shared)
599	build_libtool_libs=no
600	build_old_libs=yes
601	;;
602	static)
603	build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
604	;;
605	esac
606
607	# If this variable is set in any of the actions, the command in it
608	# will be execed at the end. This prevents here-documents from being
609	# left over by shells.
610	exec_cmd=
611
612	if test -z "$show_help"; then
613
614	# Infer the operation mode.
615	if test -z "$mode"; then
616	$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
617	$echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
618	case $nonopt in
619	cc \| cc \| ++ \| gcc \| -gcc \| g++* \| xlc*)
620	mode=link
621	for arg
622	do
623	case $arg in
624	-c)
625	mode=compile
626	break
627	;;
628	esac
629	done
630	;;
631	db \| dbx \| strace \| truss)
632	mode=execute
633	;;
634	install\|cp\|mv)
635	mode=install
636	;;
637	*rm)
638	mode=uninstall
639	;;
640	*)
641	# If we have no mode, but dlfiles were specified, then do execute mode.
642	test -n "$execute_dlfiles" && mode=execute
643
644	# Just use the default operation mode.
645	if test -z "$mode"; then
646	if test -n "$nonopt"; then
647	$echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
648	else
649	$echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
650	fi
651	fi
652	;;
653	esac
654	fi
655
656	# Only execute mode is allowed to have -dlopen flags.
657	if test -n "$execute_dlfiles" && test "$mode" != execute; then
658	$echo "$modename: unrecognized option \`-dlopen'" 1>&2
659	$echo "$help" 1>&2
660	exit $EXIT_FAILURE
661	fi
662
663	# Change the help message to a mode-specific one.
664	generic_help="$help"
665	help="Try \`$modename --help --mode=$mode' for more information."
666
667	# These modes are in order of execution frequency so that they run quickly.
668	case $mode in
669	# libtool compile mode
670	compile)
671	modename="$modename: compile"
672	# Get the compilation command and the source file.
673	base_compile=
674	srcfile="$nonopt" # always keep a non-empty value in "srcfile"
675	suppress_opt=yes
676	suppress_output=
677	arg_mode=normal
678	libobj=
679	later=
680
681	for arg
682	do
683	case $arg_mode in
684	arg )
685	# do not "continue". Instead, add this to base_compile
686	lastarg="$arg"
687	arg_mode=normal
688	;;
689
690	target )
691	libobj="$arg"
692	arg_mode=normal
693	continue
694	;;
695
696	normal )
697	# Accept any command-line options.
698	case $arg in
699	-o)
700	if test -n "$libobj" ; then
701	$echo "$modename: you cannot specify \`-o' more than once" 1>&2
702	exit $EXIT_FAILURE
703	fi
704	arg_mode=target
705	continue
706	;;
707
708	-static \| -prefer-pic \| -prefer-non-pic)
709	later="$later $arg"
710	continue
711	;;
712
713	-no-suppress)
714	suppress_opt=no
715	continue
716	;;
717
718	-Xcompiler)
719	arg_mode=arg # the next one goes into the "base_compile" arg list
720	continue # The current "srcfile" will either be retained or
721	;; # replaced later. I would guess that would be a bug.
722
723	-Wc,*)
724	args=`$echo "X$arg" \| $Xsed -e "s/^-Wc,//"`
725	lastarg=
726	save_ifs="$IFS"; IFS=','
727	for arg in $args; do
728	IFS="$save_ifs"
729
730	# Double-quote args containing other shell metacharacters.
731	# Many Bourne shells cannot handle close brackets correctly
732	# in scan sets, so we specify it separately.
733	case $arg in
734	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
735	arg="\"$arg\""
736	;;
737	esac
738	lastarg="$lastarg $arg"
739	done
740	IFS="$save_ifs"
741	lastarg=`$echo "X$lastarg" \| $Xsed -e "s/^ //"`
742
743	# Add the arguments to base_compile.
744	base_compile="$base_compile $lastarg"
745	continue
746	;;
747
748	* )
749	# Accept the current argument as the source file.
750	# The previous "srcfile" becomes the current argument.
751	#
752	lastarg="$srcfile"
753	srcfile="$arg"
754	;;
755	esac # case $arg
756	;;
757	esac # case $arg_mode
758
759	# Aesthetically quote the previous argument.
760	lastarg=`$echo "X$lastarg" \| $Xsed -e "$sed_quote_subst"`
761
762	case $lastarg in
763	# Double-quote args containing other shell metacharacters.
764	# Many Bourne shells cannot handle close brackets correctly
765	# in scan sets, and some SunOS ksh mistreat backslash-escaping
766	# in scan sets (worked around with variable expansion),
767	# and furthermore cannot handle '\|' '&' '(' ')' in scan sets
768	# at all, so we specify them separately.
769	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
770	lastarg="\"$lastarg\""
771	;;
772	esac
773
774	base_compile="$base_compile $lastarg"
775	done # for arg
776
777	case $arg_mode in
778	arg)
779	$echo "$modename: you must specify an argument for -Xcompile"
780	exit $EXIT_FAILURE
781	;;
782	target)
783	$echo "$modename: you must specify a target with \`-o'" 1>&2
784	exit $EXIT_FAILURE
785	;;
786	*)
787	# Get the name of the library object.
788	[ -z "$libobj" ] && libobj=`$echo "X$srcfile" \| $Xsed -e 's%^.*/%%'`
789	;;
790	esac
791
792	# Recognize several different file suffixes.
793	# If the user specifies -o file.o, it is replaced with file.lo
794	xform='[cCFSifmso]'
795	case $libobj in
796	*.ada) xform=ada ;;
797	*.adb) xform=adb ;;
798	*.ads) xform=ads ;;
799	*.asm) xform=asm ;;
800	*.c++) xform=c++ ;;
801	*.cc) xform=cc ;;
802	*.ii) xform=ii ;;
803	*.class) xform=class ;;
804	*.cpp) xform=cpp ;;
805	*.cxx) xform=cxx ;;
806	*.f90) xform=f90 ;;
807	*.for) xform=for ;;
808	*.java) xform=java ;;
809	esac
810
811	libobj=`$echo "X$libobj" \| $Xsed -e "s/\.$xform$/.lo/"`
812
813	case $libobj in
814	*.lo) obj=`$echo "X$libobj" \| $Xsed -e "$lo2o"` ;;
815	*)
816	$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
817	exit $EXIT_FAILURE
818	;;
819	esac
820
821	func_infer_tag $base_compile
822
823	for arg in $later; do
824	case $arg in
825	-static)
826	build_old_libs=yes
827	continue
828	;;
829
830	-prefer-pic)
831	pic_mode=yes
832	continue
833	;;
834
835	-prefer-non-pic)
836	pic_mode=no
837	continue
838	;;
839	esac
840	done
841
842	qlibobj=`$echo "X$libobj" \| $Xsed -e "$sed_quote_subst"`
843	case $qlibobj in
844	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
845	qlibobj="\"$qlibobj\"" ;;
846	esac
847	test "X$libobj" != "X$qlibobj" \
848	&& $echo "X$libobj" \| grep '[]~#^*{};<>?"'"'"' &()\|`$[]' \
849	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
850	objname=`$echo "X$obj" \| $Xsed -e 's%^.*/%%'`
851	xdir=`$echo "X$obj" \| $Xsed -e 's%/[^/]*$%%'`
852	if test "X$xdir" = "X$obj"; then
853	xdir=
854	else
855	xdir=$xdir/
856	fi
857	lobj=${xdir}$objdir/$objname
858
859	if test -z "$base_compile"; then
860	$echo "$modename: you must specify a compilation command" 1>&2
861	$echo "$help" 1>&2
862	exit $EXIT_FAILURE
863	fi
864
865	# Delete any leftover library objects.
866	if test "$build_old_libs" = yes; then
867	removelist="$obj $lobj $libobj ${libobj}T"
868	else
869	removelist="$lobj $libobj ${libobj}T"
870	fi
871
872	$run $rm $removelist
873	trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
874
875	# On Cygwin there's no "real" PIC flag so we must build both object types
876	case $host_os in
877	cygwin* \| mingw* \| pw32* \| os2*)
878	pic_mode=default
879	;;
880	esac
881	if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
882	# non-PIC code in shared libraries is not supported
883	pic_mode=default
884	fi
885
886	# Calculate the filename of the output object if compiler does
887	# not support -o with -c
888	if test "$compiler_c_o" = no; then
889	output_obj=`$echo "X$srcfile" \| $Xsed -e 's%^./%%' -e 's%\.[^.]$%%'`.${objext}
890	lockfile="$output_obj.lock"
891	removelist="$removelist $output_obj $lockfile"
892	trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
893	else
894	output_obj=
895	need_locks=no
896	lockfile=
897	fi
898
899	# Lock this critical section if it is needed
900	# We use this script file to make the link, it avoids creating a new file
901	if test "$need_locks" = yes; then
902	until $run ln "$srcfile" "$lockfile" 2>/dev/null; do
903	$show "Waiting for $lockfile to be removed"
904	sleep 2
905	done
906	elif test "$need_locks" = warn; then
907	if test -f "$lockfile"; then
908	$echo "\
909	*** ERROR, $lockfile exists and contains:
910	`cat $lockfile 2>/dev/null`
911
912	This indicates that another process is trying to use the same
913	temporary object file, and libtool could not work around it because
914	your compiler does not support \`-c' and \`-o' together. If you
915	repeat this compilation, it may succeed, by chance, but you had better
916	avoid parallel builds (make -j) in this platform, or get a better
917	compiler."
918
919	$run $rm $removelist
920	exit $EXIT_FAILURE
921	fi
922	$echo "$srcfile" > "$lockfile"
923	fi
924
925	if test -n "$fix_srcfile_path"; then
926	eval srcfile=\"$fix_srcfile_path\"
927	fi
928	qsrcfile=`$echo "X$srcfile" \| $Xsed -e "$sed_quote_subst"`
929	case $qsrcfile in
930	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
931	qsrcfile="\"$qsrcfile\"" ;;
932	esac
933
934	$run $rm "$libobj" "${libobj}T"
935
936	# Create a libtool object file (analogous to a ".la" file),
937	# but don't create it if we're doing a dry run.
938	test -z "$run" && cat > ${libobj}T <<EOF
939	# $libobj - a libtool object file
940	# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
941	#
942	# Please DO NOT delete this file!
943	# It is necessary for linking the library.
944
945	# Name of the PIC object.
946	EOF
947
948	# Only build a PIC object if we are building libtool libraries.
949	if test "$build_libtool_libs" = yes; then
950	# Without this assignment, base_compile gets emptied.
951	fbsd_hideous_sh_bug=$base_compile
952
953	if test "$pic_mode" != no; then
954	command="$base_compile $qsrcfile $pic_flag"
955	else
956	# Don't build PIC code
957	command="$base_compile $qsrcfile"
958	fi
959
960	if test ! -d "${xdir}$objdir"; then
961	$show "$mkdir ${xdir}$objdir"
962	$run $mkdir ${xdir}$objdir
963	exit_status=$?
964	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
965	exit $exit_status
966	fi
967	fi
968
969	if test -z "$output_obj"; then
970	# Place PIC objects in $objdir
971	command="$command -o $lobj"
972	fi
973
974	$run $rm "$lobj" "$output_obj"
975
976	$show "$command"
977	if $run eval "$command"; then :
978	else
979	test -n "$output_obj" && $run $rm $removelist
980	exit $EXIT_FAILURE
981	fi
982
983	if test "$need_locks" = warn &&
984	test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
985	$echo "\
986	*** ERROR, $lockfile contains:
987	`cat $lockfile 2>/dev/null`
988
989	but it should contain:
990	$srcfile
991
992	This indicates that another process is trying to use the same
993	temporary object file, and libtool could not work around it because
994	your compiler does not support \`-c' and \`-o' together. If you
995	repeat this compilation, it may succeed, by chance, but you had better
996	avoid parallel builds (make -j) in this platform, or get a better
997	compiler."
998
999	$run $rm $removelist
1000	exit $EXIT_FAILURE
1001	fi
1002
1003	# Just move the object if needed, then go on to compile the next one
1004	if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
1005	$show "$mv $output_obj $lobj"
1006	if $run $mv $output_obj $lobj; then :
1007	else
1008	error=$?
1009	$run $rm $removelist
1010	exit $error
1011	fi
1012	fi
1013
1014	# Append the name of the PIC object to the libtool object file.
1015	test -z "$run" && cat >> ${libobj}T <<EOF
1016	pic_object='$objdir/$objname'
1017
1018	EOF
1019
1020	# Allow error messages only from the first compilation.
1021	if test "$suppress_opt" = yes; then
1022	suppress_output=' >/dev/null 2>&1'
1023	fi
1024	else
1025	# No PIC object so indicate it doesn't exist in the libtool
1026	# object file.
1027	test -z "$run" && cat >> ${libobj}T <<EOF
1028	pic_object=none
1029
1030	EOF
1031	fi
1032
1033	# Only build a position-dependent object if we build old libraries.
1034	if test "$build_old_libs" = yes; then
1035	if test "$pic_mode" != yes; then
1036	# Don't build PIC code
1037	command="$base_compile $qsrcfile"
1038	else
1039	command="$base_compile $qsrcfile $pic_flag"
1040	fi
1041	if test "$compiler_c_o" = yes; then
1042	command="$command -o $obj"
1043	fi
1044
1045	# Suppress compiler output if we already did a PIC compilation.
1046	command="$command$suppress_output"
1047	$run $rm "$obj" "$output_obj"
1048	$show "$command"
1049	if $run eval "$command"; then :
1050	else
1051	$run $rm $removelist
1052	exit $EXIT_FAILURE
1053	fi
1054
1055	if test "$need_locks" = warn &&
1056	test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
1057	$echo "\
1058	*** ERROR, $lockfile contains:
1059	`cat $lockfile 2>/dev/null`
1060
1061	but it should contain:
1062	$srcfile
1063
1064	This indicates that another process is trying to use the same
1065	temporary object file, and libtool could not work around it because
1066	your compiler does not support \`-c' and \`-o' together. If you
1067	repeat this compilation, it may succeed, by chance, but you had better
1068	avoid parallel builds (make -j) in this platform, or get a better
1069	compiler."
1070
1071	$run $rm $removelist
1072	exit $EXIT_FAILURE
1073	fi
1074
1075	# Just move the object if needed
1076	if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
1077	$show "$mv $output_obj $obj"
1078	if $run $mv $output_obj $obj; then :
1079	else
1080	error=$?
1081	$run $rm $removelist
1082	exit $error
1083	fi
1084	fi
1085
1086	# Append the name of the non-PIC object the libtool object file.
1087	# Only append if the libtool object file exists.
1088	test -z "$run" && cat >> ${libobj}T <<EOF
1089	# Name of the non-PIC object.
1090	non_pic_object='$objname'
1091
1092	EOF
1093	else
1094	# Append the name of the non-PIC object the libtool object file.
1095	# Only append if the libtool object file exists.
1096	test -z "$run" && cat >> ${libobj}T <<EOF
1097	# Name of the non-PIC object.
1098	non_pic_object=none
1099
1100	EOF
1101	fi
1102
1103	$run $mv "${libobj}T" "${libobj}"
1104
1105	# Unlock the critical section if it was locked
1106	if test "$need_locks" != no; then
1107	$run $rm "$lockfile"
1108	fi
1109
1110	exit $EXIT_SUCCESS
1111	;;
1112
1113	# libtool link mode
1114	link \| relink)
1115	modename="$modename: link"
1116	case $host in
1117	--cygwin* \| --mingw* \| --pw32* \| --os2*)
1118	# It is impossible to link a dll without this setting, and
1119	# we shouldn't force the makefile maintainer to figure out
1120	# which system we are compiling for in order to pass an extra
1121	# flag for every libtool invocation.
1122	# allow_undefined=no
1123
1124	# FIXME: Unfortunately, there are problems with the above when trying
1125	# to make a dll which has undefined symbols, in which case not
1126	# even a static library is built. For now, we need to specify
1127	# -no-undefined on the libtool link line when we can be certain
1128	# that all symbols are satisfied, otherwise we get a static library.
1129	allow_undefined=yes
1130	;;
1131	*)
1132	allow_undefined=yes
1133	;;
1134	esac
1135	libtool_args="$nonopt"
1136	base_compile="$nonopt $@"
1137	compile_command="$nonopt"
1138	finalize_command="$nonopt"
1139
1140	compile_rpath=
1141	finalize_rpath=
1142	compile_shlibpath=
1143	finalize_shlibpath=
1144	convenience=
1145	old_convenience=
1146	deplibs=
1147	old_deplibs=
1148	compiler_flags=
1149	linker_flags=
1150	dllsearchpath=
1151	lib_search_path=`pwd`
1152	inst_prefix_dir=
1153
1154	avoid_version=no
1155	dlfiles=
1156	dlprefiles=
1157	dlself=no
1158	export_dynamic=no
1159	export_symbols=
1160	export_symbols_regex=
1161	generated=
1162	libobjs=
1163	ltlibs=
1164	module=no
1165	no_install=no
1166	objs=
1167	non_pic_objects=
1168	notinst_path= # paths that contain not-installed libtool libraries
1169	precious_files_regex=
1170	prefer_static_libs=no
1171	preload=no
1172	prev=
1173	prevarg=
1174	release=
1175	rpath=
1176	xrpath=
1177	perm_rpath=
1178	temp_rpath=
1179	thread_safe=no
1180	vinfo=
1181	vinfo_number=no
1182
1183	func_infer_tag $base_compile
1184
1185	# We need to know -static, to get the right output filenames.
1186	for arg
1187	do
1188	case $arg in
1189	-all-static \| -static)
1190	if test "X$arg" = "X-all-static"; then
1191	if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
1192	$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
1193	fi
1194	if test -n "$link_static_flag"; then
1195	dlopen_self=$dlopen_self_static
1196	fi
1197	prefer_static_libs=yes
1198	else
1199	if test -z "$pic_flag" && test -n "$link_static_flag"; then
1200	dlopen_self=$dlopen_self_static
1201	fi
1202	prefer_static_libs=built
1203	fi
1204	build_libtool_libs=no
1205	build_old_libs=yes
1206	break
1207	;;
1208	esac
1209	done
1210
1211	# See if our shared archives depend on static archives.
1212	test -n "$old_archive_from_new_cmds" && build_old_libs=yes
1213
1214	# Go through the arguments, transforming them on the way.
1215	while test "$#" -gt 0; do
1216	arg="$1"
1217	shift
1218	case $arg in
1219	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1220	qarg=\"`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
1221	;;
1222	*) qarg=$arg ;;
1223	esac
1224	libtool_args="$libtool_args $qarg"
1225
1226	# If the previous option needs an argument, assign it.
1227	if test -n "$prev"; then
1228	case $prev in
1229	output)
1230	compile_command="$compile_command @OUTPUT@"
1231	finalize_command="$finalize_command @OUTPUT@"
1232	;;
1233	esac
1234
1235	case $prev in
1236	dlfiles\|dlprefiles)
1237	if test "$preload" = no; then
1238	# Add the symbol object into the linking commands.
1239	compile_command="$compile_command @SYMFILE@"
1240	finalize_command="$finalize_command @SYMFILE@"
1241	preload=yes
1242	fi
1243	case $arg in
1244	.la \| .lo) ;; # We handle these cases below.
1245	force)
1246	if test "$dlself" = no; then
1247	dlself=needless
1248	export_dynamic=yes
1249	fi
1250	prev=
1251	continue
1252	;;
1253	self)
1254	if test "$prev" = dlprefiles; then
1255	dlself=yes
1256	elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
1257	dlself=yes
1258	else
1259	dlself=needless
1260	export_dynamic=yes
1261	fi
1262	prev=
1263	continue
1264	;;
1265	*)
1266	if test "$prev" = dlfiles; then
1267	dlfiles="$dlfiles $arg"
1268	else
1269	dlprefiles="$dlprefiles $arg"
1270	fi
1271	prev=
1272	continue
1273	;;
1274	esac
1275	;;
1276	expsyms)
1277	export_symbols="$arg"
1278	if test ! -f "$arg"; then
1279	$echo "$modename: symbol file \`$arg' does not exist"
1280	exit $EXIT_FAILURE
1281	fi
1282	prev=
1283	continue
1284	;;
1285	expsyms_regex)
1286	export_symbols_regex="$arg"
1287	prev=
1288	continue
1289	;;
1290	inst_prefix)
1291	inst_prefix_dir="$arg"
1292	prev=
1293	continue
1294	;;
1295	precious_regex)
1296	precious_files_regex="$arg"
1297	prev=
1298	continue
1299	;;
1300	release)
1301	release="-$arg"
1302	prev=
1303	continue
1304	;;
1305	objectlist)
1306	if test -f "$arg"; then
1307	save_arg=$arg
1308	moreargs=
1309	for fil in `cat $save_arg`
1310	do
1311	# moreargs="$moreargs $fil"
1312	arg=$fil
1313	# A libtool-controlled object.
1314
1315	# Check to see that this really is a libtool object.
1316	if (${SED} -e '2q' $arg \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1317	pic_object=
1318	non_pic_object=
1319
1320	# Read the .lo file
1321	# If there is no directory component, then add one.
1322	case $arg in
1323	/ \| \\) . $arg ;;
1324	*) . ./$arg ;;
1325	esac
1326
1327	if test -z "$pic_object" \|\| \
1328	test -z "$non_pic_object" \|\|
1329	test "$pic_object" = none && \
1330	test "$non_pic_object" = none; then
1331	$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1332	exit $EXIT_FAILURE
1333	fi
1334
1335	# Extract subdirectory from the argument.
1336	xdir=`$echo "X$arg" \| $Xsed -e 's%/[^/]*$%%'`
1337	if test "X$xdir" = "X$arg"; then
1338	xdir=
1339	else
1340	xdir="$xdir/"
1341	fi
1342
1343	if test "$pic_object" != none; then
1344	# Prepend the subdirectory the object is found in.
1345	pic_object="$xdir$pic_object"
1346
1347	if test "$prev" = dlfiles; then
1348	if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1349	dlfiles="$dlfiles $pic_object"
1350	prev=
1351	continue
1352	else
1353	# If libtool objects are unsupported, then we need to preload.
1354	prev=dlprefiles
1355	fi
1356	fi
1357
1358	# CHECK ME: I think I busted this. -Ossama
1359	if test "$prev" = dlprefiles; then
1360	# Preload the old-style object.
1361	dlprefiles="$dlprefiles $pic_object"
1362	prev=
1363	fi
1364
1365	# A PIC object.
1366	libobjs="$libobjs $pic_object"
1367	arg="$pic_object"
1368	fi
1369
1370	# Non-PIC object.
1371	if test "$non_pic_object" != none; then
1372	# Prepend the subdirectory the object is found in.
1373	non_pic_object="$xdir$non_pic_object"
1374
1375	# A standard non-PIC object
1376	non_pic_objects="$non_pic_objects $non_pic_object"
1377	if test -z "$pic_object" \|\| test "$pic_object" = none ; then
1378	arg="$non_pic_object"
1379	fi
1380	else
1381	# If the PIC object exists, use it instead.
1382	# $xdir was prepended to $pic_object above.
1383	non_pic_object="$pic_object"
1384	non_pic_objects="$non_pic_objects $non_pic_object"
1385	fi
1386	else
1387	# Only an error if not doing a dry-run.
1388	if test -z "$run"; then
1389	$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1390	exit $EXIT_FAILURE
1391	else
1392	# Dry-run case.
1393
1394	# Extract subdirectory from the argument.
1395	xdir=`$echo "X$arg" \| $Xsed -e 's%/[^/]*$%%'`
1396	if test "X$xdir" = "X$arg"; then
1397	xdir=
1398	else
1399	xdir="$xdir/"
1400	fi
1401
1402	pic_object=`$echo "X${xdir}${objdir}/${arg}" \| $Xsed -e "$lo2o"`
1403	non_pic_object=`$echo "X${xdir}${arg}" \| $Xsed -e "$lo2o"`
1404	libobjs="$libobjs $pic_object"
1405	non_pic_objects="$non_pic_objects $non_pic_object"
1406	fi
1407	fi
1408	done
1409	else
1410	$echo "$modename: link input file \`$save_arg' does not exist"
1411	exit $EXIT_FAILURE
1412	fi
1413	arg=$save_arg
1414	prev=
1415	continue
1416	;;
1417	rpath \| xrpath)
1418	# We need an absolute path.
1419	case $arg in
1420	[\\/]* \| [A-Za-z]:[\\/]*) ;;
1421	*)
1422	$echo "$modename: only absolute run-paths are allowed" 1>&2
1423	exit $EXIT_FAILURE
1424	;;
1425	esac
1426	if test "$prev" = rpath; then
1427	case "$rpath " in
1428	" $arg ") ;;
1429	*) rpath="$rpath $arg" ;;
1430	esac
1431	else
1432	case "$xrpath " in
1433	" $arg ") ;;
1434	*) xrpath="$xrpath $arg" ;;
1435	esac
1436	fi
1437	prev=
1438	continue
1439	;;
1440	xcompiler)
1441	compiler_flags="$compiler_flags $qarg"
1442	prev=
1443	compile_command="$compile_command $qarg"
1444	finalize_command="$finalize_command $qarg"
1445	continue
1446	;;
1447	xlinker)
1448	linker_flags="$linker_flags $qarg"
1449	compiler_flags="$compiler_flags $wl$qarg"
1450	prev=
1451	compile_command="$compile_command $wl$qarg"
1452	finalize_command="$finalize_command $wl$qarg"
1453	continue
1454	;;
1455	xcclinker)
1456	linker_flags="$linker_flags $qarg"
1457	compiler_flags="$compiler_flags $qarg"
1458	prev=
1459	compile_command="$compile_command $qarg"
1460	finalize_command="$finalize_command $qarg"
1461	continue
1462	;;
1463	shrext)
1464	shrext_cmds="$arg"
1465	prev=
1466	continue
1467	;;
1468	darwin_framework\|darwin_framework_skip)
1469	test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
1470	compile_command="$compile_command $arg"
1471	finalize_command="$finalize_command $arg"
1472	prev=
1473	continue
1474	;;
1475	*)
1476	eval "$prev=\"\$arg\""
1477	prev=
1478	continue
1479	;;
1480	esac
1481	fi # test -n "$prev"
1482
1483	prevarg="$arg"
1484
1485	case $arg in
1486	-all-static)
1487	if test -n "$link_static_flag"; then
1488	compile_command="$compile_command $link_static_flag"
1489	finalize_command="$finalize_command $link_static_flag"
1490	fi
1491	continue
1492	;;
1493
1494	-allow-undefined)
1495	# FIXME: remove this flag sometime in the future.
1496	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
1497	continue
1498	;;
1499
1500	-avoid-version)
1501	avoid_version=yes
1502	continue
1503	;;
1504
1505	-dlopen)
1506	prev=dlfiles
1507	continue
1508	;;
1509
1510	-dlpreopen)
1511	prev=dlprefiles
1512	continue
1513	;;
1514
1515	-export-dynamic)
1516	export_dynamic=yes
1517	continue
1518	;;
1519
1520	-export-symbols \| -export-symbols-regex)
1521	if test -n "$export_symbols" \|\| test -n "$export_symbols_regex"; then
1522	$echo "$modename: more than one -exported-symbols argument is not allowed"
1523	exit $EXIT_FAILURE
1524	fi
1525	if test "X$arg" = "X-export-symbols"; then
1526	prev=expsyms
1527	else
1528	prev=expsyms_regex
1529	fi
1530	continue
1531	;;
1532
1533	-framework\|-arch\|-isysroot)
1534	case " $CC " in
1535	" ${arg} ${1} " \| " ${arg} ${1} ")
1536	prev=darwin_framework_skip ;;
1537	*) compiler_flags="$compiler_flags $arg"
1538	prev=darwin_framework ;;
1539	esac
1540	compile_command="$compile_command $arg"
1541	finalize_command="$finalize_command $arg"
1542	continue
1543	;;
1544
1545	-inst-prefix-dir)
1546	prev=inst_prefix
1547	continue
1548	;;
1549
1550	# The native IRIX linker understands -LANG:, -LIST: and -LNO:*
1551	# so, if we see these flags be careful not to treat them like -L
1552	-L[A-Z][A-Z]:)
1553	case $with_gcc/$host in
1554	no/--irix* \| /--irix*)
1555	compile_command="$compile_command $arg"
1556	finalize_command="$finalize_command $arg"
1557	;;
1558	esac
1559	continue
1560	;;
1561
1562	-L*)
1563	dir=`$echo "X$arg" \| $Xsed -e 's/^-L//'`
1564	# We need an absolute path.
1565	case $dir in
1566	[\\/]* \| [A-Za-z]:[\\/]*) ;;
1567	*)
1568	absdir=`cd "$dir" && pwd`
1569	if test -z "$absdir"; then
1570	$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
1571	absdir="$dir"
1572	notinst_path="$notinst_path $dir"
1573	fi
1574	dir="$absdir"
1575	;;
1576	esac
1577	case "$deplibs " in
1578	" -L$dir ") ;;
1579	*)
1580	deplibs="$deplibs -L$dir"
1581	lib_search_path="$lib_search_path $dir"
1582	;;
1583	esac
1584	case $host in
1585	--cygwin* \| --mingw* \| --pw32* \| --os2*)
1586	testbindir=`$echo "X$dir" \| $Xsed -e 's/lib$/bin*'`
1587	case :$dllsearchpath: in
1588	":$dir:") ;;
1589	*) dllsearchpath="$dllsearchpath:$dir";;
1590	esac
1591	case :$dllsearchpath: in
1592	":$testbindir:") ;;
1593	*) dllsearchpath="$dllsearchpath:$testbindir";;
1594	esac
1595	;;
1596	esac
1597	continue
1598	;;
1599
1600	-l*)
1601	if test "X$arg" = "X-lc" \|\| test "X$arg" = "X-lm"; then
1602	case $host in
1603	--cygwin* \| --mingw* \| --pw32* \| --beos*)
1604	# These systems don't actually have a C or math library (as such)
1605	continue
1606	;;
1607	--os2*)
1608	# These systems don't actually have a C library (as such)
1609	test "X$arg" = "X-lc" && continue
1610	;;
1611	--openbsd* \| --freebsd* \| --dragonfly*)
1612	# Do not include libc due to us having libc/libc_r.
1613	test "X$arg" = "X-lc" && continue
1614	;;
1615	--rhapsody* \| --darwin1.[012])
1616	# Rhapsody C and math libraries are in the System framework
1617	deplibs="$deplibs -framework System"
1618	continue
1619	;;
1620	--sco3.2v5* \| --sco5v6*)
1621	# Causes problems with __ctype
1622	test "X$arg" = "X-lc" && continue
1623	;;
1624	--sysv4.2uw2* \| --sysv5* \| --unixware* \| --OpenUNIX*)
1625	# Compiler inserts libc in the correct place for threads to work
1626	test "X$arg" = "X-lc" && continue
1627	;;
1628	esac
1629	elif test "X$arg" = "X-lc_r"; then
1630	case $host in
1631	--openbsd* \| --freebsd* \| --dragonfly*)
1632	# Do not include libc_r directly, use -pthread flag.
1633	continue
1634	;;
1635	esac
1636	fi
1637	deplibs="$deplibs $arg"
1638	continue
1639	;;
1640
1641	# Tru64 UNIX uses -model [arg] to determine the layout of C++
1642	# classes, name mangling, and exception handling.
1643	-model)
1644	compile_command="$compile_command $arg"
1645	compiler_flags="$compiler_flags $arg"
1646	finalize_command="$finalize_command $arg"
1647	prev=xcompiler
1648	continue
1649	;;
1650
1651	-mt\|-mthreads\|-kthread\|-Kthread\|-pthread\|-pthreads\|--thread-safe)
1652	compiler_flags="$compiler_flags $arg"
1653	compile_command="$compile_command $arg"
1654	finalize_command="$finalize_command $arg"
1655	continue
1656	;;
1657
1658	-module)
1659	module=yes
1660	continue
1661	;;
1662
1663	# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
1664	# -r[0-9][0-9]* specifies the processor on the SGI compiler
1665	# -xarch=, -xtarget= enable 64-bit mode on the Sun compiler
1666	# +DA, +DD enable 64-bit mode on the HP compiler
1667	# -q* pass through compiler args for the IBM compiler
1668	# -m* pass through architecture-specific compiler args for GCC
1669	# -m, -t[45], -txscale* pass through architecture-specific
1670	# compiler args for GCC
1671	# -pg pass through profiling flag for GCC
1672	# @file GCC response files
1673	-64\|-mips[0-9]\|-r[0-9][0-9]\|-xarch=\|-xtarget=\|+DA\|+DD\|-q\|-m*\|-pg\| \
1674	-t[45]\|-txscale\|@*)
1675
1676	# Unknown arguments in both finalize_command and compile_command need
1677	# to be aesthetically quoted because they are evaled later.
1678	arg=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`
1679	case $arg in
1680	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1681	arg="\"$arg\""
1682	;;
1683	esac
1684	compile_command="$compile_command $arg"
1685	finalize_command="$finalize_command $arg"
1686	compiler_flags="$compiler_flags $arg"
1687	continue
1688	;;
1689
1690	-shrext)
1691	prev=shrext
1692	continue
1693	;;
1694
1695	-no-fast-install)
1696	fast_install=no
1697	continue
1698	;;
1699
1700	-no-install)
1701	case $host in
1702	--cygwin* \| --mingw* \| --pw32* \| --os2*)
1703	# The PATH hackery in wrapper scripts is required on Windows
1704	# in order for the loader to find any dlls it needs.
1705	$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
1706	$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
1707	fast_install=no
1708	;;
1709	*) no_install=yes ;;
1710	esac
1711	continue
1712	;;
1713
1714	-no-undefined)
1715	allow_undefined=no
1716	continue
1717	;;
1718
1719	-objectlist)
1720	prev=objectlist
1721	continue
1722	;;
1723
1724	-o) prev=output ;;
1725
1726	-precious-files-regex)
1727	prev=precious_regex
1728	continue
1729	;;
1730
1731	-release)
1732	prev=release
1733	continue
1734	;;
1735
1736	-rpath)
1737	prev=rpath
1738	continue
1739	;;
1740
1741	-R)
1742	prev=xrpath
1743	continue
1744	;;
1745
1746	-R*)
1747	dir=`$echo "X$arg" \| $Xsed -e 's/^-R//'`
1748	# We need an absolute path.
1749	case $dir in
1750	[\\/]* \| [A-Za-z]:[\\/]*) ;;
1751	*)
1752	$echo "$modename: only absolute run-paths are allowed" 1>&2
1753	exit $EXIT_FAILURE
1754	;;
1755	esac
1756	case "$xrpath " in
1757	" $dir ") ;;
1758	*) xrpath="$xrpath $dir" ;;
1759	esac
1760	continue
1761	;;
1762
1763	-static)
1764	# The effects of -static are defined in a previous loop.
1765	# We used to do the same as -all-static on platforms that
1766	# didn't have a PIC flag, but the assumption that the effects
1767	# would be equivalent was wrong. It would break on at least
1768	# Digital Unix and AIX.
1769	continue
1770	;;
1771
1772	-thread-safe)
1773	thread_safe=yes
1774	continue
1775	;;
1776
1777	-version-info)
1778	prev=vinfo
1779	continue
1780	;;
1781	-version-number)
1782	prev=vinfo
1783	vinfo_number=yes
1784	continue
1785	;;
1786
1787	-Wc,*)
1788	args=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
1789	arg=
1790	save_ifs="$IFS"; IFS=','
1791	for flag in $args; do
1792	IFS="$save_ifs"
1793	case $flag in
1794	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1795	flag="\"$flag\""
1796	;;
1797	esac
1798	arg="$arg $wl$flag"
1799	compiler_flags="$compiler_flags $flag"
1800	done
1801	IFS="$save_ifs"
1802	arg=`$echo "X$arg" \| $Xsed -e "s/^ //"`
1803	;;
1804
1805	-Wl,*)
1806	args=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
1807	arg=
1808	save_ifs="$IFS"; IFS=','
1809	for flag in $args; do
1810	IFS="$save_ifs"
1811	case $flag in
1812	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1813	flag="\"$flag\""
1814	;;
1815	esac
1816	arg="$arg $wl$flag"
1817	compiler_flags="$compiler_flags $wl$flag"
1818	linker_flags="$linker_flags $flag"
1819	done
1820	IFS="$save_ifs"
1821	arg=`$echo "X$arg" \| $Xsed -e "s/^ //"`
1822	;;
1823
1824	-Xcompiler)
1825	prev=xcompiler
1826	continue
1827	;;
1828
1829	-Xlinker)
1830	prev=xlinker
1831	continue
1832	;;
1833
1834	-XCClinker)
1835	prev=xcclinker
1836	continue
1837	;;
1838
1839	# Some other compiler flag.
1840	-* \| +*)
1841	# Unknown arguments in both finalize_command and compile_command need
1842	# to be aesthetically quoted because they are evaled later.
1843	arg=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`
1844	case $arg in
1845	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1846	arg="\"$arg\""
1847	;;
1848	esac
1849	;;
1850
1851	*.$objext)
1852	# A standard object.
1853	objs="$objs $arg"
1854	;;
1855
1856	*.lo)
1857	# A libtool-controlled object.
1858
1859	# Check to see that this really is a libtool object.
1860	if (${SED} -e '2q' $arg \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1861	pic_object=
1862	non_pic_object=
1863
1864	# Read the .lo file
1865	# If there is no directory component, then add one.
1866	case $arg in
1867	/ \| \\) . $arg ;;
1868	*) . ./$arg ;;
1869	esac
1870
1871	if test -z "$pic_object" \|\| \
1872	test -z "$non_pic_object" \|\|
1873	test "$pic_object" = none && \
1874	test "$non_pic_object" = none; then
1875	$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1876	exit $EXIT_FAILURE
1877	fi
1878
1879	# Extract subdirectory from the argument.
1880	xdir=`$echo "X$arg" \| $Xsed -e 's%/[^/]*$%%'`
1881	if test "X$xdir" = "X$arg"; then
1882	xdir=
1883	else
1884	xdir="$xdir/"
1885	fi
1886
1887	if test "$pic_object" != none; then
1888	# Prepend the subdirectory the object is found in.
1889	pic_object="$xdir$pic_object"
1890
1891	if test "$prev" = dlfiles; then
1892	if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1893	dlfiles="$dlfiles $pic_object"
1894	prev=
1895	continue
1896	else
1897	# If libtool objects are unsupported, then we need to preload.
1898	prev=dlprefiles
1899	fi
1900	fi
1901
1902	# CHECK ME: I think I busted this. -Ossama
1903	if test "$prev" = dlprefiles; then
1904	# Preload the old-style object.
1905	dlprefiles="$dlprefiles $pic_object"
1906	prev=
1907	fi
1908
1909	# A PIC object.
1910	libobjs="$libobjs $pic_object"
1911	arg="$pic_object"
1912	fi
1913
1914	# Non-PIC object.
1915	if test "$non_pic_object" != none; then
1916	# Prepend the subdirectory the object is found in.
1917	non_pic_object="$xdir$non_pic_object"
1918
1919	# A standard non-PIC object
1920	non_pic_objects="$non_pic_objects $non_pic_object"
1921	if test -z "$pic_object" \|\| test "$pic_object" = none ; then
1922	arg="$non_pic_object"
1923	fi
1924	else
1925	# If the PIC object exists, use it instead.
1926	# $xdir was prepended to $pic_object above.
1927	non_pic_object="$pic_object"
1928	non_pic_objects="$non_pic_objects $non_pic_object"
1929	fi
1930	else
1931	# Only an error if not doing a dry-run.
1932	if test -z "$run"; then
1933	$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1934	exit $EXIT_FAILURE
1935	else
1936	# Dry-run case.
1937
1938	# Extract subdirectory from the argument.
1939	xdir=`$echo "X$arg" \| $Xsed -e 's%/[^/]*$%%'`
1940	if test "X$xdir" = "X$arg"; then
1941	xdir=
1942	else
1943	xdir="$xdir/"
1944	fi
1945
1946	pic_object=`$echo "X${xdir}${objdir}/${arg}" \| $Xsed -e "$lo2o"`
1947	non_pic_object=`$echo "X${xdir}${arg}" \| $Xsed -e "$lo2o"`
1948	libobjs="$libobjs $pic_object"
1949	non_pic_objects="$non_pic_objects $non_pic_object"
1950	fi
1951	fi
1952	;;
1953
1954	*.$libext)
1955	# An archive.
1956	deplibs="$deplibs $arg"
1957	old_deplibs="$old_deplibs $arg"
1958	continue
1959	;;
1960
1961	*.la)
1962	# A libtool-controlled library.
1963
1964	if test "$prev" = dlfiles; then
1965	# This library was specified with -dlopen.
1966	dlfiles="$dlfiles $arg"
1967	prev=
1968	elif test "$prev" = dlprefiles; then
1969	# The library was specified with -dlpreopen.
1970	dlprefiles="$dlprefiles $arg"
1971	prev=
1972	else
1973	deplibs="$deplibs $arg"
1974	fi
1975	continue
1976	;;
1977
1978	# Some other compiler argument.
1979	*)
1980	# Unknown arguments in both finalize_command and compile_command need
1981	# to be aesthetically quoted because they are evaled later.
1982	arg=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`
1983	case $arg in
1984	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
1985	arg="\"$arg\""
1986	;;
1987	esac
1988	;;
1989	esac # arg
1990
1991	# Now actually substitute the argument into the commands.
1992	if test -n "$arg"; then
1993	compile_command="$compile_command $arg"
1994	finalize_command="$finalize_command $arg"
1995	fi
1996	done # argument parsing loop
1997
1998	if test -n "$prev"; then
1999	$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
2000	$echo "$help" 1>&2
2001	exit $EXIT_FAILURE
2002	fi
2003
2004	if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
2005	eval arg=\"$export_dynamic_flag_spec\"
2006	compile_command="$compile_command $arg"
2007	finalize_command="$finalize_command $arg"
2008	fi
2009
2010	oldlibs=
2011	# calculate the name of the file, without its directory
2012	outputname=`$echo "X$output" \| $Xsed -e 's%^.*/%%'`
2013	libobjs_save="$libobjs"
2014
2015	if test -n "$shlibpath_var"; then
2016	# get the directories listed in $shlibpath_var
2017	eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \\| \$Xsed -e \'s/:/ /g\'\`
2018	else
2019	shlib_search_path=
2020	fi
2021	eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
2022	eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
2023
2024	output_objdir=`$echo "X$output" \| $Xsed -e 's%/[^/]*$%%'`
2025	if test "X$output_objdir" = "X$output"; then
2026	output_objdir="$objdir"
2027	else
2028	output_objdir="$output_objdir/$objdir"
2029	fi
2030	# Create the object directory.
2031	if test ! -d "$output_objdir"; then
2032	$show "$mkdir $output_objdir"
2033	$run $mkdir $output_objdir
2034	exit_status=$?
2035	if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
2036	exit $exit_status
2037	fi
2038	fi
2039
2040	# Determine the type of output
2041	case $output in
2042	"")
2043	$echo "$modename: you must specify an output file" 1>&2
2044	$echo "$help" 1>&2
2045	exit $EXIT_FAILURE
2046	;;
2047	*.$libext) linkmode=oldlib ;;
2048	.lo \| .$objext) linkmode=obj ;;
2049	*.la) linkmode=lib ;;
2050	*) linkmode=prog ;; # Anything else should be a program.
2051	esac
2052
2053	case $host in
2054	cygwin \| mingw \| pw32)
2055	# don't eliminate duplications in $postdeps and $predeps
2056	duplicate_compiler_generated_deps=yes
2057	;;
2058	*)
2059	duplicate_compiler_generated_deps=$duplicate_deps
2060	;;
2061	esac
2062	specialdeplibs=
2063
2064	libs=
2065	# Find all interdependent deplibs by searching for libraries
2066	# that are linked more than once (e.g. -la -lb -la)
2067	for deplib in $deplibs; do
2068	if test "X$duplicate_deps" = "Xyes" ; then
2069	case "$libs " in
2070	" $deplib ") specialdeplibs="$specialdeplibs $deplib" ;;
2071	esac
2072	fi
2073	libs="$libs $deplib"
2074	done
2075
2076	if test "$linkmode" = lib; then
2077	libs="$predeps $libs $compiler_lib_search_path $postdeps"
2078
2079	# Compute libraries that are listed more than once in $predeps
2080	# $postdeps and mark them as special (i.e., whose duplicates are
2081	# not to be eliminated).
2082	pre_post_deps=
2083	if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
2084	for pre_post_dep in $predeps $postdeps; do
2085	case "$pre_post_deps " in
2086	" $pre_post_dep ") specialdeplibs="$specialdeplibs $pre_post_deps" ;;
2087	esac
2088	pre_post_deps="$pre_post_deps $pre_post_dep"
2089	done
2090	fi
2091	pre_post_deps=
2092	fi
2093
2094	deplibs=
2095	newdependency_libs=
2096	newlib_search_path=
2097	need_relink=no # whether we're linking any uninstalled libtool libraries
2098	notinst_deplibs= # not-installed libtool libraries
2099	case $linkmode in
2100	lib)
2101	passes="conv link"
2102	for file in $dlfiles $dlprefiles; do
2103	case $file in
2104	*.la) ;;
2105	*)
2106	$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
2107	exit $EXIT_FAILURE
2108	;;
2109	esac
2110	done
2111	;;
2112	prog)
2113	compile_deplibs=
2114	finalize_deplibs=
2115	alldeplibs=no
2116	newdlfiles=
2117	newdlprefiles=
2118	passes="conv scan dlopen dlpreopen link"
2119	;;
2120	*) passes="conv"
2121	;;
2122	esac
2123	for pass in $passes; do
2124	if test "$linkmode,$pass" = "lib,link" \|\|
2125	test "$linkmode,$pass" = "prog,scan"; then
2126	libs="$deplibs"
2127	deplibs=
2128	fi
2129	if test "$linkmode" = prog; then
2130	case $pass in
2131	dlopen) libs="$dlfiles" ;;
2132	dlpreopen) libs="$dlprefiles" ;;
2133	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
2134	esac
2135	fi
2136	if test "$pass" = dlopen; then
2137	# Collect dlpreopened libraries
2138	save_deplibs="$deplibs"
2139	deplibs=
2140	fi
2141	for deplib in $libs; do
2142	lib=
2143	found=no
2144	case $deplib in
2145	-mt\|-mthreads\|-kthread\|-Kthread\|-pthread\|-pthreads\|--thread-safe)
2146	if test "$linkmode,$pass" = "prog,link"; then
2147	compile_deplibs="$deplib $compile_deplibs"
2148	finalize_deplibs="$deplib $finalize_deplibs"
2149	else
2150	compiler_flags="$compiler_flags $deplib"
2151	fi
2152	continue
2153	;;
2154	-l*)
2155	if test "$linkmode" != lib && test "$linkmode" != prog; then
2156	$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
2157	continue
2158	fi
2159	name=`$echo "X$deplib" \| $Xsed -e 's/^-l//'`
2160	for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
2161	for search_ext in .la $std_shrext .so .a; do
2162	# Search the libtool library
2163	lib="$searchdir/lib${name}${search_ext}"
2164	if test -f "$lib"; then
2165	if test "$search_ext" = ".la"; then
2166	found=yes
2167	else
2168	found=no
2169	fi
2170	break 2
2171	fi
2172	done
2173	done
2174	if test "$found" != yes; then
2175	# deplib doesn't seem to be a libtool library
2176	if test "$linkmode,$pass" = "prog,link"; then
2177	compile_deplibs="$deplib $compile_deplibs"
2178	finalize_deplibs="$deplib $finalize_deplibs"
2179	else
2180	deplibs="$deplib $deplibs"
2181	test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
2182	fi
2183	continue
2184	else # deplib is a libtool library
2185	# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
2186	# We need to do some special things here, and not later.
2187	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
2188	case " $predeps $postdeps " in
2189	" $deplib ")
2190	if (${SED} -e '2q' $lib \|
2191	grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
2192	library_names=
2193	old_library=
2194	case $lib in
2195	/ \| \\) . $lib ;;
2196	*) . ./$lib ;;
2197	esac
2198	for l in $old_library $library_names; do
2199	ll="$l"
2200	done
2201	if test "X$ll" = "X$old_library" ; then # only static version available
2202	found=no
2203	ladir=`$echo "X$lib" \| $Xsed -e 's%/[^/]*$%%'`
2204	test "X$ladir" = "X$lib" && ladir="."
2205	lib=$ladir/$old_library
2206	if test "$linkmode,$pass" = "prog,link"; then
2207	compile_deplibs="$deplib $compile_deplibs"
2208	finalize_deplibs="$deplib $finalize_deplibs"
2209	else
2210	deplibs="$deplib $deplibs"
2211	test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
2212	fi
2213	continue
2214	fi
2215	fi
2216	;;
2217	*) ;;
2218	esac
2219	fi
2220	fi
2221	;; # -l
2222	-L*)
2223	case $linkmode in
2224	lib)
2225	deplibs="$deplib $deplibs"
2226	test "$pass" = conv && continue
2227	newdependency_libs="$deplib $newdependency_libs"
2228	newlib_search_path="$newlib_search_path "`$echo "X$deplib" \| $Xsed -e 's/^-L//'`
2229	;;
2230	prog)
2231	if test "$pass" = conv; then
2232	deplibs="$deplib $deplibs"
2233	continue
2234	fi
2235	if test "$pass" = scan; then
2236	deplibs="$deplib $deplibs"
2237	else
2238	compile_deplibs="$deplib $compile_deplibs"
2239	finalize_deplibs="$deplib $finalize_deplibs"
2240	fi
2241	newlib_search_path="$newlib_search_path "`$echo "X$deplib" \| $Xsed -e 's/^-L//'`
2242	;;
2243	*)
2244	$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
2245	;;
2246	esac # linkmode
2247	continue
2248	;; # -L
2249	-R*)
2250	if test "$pass" = link; then
2251	dir=`$echo "X$deplib" \| $Xsed -e 's/^-R//'`
2252	# Make sure the xrpath contains only unique directories.
2253	case "$xrpath " in
2254	" $dir ") ;;
2255	*) xrpath="$xrpath $dir" ;;
2256	esac
2257	fi
2258	deplibs="$deplib $deplibs"
2259	continue
2260	;;
2261	*.la) lib="$deplib" ;;
2262	*.$libext)
2263	if test "$pass" = conv; then
2264	deplibs="$deplib $deplibs"
2265	continue
2266	fi
2267	case $linkmode in
2268	lib)
2269	valid_a_lib=no
2270	case $deplibs_check_method in
2271	match_pattern*)
2272	set dummy $deplibs_check_method
2273	match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"`
2274	if eval $echo \"$deplib\" 2>/dev/null \
2275	\| $SED 10q \
2276	\| $EGREP "$match_pattern_regex" > /dev/null; then
2277	valid_a_lib=yes
2278	fi
2279	;;
2280	pass_all)
2281	valid_a_lib=yes
2282	;;
2283	esac
2284	if test "$valid_a_lib" != yes; then
2285	$echo
2286	$echo "*** Warning: Trying to link with static lib archive $deplib."
2287	$echo "*** I have the capability to make that library automatically link in when"
2288	$echo "*** you link to this library. But I can only do this if you have a"
2289	$echo "*** shared version of the library, which you do not appear to have"
2290	$echo "*** because the file extensions .$libext of this argument makes me believe"
2291	$echo "*** that it is just a static archive that I should not used here."
2292	else
2293	$echo
2294	$echo "*** Warning: Linking the shared library $output against the"
2295	$echo "*** static library $deplib is not portable!"
2296	deplibs="$deplib $deplibs"
2297	fi
2298	continue
2299	;;
2300	prog)
2301	if test "$pass" != link; then
2302	deplibs="$deplib $deplibs"
2303	else
2304	compile_deplibs="$deplib $compile_deplibs"
2305	finalize_deplibs="$deplib $finalize_deplibs"
2306	fi
2307	continue
2308	;;
2309	esac # linkmode
2310	;; # *.$libext
2311	.lo \| .$objext)
2312	if test "$pass" = conv; then
2313	deplibs="$deplib $deplibs"
2314	elif test "$linkmode" = prog; then
2315	if test "$pass" = dlpreopen \|\| test "$dlopen_support" != yes \|\| test "$build_libtool_libs" = no; then
2316	# If there is no dlopen support or we're linking statically,
2317	# we need to preload.
2318	newdlprefiles="$newdlprefiles $deplib"
2319	compile_deplibs="$deplib $compile_deplibs"
2320	finalize_deplibs="$deplib $finalize_deplibs"
2321	else
2322	newdlfiles="$newdlfiles $deplib"
2323	fi
2324	fi
2325	continue
2326	;;
2327	%DEPLIBS%)
2328	alldeplibs=yes
2329	continue
2330	;;
2331	esac # case $deplib
2332	if test "$found" = yes \|\| test -f "$lib"; then :
2333	else
2334	$echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
2335	exit $EXIT_FAILURE
2336	fi
2337
2338	# Check to see that this really is a libtool archive.
2339	if (${SED} -e '2q' $lib \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
2340	else
2341	$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
2342	exit $EXIT_FAILURE
2343	fi
2344
2345	ladir=`$echo "X$lib" \| $Xsed -e 's%/[^/]*$%%'`
2346	test "X$ladir" = "X$lib" && ladir="."
2347
2348	dlname=
2349	dlopen=
2350	dlpreopen=
2351	libdir=
2352	library_names=
2353	old_library=
2354	# If the library was installed with an old release of libtool,
2355	# it will not redefine variables installed, or shouldnotlink
2356	installed=yes
2357	shouldnotlink=no
2358	avoidtemprpath=
2359
2360
2361	# Read the .la file
2362	case $lib in
2363	/ \| \\) . $lib ;;
2364	*) . ./$lib ;;
2365	esac
2366
2367	if test "$linkmode,$pass" = "lib,link" \|\|
2368	test "$linkmode,$pass" = "prog,scan" \|\|
2369	{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
2370	test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
2371	test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
2372	fi
2373
2374	if test "$pass" = conv; then
2375	# Only check for convenience libraries
2376	deplibs="$lib $deplibs"
2377	if test -z "$libdir"; then
2378	if test -z "$old_library"; then
2379	$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2380	exit $EXIT_FAILURE
2381	fi
2382	# It is a libtool convenience library, so add in its objects.
2383	convenience="$convenience $ladir/$objdir/$old_library"
2384	old_convenience="$old_convenience $ladir/$objdir/$old_library"
2385	tmp_libs=
2386	for deplib in $dependency_libs; do
2387	deplibs="$deplib $deplibs"
2388	if test "X$duplicate_deps" = "Xyes" ; then
2389	case "$tmp_libs " in
2390	" $deplib ") specialdeplibs="$specialdeplibs $deplib" ;;
2391	esac
2392	fi
2393	tmp_libs="$tmp_libs $deplib"
2394	done
2395	elif test "$linkmode" != prog && test "$linkmode" != lib; then
2396	$echo "$modename: \`$lib' is not a convenience library" 1>&2
2397	exit $EXIT_FAILURE
2398	fi
2399	continue
2400	fi # $pass = conv
2401
2402
2403	# Get the name of the library we link against.
2404	linklib=
2405	for l in $old_library $library_names; do
2406	linklib="$l"
2407	done
2408	if test -z "$linklib"; then
2409	$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2410	exit $EXIT_FAILURE
2411	fi
2412
2413	# This library was specified with -dlopen.
2414	if test "$pass" = dlopen; then
2415	if test -z "$libdir"; then
2416	$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
2417	exit $EXIT_FAILURE
2418	fi
2419	if test -z "$dlname" \|\|
2420	test "$dlopen_support" != yes \|\|
2421	test "$build_libtool_libs" = no; then
2422	# If there is no dlname, no dlopen support or we're linking
2423	# statically, we need to preload. We also need to preload any
2424	# dependent libraries so libltdl's deplib preloader doesn't
2425	# bomb out in the load deplibs phase.
2426	dlprefiles="$dlprefiles $lib $dependency_libs"
2427	else
2428	newdlfiles="$newdlfiles $lib"
2429	fi
2430	continue
2431	fi # $pass = dlopen
2432
2433	# We need an absolute path.
2434	case $ladir in
2435	[\\/]* \| [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
2436	*)
2437	abs_ladir=`cd "$ladir" && pwd`
2438	if test -z "$abs_ladir"; then
2439	$echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
2440	$echo "$modename: passing it literally to the linker, although it might fail" 1>&2
2441	abs_ladir="$ladir"
2442	fi
2443	;;
2444	esac
2445	laname=`$echo "X$lib" \| $Xsed -e 's%^.*/%%'`
2446
2447	# Find the relevant object directory and library name.
2448	if test "X$installed" = Xyes; then
2449	if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
2450	$echo "$modename: warning: library \`$lib' was moved." 1>&2
2451	dir="$ladir"
2452	absdir="$abs_ladir"
2453	libdir="$abs_ladir"
2454	else
2455	dir="$libdir"
2456	absdir="$libdir"
2457	fi
2458	test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
2459	else
2460	if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
2461	dir="$ladir"
2462	absdir="$abs_ladir"
2463	# Remove this search path later
2464	notinst_path="$notinst_path $abs_ladir"
2465	else
2466	dir="$ladir/$objdir"
2467	absdir="$abs_ladir/$objdir"
2468	# Remove this search path later
2469	notinst_path="$notinst_path $abs_ladir"
2470	fi
2471	fi # $installed = yes
2472	name=`$echo "X$laname" \| $Xsed -e 's/\.la$//' -e 's/^lib//'`
2473
2474	# This library was specified with -dlpreopen.
2475	if test "$pass" = dlpreopen; then
2476	if test -z "$libdir"; then
2477	$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
2478	exit $EXIT_FAILURE
2479	fi
2480	# Prefer using a static library (so that no silly _DYNAMIC symbols
2481	# are required to link).
2482	if test -n "$old_library"; then
2483	newdlprefiles="$newdlprefiles $dir/$old_library"
2484	# Otherwise, use the dlname, so that lt_dlopen finds it.
2485	elif test -n "$dlname"; then
2486	newdlprefiles="$newdlprefiles $dir/$dlname"
2487	else
2488	newdlprefiles="$newdlprefiles $dir/$linklib"
2489	fi
2490	fi # $pass = dlpreopen
2491
2492	if test -z "$libdir"; then
2493	# Link the convenience library
2494	if test "$linkmode" = lib; then
2495	deplibs="$dir/$old_library $deplibs"
2496	elif test "$linkmode,$pass" = "prog,link"; then
2497	compile_deplibs="$dir/$old_library $compile_deplibs"
2498	finalize_deplibs="$dir/$old_library $finalize_deplibs"
2499	else
2500	deplibs="$lib $deplibs" # used for prog,scan pass
2501	fi
2502	continue
2503	fi
2504
2505
2506	if test "$linkmode" = prog && test "$pass" != link; then
2507	newlib_search_path="$newlib_search_path $ladir"
2508	deplibs="$lib $deplibs"
2509
2510	linkalldeplibs=no
2511	if test "$link_all_deplibs" != no \|\| test -z "$library_names" \|\|
2512	test "$build_libtool_libs" = no; then
2513	linkalldeplibs=yes
2514	fi
2515
2516	tmp_libs=
2517	for deplib in $dependency_libs; do
2518	case $deplib in
2519	-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" \| $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
2520	esac
2521	# Need to link against all dependency_libs?
2522	if test "$linkalldeplibs" = yes; then
2523	deplibs="$deplib $deplibs"
2524	else
2525	# Need to hardcode shared library paths
2526	# or/and link against static libraries
2527	newdependency_libs="$deplib $newdependency_libs"
2528	fi
2529	if test "X$duplicate_deps" = "Xyes" ; then
2530	case "$tmp_libs " in
2531	" $deplib ") specialdeplibs="$specialdeplibs $deplib" ;;
2532	esac
2533	fi
2534	tmp_libs="$tmp_libs $deplib"
2535	done # for deplib
2536	continue
2537	fi # $linkmode = prog...
2538
2539	if test "$linkmode,$pass" = "prog,link"; then
2540	if test -n "$library_names" &&
2541	{ test "$prefer_static_libs" = no \|\| test -z "$old_library"; }; then
2542	# We need to hardcode the library path
2543	if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
2544	# Make sure the rpath contains only unique directories.
2545	case "$temp_rpath " in
2546	" $dir ") ;;
2547	" $absdir ") ;;
2548	*) temp_rpath="$temp_rpath $absdir" ;;
2549	esac
2550	fi
2551
2552	# Hardcode the library path.
2553	# Skip directories that are in the system default run-time
2554	# search path.
2555	case " $sys_lib_dlsearch_path " in
2556	" $absdir ") ;;
2557	*)
2558	case "$compile_rpath " in
2559	" $absdir ") ;;
2560	*) compile_rpath="$compile_rpath $absdir"
2561	esac
2562	;;
2563	esac
2564	case " $sys_lib_dlsearch_path " in
2565	" $libdir ") ;;
2566	*)
2567	case "$finalize_rpath " in
2568	" $libdir ") ;;
2569	*) finalize_rpath="$finalize_rpath $libdir"
2570	esac
2571	;;
2572	esac
2573	fi # $linkmode,$pass = prog,link...
2574
2575	if test "$alldeplibs" = yes &&
2576	{ test "$deplibs_check_method" = pass_all \|\|
2577	{ test "$build_libtool_libs" = yes &&
2578	test -n "$library_names"; }; }; then
2579	# We only need to search for static libraries
2580	continue
2581	fi
2582	fi
2583
2584	link_static=no # Whether the deplib will be linked statically
2585	use_static_libs=$prefer_static_libs
2586	if test "$use_static_libs" = built && test "$installed" = yes ; then
2587	use_static_libs=no
2588	fi
2589	if test -n "$library_names" &&
2590	{ test "$use_static_libs" = no \|\| test -z "$old_library"; }; then
2591	if test "$installed" = no; then
2592	notinst_deplibs="$notinst_deplibs $lib"
2593	need_relink=yes
2594	fi
2595	# This is a shared library
2596
2597	# Warn about portability, can't link against -module's on
2598	# some systems (darwin)
2599	if test "$shouldnotlink" = yes && test "$pass" = link ; then
2600	$echo
2601	if test "$linkmode" = prog; then
2602	$echo "*** Warning: Linking the executable $output against the loadable module"
2603	else
2604	$echo "*** Warning: Linking the shared library $output against the loadable module"
2605	fi
2606	$echo "*** $linklib is not portable!"
2607	fi
2608	if test "$linkmode" = lib &&
2609	test "$hardcode_into_libs" = yes; then
2610	# Hardcode the library path.
2611	# Skip directories that are in the system default run-time
2612	# search path.
2613	case " $sys_lib_dlsearch_path " in
2614	" $absdir ") ;;
2615	*)
2616	case "$compile_rpath " in
2617	" $absdir ") ;;
2618	*) compile_rpath="$compile_rpath $absdir"
2619	esac
2620	;;
2621	esac
2622	case " $sys_lib_dlsearch_path " in
2623	" $libdir ") ;;
2624	*)
2625	case "$finalize_rpath " in
2626	" $libdir ") ;;
2627	*) finalize_rpath="$finalize_rpath $libdir"
2628	esac
2629	;;
2630	esac
2631	fi
2632
2633	if test -n "$old_archive_from_expsyms_cmds"; then
2634	# figure out the soname
2635	set dummy $library_names
2636	realname="$2"
2637	shift; shift
2638	libname=`eval \\$echo \"$libname_spec\"`
2639	# use dlname if we got it. it's perfectly good, no?
2640	if test -n "$dlname"; then
2641	soname="$dlname"
2642	elif test -n "$soname_spec"; then
2643	# bleh windows
2644	case $host in
2645	cygwin \| mingw*)
2646	major=`expr $current - $age`
2647	versuffix="-$major"
2648	;;
2649	esac
2650	eval soname=\"$soname_spec\"
2651	else
2652	soname="$realname"
2653	fi
2654
2655	# Make a new name for the extract_expsyms_cmds to use
2656	soroot="$soname"
2657	soname=`$echo $soroot \| ${SED} -e 's/^.*\///'`
2658	newlib="libimp-`$echo $soname \| ${SED} 's/^lib//;s/\.dll$//'`.a"
2659
2660	# If the library has no export list, then create one now
2661	if test -f "$output_objdir/$soname-def"; then :
2662	else
2663	$show "extracting exported symbol list from \`$soname'"
2664	save_ifs="$IFS"; IFS='~'
2665	cmds=$extract_expsyms_cmds
2666	for cmd in $cmds; do
2667	IFS="$save_ifs"
2668	eval cmd=\"$cmd\"
2669	$show "$cmd"
2670	$run eval "$cmd" \|\| exit $?
2671	done
2672	IFS="$save_ifs"
2673	fi
2674
2675	# Create $newlib
2676	if test -f "$output_objdir/$newlib"; then :; else
2677	$show "generating import library for \`$soname'"
2678	save_ifs="$IFS"; IFS='~'
2679	cmds=$old_archive_from_expsyms_cmds
2680	for cmd in $cmds; do
2681	IFS="$save_ifs"
2682	eval cmd=\"$cmd\"
2683	$show "$cmd"
2684	$run eval "$cmd" \|\| exit $?
2685	done
2686	IFS="$save_ifs"
2687	fi
2688	# make sure the library variables are pointing to the new library
2689	dir=$output_objdir
2690	linklib=$newlib
2691	fi # test -n "$old_archive_from_expsyms_cmds"
2692
2693	if test "$linkmode" = prog \|\| test "$mode" != relink; then
2694	add_shlibpath=
2695	add_dir=
2696	add=
2697	lib_linked=yes
2698	case $hardcode_action in
2699	immediate \| unsupported)
2700	if test "$hardcode_direct" = no; then
2701	add="$dir/$linklib"
2702	case $host in
2703	--sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
2704	--sysv4uw2) add_dir="-L$dir" ;;
2705	--sysv5OpenUNIX* \| --sysv5UnixWare7.[01].[10]* \| \
2706	--unixware7*) add_dir="-L$dir" ;;
2707	--darwin* )
2708	# if the lib is a module then we can not link against
2709	# it, someone is ignoring the new warnings I added
2710	if /usr/bin/file -L $add 2> /dev/null \|
2711	$EGREP ": [^:]* bundle" >/dev/null ; then
2712	$echo "** Warning, lib $linklib is a module, not a shared library"
2713	if test -z "$old_library" ; then
2714	$echo
2715	$echo "** And there doesn't seem to be a static archive available"
2716	$echo "** The link will probably fail, sorry"
2717	else
2718	add="$dir/$old_library"
2719	fi
2720	fi
2721	esac
2722	elif test "$hardcode_minus_L" = no; then
2723	case $host in
2724	--sunos*) add_shlibpath="$dir" ;;
2725	esac
2726	add_dir="-L$dir"
2727	add="-l$name"
2728	elif test "$hardcode_shlibpath_var" = no; then
2729	add_shlibpath="$dir"
2730	add="-l$name"
2731	else
2732	lib_linked=no
2733	fi
2734	;;
2735	relink)
2736	if test "$hardcode_direct" = yes; then
2737	add="$dir/$linklib"
2738	elif test "$hardcode_minus_L" = yes; then
2739	add_dir="-L$dir"
2740	# Try looking first in the location we're being installed to.
2741	if test -n "$inst_prefix_dir"; then
2742	case $libdir in
2743	[\\/]*)
2744	add_dir="$add_dir -L$inst_prefix_dir$libdir"
2745	;;
2746	esac
2747	fi
2748	add="-l$name"
2749	elif test "$hardcode_shlibpath_var" = yes; then
2750	add_shlibpath="$dir"
2751	add="-l$name"
2752	else
2753	lib_linked=no
2754	fi
2755	;;
2756	*) lib_linked=no ;;
2757	esac
2758
2759	if test "$lib_linked" != yes; then
2760	$echo "$modename: configuration error: unsupported hardcode properties"
2761	exit $EXIT_FAILURE
2762	fi
2763
2764	if test -n "$add_shlibpath"; then
2765	case :$compile_shlibpath: in
2766	":$add_shlibpath:") ;;
2767	*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
2768	esac
2769	fi
2770	if test "$linkmode" = prog; then
2771	test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
2772	test -n "$add" && compile_deplibs="$add $compile_deplibs"
2773	else
2774	test -n "$add_dir" && deplibs="$add_dir $deplibs"
2775	test -n "$add" && deplibs="$add $deplibs"
2776	if test "$hardcode_direct" != yes && \
2777	test "$hardcode_minus_L" != yes && \
2778	test "$hardcode_shlibpath_var" = yes; then
2779	case :$finalize_shlibpath: in
2780	":$libdir:") ;;
2781	*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2782	esac
2783	fi
2784	fi
2785	fi
2786
2787	if test "$linkmode" = prog \|\| test "$mode" = relink; then
2788	add_shlibpath=
2789	add_dir=
2790	add=
2791	# Finalize command for both is simple: just hardcode it.
2792	if test "$hardcode_direct" = yes; then
2793	add="$libdir/$linklib"
2794	elif test "$hardcode_minus_L" = yes; then
2795	add_dir="-L$libdir"
2796	add="-l$name"
2797	elif test "$hardcode_shlibpath_var" = yes; then
2798	case :$finalize_shlibpath: in
2799	":$libdir:") ;;
2800	*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2801	esac
2802	add="-l$name"
2803	elif test "$hardcode_automatic" = yes; then
2804	if test -n "$inst_prefix_dir" &&
2805	test -f "$inst_prefix_dir$libdir/$linklib" ; then
2806	add="$inst_prefix_dir$libdir/$linklib"
2807	else
2808	add="$libdir/$linklib"
2809	fi
2810	else
2811	# We cannot seem to hardcode it, guess we'll fake it.
2812	add_dir="-L$libdir"
2813	# Try looking first in the location we're being installed to.
2814	if test -n "$inst_prefix_dir"; then
2815	case $libdir in
2816	[\\/]*)
2817	add_dir="$add_dir -L$inst_prefix_dir$libdir"
2818	;;
2819	esac
2820	fi
2821	add="-l$name"
2822	fi
2823
2824	if test "$linkmode" = prog; then
2825	test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
2826	test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
2827	else
2828	test -n "$add_dir" && deplibs="$add_dir $deplibs"
2829	test -n "$add" && deplibs="$add $deplibs"
2830	fi
2831	fi
2832	elif test "$linkmode" = prog; then
2833	# Here we assume that one of hardcode_direct or hardcode_minus_L
2834	# is not unsupported. This is valid on all known static and
2835	# shared platforms.
2836	if test "$hardcode_direct" != unsupported; then
2837	test -n "$old_library" && linklib="$old_library"
2838	compile_deplibs="$dir/$linklib $compile_deplibs"
2839	finalize_deplibs="$dir/$linklib $finalize_deplibs"
2840	else
2841	compile_deplibs="-l$name -L$dir $compile_deplibs"
2842	finalize_deplibs="-l$name -L$dir $finalize_deplibs"
2843	fi
2844	elif test "$build_libtool_libs" = yes; then
2845	# Not a shared library
2846	if test "$deplibs_check_method" != pass_all; then
2847	# We're trying link a shared library against a static one
2848	# but the system doesn't support it.
2849
2850	# Just print a warning and add the library to dependency_libs so
2851	# that the program can be linked against the static library.
2852	$echo
2853	$echo "*** Warning: This system can not link to static lib archive $lib."
2854	$echo "*** I have the capability to make that library automatically link in when"
2855	$echo "*** you link to this library. But I can only do this if you have a"
2856	$echo "*** shared version of the library, which you do not appear to have."
2857	if test "$module" = yes; then
2858	$echo "*** But as you try to build a module library, libtool will still create "
2859	$echo "*** a static module, that should work as long as the dlopening application"
2860	$echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
2861	if test -z "$global_symbol_pipe"; then
2862	$echo
2863	$echo "*** However, this would only work if libtool was able to extract symbol"
2864	$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
2865	$echo "*** not find such a program. So, this module is probably useless."
2866	$echo "*** \`nm' from GNU binutils and a full rebuild may help."
2867	fi
2868	if test "$build_old_libs" = no; then
2869	build_libtool_libs=module
2870	build_old_libs=yes
2871	else
2872	build_libtool_libs=no
2873	fi
2874	fi
2875	else
2876	deplibs="$dir/$old_library $deplibs"
2877	link_static=yes
2878	fi
2879	fi # link shared/static library?
2880
2881	if test "$linkmode" = lib; then
2882	if test -n "$dependency_libs" &&
2883	{ test "$hardcode_into_libs" != yes \|\|
2884	test "$build_old_libs" = yes \|\|
2885	test "$link_static" = yes; }; then
2886	# Extract -R from dependency_libs
2887	temp_deplibs=
2888	for libdir in $dependency_libs; do
2889	case $libdir in
2890	-R*) temp_xrpath=`$echo "X$libdir" \| $Xsed -e 's/^-R//'`
2891	case " $xrpath " in
2892	" $temp_xrpath ") ;;
2893	*) xrpath="$xrpath $temp_xrpath";;
2894	esac;;
2895	*) temp_deplibs="$temp_deplibs $libdir";;
2896	esac
2897	done
2898	dependency_libs="$temp_deplibs"
2899	fi
2900
2901	newlib_search_path="$newlib_search_path $absdir"
2902	# Link against this library
2903	test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
2904	# ... and its dependency_libs
2905	tmp_libs=
2906	for deplib in $dependency_libs; do
2907	newdependency_libs="$deplib $newdependency_libs"
2908	if test "X$duplicate_deps" = "Xyes" ; then
2909	case "$tmp_libs " in
2910	" $deplib ") specialdeplibs="$specialdeplibs $deplib" ;;
2911	esac
2912	fi
2913	tmp_libs="$tmp_libs $deplib"
2914	done
2915
2916	if test "$link_all_deplibs" != no; then
2917	# Add the search paths of all dependency libraries
2918	for deplib in $dependency_libs; do
2919	case $deplib in
2920	-L*) path="$deplib" ;;
2921	*.la)
2922	dir=`$echo "X$deplib" \| $Xsed -e 's%/[^/]*$%%'`
2923	test "X$dir" = "X$deplib" && dir="."
2924	# We need an absolute path.
2925	case $dir in
2926	[\\/]* \| [A-Za-z]:[\\/]*) absdir="$dir" ;;
2927	*)
2928	absdir=`cd "$dir" && pwd`
2929	if test -z "$absdir"; then
2930	$echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
2931	absdir="$dir"
2932	fi
2933	;;
2934	esac
2935	if grep "^installed=no" $deplib > /dev/null; then
2936	path="$absdir/$objdir"
2937	else
2938	eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib`
2939	if test -z "$libdir"; then
2940	$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
2941	exit $EXIT_FAILURE
2942	fi
2943	if test "$absdir" != "$libdir"; then
2944	$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
2945	fi
2946	path="$absdir"
2947	fi
2948	depdepl=
2949	case $host in
2950	--darwin*)
2951	# we do not want to link against static libs,
2952	# but need to link against shared
2953	eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib`
2954	if test -n "$deplibrary_names" ; then
2955	for tmp in $deplibrary_names ; do
2956	depdepl=$tmp
2957	done
2958	if test -f "$path/$depdepl" ; then
2959	depdepl="$path/$depdepl"
2960	fi
2961	# do not add paths which are already there
2962	case " $newlib_search_path " in
2963	" $path ") ;;
2964	*) newlib_search_path="$newlib_search_path $path";;
2965	esac
2966	fi
2967	path=""
2968	;;
2969	*)
2970	path="-L$path"
2971	;;
2972	esac
2973	;;
2974	-l*)
2975	case $host in
2976	--darwin*)
2977	# Again, we only want to link against shared libraries
2978	eval tmp_libs=`$echo "X$deplib" \| $Xsed -e "s,^\-l,,"`
2979	for tmp in $newlib_search_path ; do
2980	if test -f "$tmp/lib$tmp_libs.dylib" ; then
2981	eval depdepl="$tmp/lib$tmp_libs.dylib"
2982	break
2983	fi
2984	done
2985	path=""
2986	;;
2987	*) continue ;;
2988	esac
2989	;;
2990	*) continue ;;
2991	esac
2992	case " $deplibs " in
2993	" $path ") ;;
2994	*) deplibs="$path $deplibs" ;;
2995	esac
2996	case " $deplibs " in
2997	" $depdepl ") ;;
2998	*) deplibs="$depdepl $deplibs" ;;
2999	esac
3000	done
3001	fi # link_all_deplibs != no
3002	fi # linkmode = lib
3003	done # for deplib in $libs
3004	dependency_libs="$newdependency_libs"
3005	if test "$pass" = dlpreopen; then
3006	# Link the dlpreopened libraries before other libraries
3007	for deplib in $save_deplibs; do
3008	deplibs="$deplib $deplibs"
3009	done
3010	fi
3011	if test "$pass" != dlopen; then
3012	if test "$pass" != conv; then
3013	# Make sure lib_search_path contains only unique directories.
3014	lib_search_path=
3015	for dir in $newlib_search_path; do
3016	case "$lib_search_path " in
3017	" $dir ") ;;
3018	*) lib_search_path="$lib_search_path $dir" ;;
3019	esac
3020	done
3021	newlib_search_path=
3022	fi
3023
3024	if test "$linkmode,$pass" != "prog,link"; then
3025	vars="deplibs"
3026	else
3027	vars="compile_deplibs finalize_deplibs"
3028	fi
3029	for var in $vars dependency_libs; do
3030	# Add libraries to $var in reverse order
3031	eval tmp_libs=\"\$$var\"
3032	new_libs=
3033	for deplib in $tmp_libs; do
3034	# FIXME: Pedantically, this is the right thing to do, so
3035	# that some nasty dependency loop isn't accidentally
3036	# broken:
3037	#new_libs="$deplib $new_libs"
3038	# Pragmatically, this seems to cause very few problems in
3039	# practice:
3040	case $deplib in
3041	-L*) new_libs="$deplib $new_libs" ;;
3042	-R*) ;;
3043	*)
3044	# And here is the reason: when a library appears more
3045	# than once as an explicit dependence of a library, or
3046	# is implicitly linked in more than once by the
3047	# compiler, it is considered special, and multiple
3048	# occurrences thereof are not removed. Compare this
3049	# with having the same library being listed as a
3050	# dependency of multiple other libraries: in this case,
3051	# we know (pedantically, we assume) the library does not
3052	# need to be listed more than once, so we keep only the
3053	# last copy. This is not always right, but it is rare
3054	# enough that we require users that really mean to play
3055	# such unportable linking tricks to link the library
3056	# using -Wl,-lname, so that libtool does not consider it
3057	# for duplicate removal.
3058	case " $specialdeplibs " in
3059	" $deplib ") new_libs="$deplib $new_libs" ;;
3060	*)
3061	case " $new_libs " in
3062	" $deplib ") ;;
3063	*) new_libs="$deplib $new_libs" ;;
3064	esac
3065	;;
3066	esac
3067	;;
3068	esac
3069	done
3070	tmp_libs=
3071	for deplib in $new_libs; do
3072	case $deplib in
3073	-L*)
3074	case " $tmp_libs " in
3075	" $deplib ") ;;
3076	*) tmp_libs="$tmp_libs $deplib" ;;
3077	esac
3078	;;
3079	*) tmp_libs="$tmp_libs $deplib" ;;
3080	esac
3081	done
3082	eval $var=\"$tmp_libs\"
3083	done # for var
3084	fi
3085	# Last step: remove runtime libs from dependency_libs
3086	# (they stay in deplibs)
3087	tmp_libs=
3088	for i in $dependency_libs ; do
3089	case " $predeps $postdeps $compiler_lib_search_path " in
3090	" $i ")
3091	i=""
3092	;;
3093	esac
3094	if test -n "$i" ; then
3095	tmp_libs="$tmp_libs $i"
3096	fi
3097	done
3098	dependency_libs=$tmp_libs
3099	done # for pass
3100	if test "$linkmode" = prog; then
3101	dlfiles="$newdlfiles"
3102	dlprefiles="$newdlprefiles"
3103	fi
3104
3105	case $linkmode in
3106	oldlib)
3107	if test -n "$deplibs"; then
3108	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
3109	fi
3110
3111	if test -n "$dlfiles$dlprefiles" \|\| test "$dlself" != no; then
3112	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
3113	fi
3114
3115	if test -n "$rpath"; then
3116	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
3117	fi
3118
3119	if test -n "$xrpath"; then
3120	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
3121	fi
3122
3123	if test -n "$vinfo"; then
3124	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
3125	fi
3126
3127	if test -n "$release"; then
3128	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
3129	fi
3130
3131	if test -n "$export_symbols" \|\| test -n "$export_symbols_regex"; then
3132	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
3133	fi
3134
3135	# Now set the variables for building old libraries.
3136	build_libtool_libs=no
3137	oldlibs="$output"
3138	objs="$objs$old_deplibs"
3139	;;
3140
3141	lib)
3142	# Make sure we only generate libraries of the form `libNAME.la'.
3143	case $outputname in
3144	lib*)
3145	name=`$echo "X$outputname" \| $Xsed -e 's/\.la$//' -e 's/^lib//'`
3146	eval shared_ext=\"$shrext_cmds\"
3147	eval libname=\"$libname_spec\"
3148	;;
3149	*)
3150	if test "$module" = no; then
3151	$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
3152	$echo "$help" 1>&2
3153	exit $EXIT_FAILURE
3154	fi
3155	if test "$need_lib_prefix" != no; then
3156	# Add the "lib" prefix for modules if required
3157	name=`$echo "X$outputname" \| $Xsed -e 's/\.la$//'`
3158	eval shared_ext=\"$shrext_cmds\"
3159	eval libname=\"$libname_spec\"
3160	else
3161	libname=`$echo "X$outputname" \| $Xsed -e 's/\.la$//'`
3162	fi
3163	;;
3164	esac
3165
3166	if test -n "$objs"; then
3167	if test "$deplibs_check_method" != pass_all; then
3168	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
3169	exit $EXIT_FAILURE
3170	else
3171	$echo
3172	$echo "*** Warning: Linking the shared library $output against the non-libtool"
3173	$echo "*** objects $objs is not portable!"
3174	libobjs="$libobjs $objs"
3175	fi
3176	fi
3177
3178	if test "$dlself" != no; then
3179	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
3180	fi
3181
3182	set dummy $rpath
3183	if test "$#" -gt 2; then
3184	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
3185	fi
3186	install_libdir="$2"
3187
3188	oldlibs=
3189	if test -z "$rpath"; then
3190	if test "$build_libtool_libs" = yes; then
3191	# Building a libtool convenience library.
3192	# Some compilers have problems with a `.al' extension so
3193	# convenience libraries should have the same extension an
3194	# archive normally would.
3195	oldlibs="$output_objdir/$libname.$libext $oldlibs"
3196	build_libtool_libs=convenience
3197	build_old_libs=yes
3198	fi
3199
3200	if test -n "$vinfo"; then
3201	$echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
3202	fi
3203
3204	if test -n "$release"; then
3205	$echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
3206	fi
3207	else
3208
3209	# Parse the version information argument.
3210	save_ifs="$IFS"; IFS=':'
3211	set dummy $vinfo 0 0 0
3212	IFS="$save_ifs"
3213
3214	if test -n "$8"; then
3215	$echo "$modename: too many parameters to \`-version-info'" 1>&2
3216	$echo "$help" 1>&2
3217	exit $EXIT_FAILURE
3218	fi
3219
3220	# convert absolute version numbers to libtool ages
3221	# this retains compatibility with .la files and attempts
3222	# to make the code below a bit more comprehensible
3223
3224	case $vinfo_number in
3225	yes)
3226	number_major="$2"
3227	number_minor="$3"
3228	number_revision="$4"
3229	#
3230	# There are really only two kinds -- those that
3231	# use the current revision as the major version
3232	# and those that subtract age and use age as
3233	# a minor version. But, then there is irix
3234	# which has an extra 1 added just for fun
3235	#
3236	case $version_type in
3237	darwin\|linux\|osf\|windows)
3238	current=`expr $number_major + $number_minor`
3239	age="$number_minor"
3240	revision="$number_revision"
3241	;;
3242	freebsd-aout\|freebsd-elf\|sunos)
3243	current="$number_major"
3244	revision="$number_minor"
3245	age="0"
3246	;;
3247	irix\|nonstopux)
3248	current=`expr $number_major + $number_minor - 1`
3249	age="$number_minor"
3250	revision="$number_minor"
3251	;;
3252	esac
3253	;;
3254	no)
3255	current="$2"
3256	revision="$3"
3257	age="$4"
3258	;;
3259	esac
3260
3261	# Check that each of the things are valid numbers.
3262	case $current in
3263	0\|[1-9]\|[1-9][0-9]\|[1-9][0-9][0-9]\|[1-9][0-9][0-9][0-9]\|[1-9][0-9][0-9][0-9][0-9]) ;;
3264	*)
3265	$echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
3266	$echo "$modename: \`$vinfo' is not valid version information" 1>&2
3267	exit $EXIT_FAILURE
3268	;;
3269	esac
3270
3271	case $revision in
3272	0\|[1-9]\|[1-9][0-9]\|[1-9][0-9][0-9]\|[1-9][0-9][0-9][0-9]\|[1-9][0-9][0-9][0-9][0-9]) ;;
3273	*)
3274	$echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
3275	$echo "$modename: \`$vinfo' is not valid version information" 1>&2
3276	exit $EXIT_FAILURE
3277	;;
3278	esac
3279
3280	case $age in
3281	0\|[1-9]\|[1-9][0-9]\|[1-9][0-9][0-9]\|[1-9][0-9][0-9][0-9]\|[1-9][0-9][0-9][0-9][0-9]) ;;
3282	*)
3283	$echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
3284	$echo "$modename: \`$vinfo' is not valid version information" 1>&2
3285	exit $EXIT_FAILURE
3286	;;
3287	esac
3288
3289	if test "$age" -gt "$current"; then
3290	$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
3291	$echo "$modename: \`$vinfo' is not valid version information" 1>&2
3292	exit $EXIT_FAILURE
3293	fi
3294
3295	# Calculate the version variables.
3296	major=
3297	versuffix=
3298	verstring=
3299	case $version_type in
3300	none) ;;
3301
3302	darwin)
3303	# Like Linux, but with the current version available in
3304	# verstring for coding it into the library header
3305	major=.`expr $current - $age`
3306	versuffix="$major.$age.$revision"
3307	# Darwin ld doesn't like 0 for these options...
3308	minor_current=`expr $current + 1`
3309	verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
3310	;;
3311
3312	freebsd-aout)
3313	major=".$current"
3314	versuffix=".$current.$revision";
3315	;;
3316
3317	freebsd-elf)
3318	major=".$current"
3319	versuffix=".$current";
3320	;;
3321
3322	irix \| nonstopux)
3323	major=`expr $current - $age + 1`
3324
3325	case $version_type in
3326	nonstopux) verstring_prefix=nonstopux ;;
3327	*) verstring_prefix=sgi ;;
3328	esac
3329	verstring="$verstring_prefix$major.$revision"
3330
3331	# Add in all the interfaces that we are compatible with.
3332	loop=$revision
3333	while test "$loop" -ne 0; do
3334	iface=`expr $revision - $loop`
3335	loop=`expr $loop - 1`
3336	verstring="$verstring_prefix$major.$iface:$verstring"
3337	done
3338
3339	# Before this point, $major must not contain `.'.
3340	major=.$major
3341	versuffix="$major.$revision"
3342	;;
3343
3344	linux)
3345	major=.`expr $current - $age`
3346	versuffix="$major.$age.$revision"
3347	;;
3348
3349	osf)
3350	major=.`expr $current - $age`
3351	versuffix=".$current.$age.$revision"
3352	verstring="$current.$age.$revision"
3353
3354	# Add in all the interfaces that we are compatible with.
3355	loop=$age
3356	while test "$loop" -ne 0; do
3357	iface=`expr $current - $loop`
3358	loop=`expr $loop - 1`
3359	verstring="$verstring:${iface}.0"
3360	done
3361
3362	# Make executables depend on our current version.
3363	verstring="$verstring:${current}.0"
3364	;;
3365
3366	sunos)
3367	major=".$current"
3368	versuffix=".$current.$revision"
3369	;;
3370
3371	windows)
3372	# Use '-' rather than '.', since we only want one
3373	# extension on DOS 8.3 filesystems.
3374	major=`expr $current - $age`
3375	versuffix="-$major"
3376	;;
3377
3378	*)
3379	$echo "$modename: unknown library version type \`$version_type'" 1>&2
3380	$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
3381	exit $EXIT_FAILURE
3382	;;
3383	esac
3384
3385	# Clear the version info if we defaulted, and they specified a release.
3386	if test -z "$vinfo" && test -n "$release"; then
3387	major=
3388	case $version_type in
3389	darwin)
3390	# we can't check for "0.0" in archive_cmds due to quoting
3391	# problems, so we reset it completely
3392	verstring=
3393	;;
3394	*)
3395	verstring="0.0"
3396	;;
3397	esac
3398	if test "$need_version" = no; then
3399	versuffix=
3400	else
3401	versuffix=".0.0"
3402	fi
3403	fi
3404
3405	# Remove version info from name if versioning should be avoided
3406	if test "$avoid_version" = yes && test "$need_version" = no; then
3407	major=
3408	versuffix=
3409	verstring=""
3410	fi
3411
3412	# Check to see if the archive will have undefined symbols.
3413	if test "$allow_undefined" = yes; then
3414	if test "$allow_undefined_flag" = unsupported; then
3415	$echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
3416	build_libtool_libs=no
3417	build_old_libs=yes
3418	fi
3419	else
3420	# Don't allow undefined symbols.
3421	allow_undefined_flag="$no_undefined_flag"
3422	fi
3423	fi
3424
3425	if test "$mode" != relink; then
3426	# Remove our outputs, but don't remove object files since they
3427	# may have been created when compiling PIC objects.
3428	removelist=
3429	tempremovelist=`$echo "$output_objdir/*"`
3430	for p in $tempremovelist; do
3431	case $p in
3432	*.$objext)
3433	;;
3434	$output_objdir/$outputname \| $output_objdir/$libname.* \| $output_objdir/${libname}${release}.*)
3435	if test "X$precious_files_regex" != "X"; then
3436	if echo $p \| $EGREP -e "$precious_files_regex" >/dev/null 2>&1
3437	then
3438	continue
3439	fi
3440	fi
3441	removelist="$removelist $p"
3442	;;
3443	*) ;;
3444	esac
3445	done
3446	if test -n "$removelist"; then
3447	$show "${rm}r $removelist"
3448	$run ${rm}r $removelist
3449	fi
3450	fi
3451
3452	# Now set the variables for building old libraries.
3453	if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
3454	oldlibs="$oldlibs $output_objdir/$libname.$libext"
3455
3456	# Transform .lo files to .o files.
3457	oldobjs="$objs "`$echo "X$libobjs" \| $SP2NL \| $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" \| $NL2SP`
3458	fi
3459
3460	# Eliminate all temporary directories.
3461	for path in $notinst_path; do
3462	lib_search_path=`$echo "$lib_search_path " \| ${SED} -e "s% $path % %g"`
3463	deplibs=`$echo "$deplibs " \| ${SED} -e "s% -L$path % %g"`
3464	dependency_libs=`$echo "$dependency_libs " \| ${SED} -e "s% -L$path % %g"`
3465	done
3466
3467	if test -n "$xrpath"; then
3468	# If the user specified any rpath flags, then add them.
3469	temp_xrpath=
3470	for libdir in $xrpath; do
3471	temp_xrpath="$temp_xrpath -R$libdir"
3472	case "$finalize_rpath " in
3473	" $libdir ") ;;
3474	*) finalize_rpath="$finalize_rpath $libdir" ;;
3475	esac
3476	done
3477	if test "$hardcode_into_libs" != yes \|\| test "$build_old_libs" = yes; then
3478	dependency_libs="$temp_xrpath $dependency_libs"
3479	fi
3480	fi
3481
3482	# Make sure dlfiles contains only unique files that won't be dlpreopened
3483	old_dlfiles="$dlfiles"
3484	dlfiles=
3485	for lib in $old_dlfiles; do
3486	case " $dlprefiles $dlfiles " in
3487	" $lib ") ;;
3488	*) dlfiles="$dlfiles $lib" ;;
3489	esac
3490	done
3491
3492	# Make sure dlprefiles contains only unique files
3493	old_dlprefiles="$dlprefiles"
3494	dlprefiles=
3495	for lib in $old_dlprefiles; do
3496	case "$dlprefiles " in
3497	" $lib ") ;;
3498	*) dlprefiles="$dlprefiles $lib" ;;
3499	esac
3500	done
3501
3502	if test "$build_libtool_libs" = yes; then
3503	if test -n "$rpath"; then
3504	case $host in
3505	--cygwin* \| --mingw* \| --pw32* \| --os2* \| --beos*)
3506	# these systems don't actually have a c library (as such)!
3507	;;
3508	--rhapsody* \| --darwin1.[012])
3509	# Rhapsody C library is in the System framework
3510	deplibs="$deplibs -framework System"
3511	;;
3512	--netbsd*)
3513	# Don't link with libc until the a.out ld.so is fixed.
3514	;;
3515	--openbsd* \| --freebsd* \| --dragonfly*)
3516	# Do not include libc due to us having libc/libc_r.
3517	;;
3518	--sco3.2v5* \| --sco5v6*)
3519	# Causes problems with __ctype
3520	;;
3521	--sysv4.2uw2* \| --sysv5* \| --unixware* \| --OpenUNIX*)
3522	# Compiler inserts libc in the correct place for threads to work
3523	;;
3524	*)
3525	# Add libc to deplibs on all other systems if necessary.
3526	if test "$build_libtool_need_lc" = "yes"; then
3527	deplibs="$deplibs -lc"
3528	fi
3529	;;
3530	esac
3531	fi
3532
3533	# Transform deplibs into only deplibs that can be linked in shared.
3534	name_save=$name
3535	libname_save=$libname
3536	release_save=$release
3537	versuffix_save=$versuffix
3538	major_save=$major
3539	# I'm not sure if I'm treating the release correctly. I think
3540	# release should show up in the -l (ie -lgmp5) so we don't want to
3541	# add it in twice. Is that correct?
3542	release=""
3543	versuffix=""
3544	major=""
3545	newdeplibs=
3546	droppeddeps=no
3547	case $deplibs_check_method in
3548	pass_all)
3549	# Don't check for shared/static. Everything works.
3550	# This might be a little naive. We might want to check
3551	# whether the library exists or not. But this is on
3552	# osf3 & osf4 and I'm not really sure... Just
3553	# implementing what was already the behavior.
3554	newdeplibs=$deplibs
3555	;;
3556	test_compile)
3557	# This code stresses the "libraries are programs" paradigm to its
3558	# limits. Maybe even breaks it. We compile a program, linking it
3559	# against the deplibs as a proxy for the library. Then we can check
3560	# whether they linked in statically or dynamically with ldd.
3561	$rm conftest.c
3562	cat > conftest.c <<EOF
3563	int main() { return 0; }
3564	EOF
3565	$rm conftest
3566	$LTCC $LTCFLAGS -o conftest conftest.c $deplibs
3567	if test "$?" -eq 0 ; then
3568	ldd_output=`ldd conftest`
3569	for i in $deplibs; do
3570	name=`expr $i : '-l$.*$'`
3571	# If $name is empty we are operating on a -L argument.
3572	if test "$name" != "" && test "$name" -ne "0"; then
3573	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3574	case " $predeps $postdeps " in
3575	" $i ")
3576	newdeplibs="$newdeplibs $i"
3577	i=""
3578	;;
3579	esac
3580	fi
3581	if test -n "$i" ; then
3582	libname=`eval \\$echo \"$libname_spec\"`
3583	deplib_matches=`eval \\$echo \"$library_names_spec\"`
3584	set dummy $deplib_matches
3585	deplib_match=$2
3586	if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3587	newdeplibs="$newdeplibs $i"
3588	else
3589	droppeddeps=yes
3590	$echo
3591	$echo "*** Warning: dynamic linker does not accept needed library $i."
3592	$echo "*** I have the capability to make that library automatically link in when"
3593	$echo "*** you link to this library. But I can only do this if you have a"
3594	$echo "*** shared version of the library, which I believe you do not have"
3595	$echo "*** because a test_compile did reveal that the linker did not use it for"
3596	$echo "*** its dynamic dependency list that programs get resolved with at runtime."
3597	fi
3598	fi
3599	else
3600	newdeplibs="$newdeplibs $i"
3601	fi
3602	done
3603	else
3604	# Error occurred in the first compile. Let's try to salvage
3605	# the situation: Compile a separate program for each library.
3606	for i in $deplibs; do
3607	name=`expr $i : '-l$.*$'`
3608	# If $name is empty we are operating on a -L argument.
3609	if test "$name" != "" && test "$name" != "0"; then
3610	$rm conftest
3611	$LTCC $LTCFLAGS -o conftest conftest.c $i
3612	# Did it work?
3613	if test "$?" -eq 0 ; then
3614	ldd_output=`ldd conftest`
3615	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3616	case " $predeps $postdeps " in
3617	" $i ")
3618	newdeplibs="$newdeplibs $i"
3619	i=""
3620	;;
3621	esac
3622	fi
3623	if test -n "$i" ; then
3624	libname=`eval \\$echo \"$libname_spec\"`
3625	deplib_matches=`eval \\$echo \"$library_names_spec\"`
3626	set dummy $deplib_matches
3627	deplib_match=$2
3628	if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3629	newdeplibs="$newdeplibs $i"
3630	else
3631	droppeddeps=yes
3632	$echo
3633	$echo "*** Warning: dynamic linker does not accept needed library $i."
3634	$echo "*** I have the capability to make that library automatically link in when"
3635	$echo "*** you link to this library. But I can only do this if you have a"
3636	$echo "*** shared version of the library, which you do not appear to have"
3637	$echo "*** because a test_compile did reveal that the linker did not use this one"
3638	$echo "*** as a dynamic dependency that programs can get resolved with at runtime."
3639	fi
3640	fi
3641	else
3642	droppeddeps=yes
3643	$echo
3644	$echo "*** Warning! Library $i is needed by this library but I was not able to"
3645	$echo "*** make it link in! You will probably need to install it or some"
3646	$echo "*** library that it depends on before this library will be fully"
3647	$echo "*** functional. Installing it before continuing would be even better."
3648	fi
3649	else
3650	newdeplibs="$newdeplibs $i"
3651	fi
3652	done
3653	fi
3654	;;
3655	file_magic*)
3656	set dummy $deplibs_check_method
3657	file_magic_regex=`expr "$deplibs_check_method" : "$2 $.*$"`
3658	for a_deplib in $deplibs; do
3659	name=`expr $a_deplib : '-l$.*$'`
3660	# If $name is empty we are operating on a -L argument.
3661	if test "$name" != "" && test "$name" != "0"; then
3662	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3663	case " $predeps $postdeps " in
3664	" $a_deplib ")
3665	newdeplibs="$newdeplibs $a_deplib"
3666	a_deplib=""
3667	;;
3668	esac
3669	fi
3670	if test -n "$a_deplib" ; then
3671	libname=`eval \\$echo \"$libname_spec\"`
3672	for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3673	potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3674	for potent_lib in $potential_libs; do
3675	# Follow soft links.
3676	if ls -lLd "$potent_lib" 2>/dev/null \
3677	\| grep " -> " >/dev/null; then
3678	continue
3679	fi
3680	# The statement above tries to avoid entering an
3681	# endless loop below, in case of cyclic links.
3682	# We might still enter an endless loop, since a link
3683	# loop can be closed while we follow links,
3684	# but so what?
3685	potlib="$potent_lib"
3686	while test -h "$potlib" 2>/dev/null; do
3687	potliblink=`ls -ld $potlib \| ${SED} 's/.* -> //'`
3688	case $potliblink in
3689	[\\/]* \| [A-Za-z]:[\\/]*) potlib="$potliblink";;
3690	) potlib=`$echo "X$potlib" \| $Xsed -e 's,[^/]$,,'`"$potliblink";;
3691	esac
3692	done
3693	# It is ok to link against an archive when
3694	# building a shared library.
3695	if $AR -t $potlib > /dev/null 2>&1; then
3696	newdeplibs="$newdeplibs $a_deplib"
3697	a_deplib=""
3698	break 2
3699	fi
3700	if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
3701	\| ${SED} 10q \
3702	\| $EGREP "$file_magic_regex" > /dev/null; then
3703	newdeplibs="$newdeplibs $a_deplib"
3704	a_deplib=""
3705	break 2
3706	fi
3707	done
3708	done
3709	fi
3710	if test -n "$a_deplib" ; then
3711	droppeddeps=yes
3712	$echo
3713	$echo "*** Warning: linker path does not have real file for library $a_deplib."
3714	$echo "*** I have the capability to make that library automatically link in when"
3715	$echo "*** you link to this library. But I can only do this if you have a"
3716	$echo "*** shared version of the library, which you do not appear to have"
3717	$echo "*** because I did check the linker path looking for a file starting"
3718	if test -z "$potlib" ; then
3719	$echo "*** with $libname but no candidates were found. (...for file magic test)"
3720	else
3721	$echo "*** with $libname and none of the candidates passed a file format test"
3722	$echo "*** using a file magic. Last file checked: $potlib"
3723	fi
3724	fi
3725	else
3726	# Add a -L argument.
3727	newdeplibs="$newdeplibs $a_deplib"
3728	fi
3729	done # Gone through all deplibs.
3730	;;
3731	match_pattern*)
3732	set dummy $deplibs_check_method
3733	match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"`
3734	for a_deplib in $deplibs; do
3735	name=`expr $a_deplib : '-l$.*$'`
3736	# If $name is empty we are operating on a -L argument.
3737	if test -n "$name" && test "$name" != "0"; then
3738	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3739	case " $predeps $postdeps " in
3740	" $a_deplib ")
3741	newdeplibs="$newdeplibs $a_deplib"
3742	a_deplib=""
3743	;;
3744	esac
3745	fi
3746	if test -n "$a_deplib" ; then
3747	libname=`eval \\$echo \"$libname_spec\"`
3748	for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3749	potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3750	for potent_lib in $potential_libs; do
3751	potlib="$potent_lib" # see symlink-check above in file_magic test
3752	if eval $echo \"$potent_lib\" 2>/dev/null \
3753	\| ${SED} 10q \
3754	\| $EGREP "$match_pattern_regex" > /dev/null; then
3755	newdeplibs="$newdeplibs $a_deplib"
3756	a_deplib=""
3757	break 2
3758	fi
3759	done
3760	done
3761	fi
3762	if test -n "$a_deplib" ; then
3763	droppeddeps=yes
3764	$echo
3765	$echo "*** Warning: linker path does not have real file for library $a_deplib."
3766	$echo "*** I have the capability to make that library automatically link in when"
3767	$echo "*** you link to this library. But I can only do this if you have a"
3768	$echo "*** shared version of the library, which you do not appear to have"
3769	$echo "*** because I did check the linker path looking for a file starting"
3770	if test -z "$potlib" ; then
3771	$echo "*** with $libname but no candidates were found. (...for regex pattern test)"
3772	else
3773	$echo "*** with $libname and none of the candidates passed a file format test"
3774	$echo "*** using a regex pattern. Last file checked: $potlib"
3775	fi
3776	fi
3777	else
3778	# Add a -L argument.
3779	newdeplibs="$newdeplibs $a_deplib"
3780	fi
3781	done # Gone through all deplibs.
3782	;;
3783	none \| unknown \| *)
3784	newdeplibs=""
3785	tmp_deplibs=`$echo "X $deplibs" \| $Xsed -e 's/ -lc$//' \
3786	-e 's/ -[LR][^ ]*//g'`
3787	if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3788	for i in $predeps $postdeps ; do
3789	# can't use Xsed below, because $i might contain '/'
3790	tmp_deplibs=`$echo "X $tmp_deplibs" \| ${SED} -e "1s,^X,," -e "s,$i,,"`
3791	done
3792	fi
3793	if $echo "X $tmp_deplibs" \| $Xsed -e 's/[ ]//g' \
3794	\| grep . >/dev/null; then
3795	$echo
3796	if test "X$deplibs_check_method" = "Xnone"; then
3797	$echo "*** Warning: inter-library dependencies are not supported in this platform."
3798	else
3799	$echo "*** Warning: inter-library dependencies are not known to be supported."
3800	fi
3801	$echo "*** All declared inter-library dependencies are being dropped."
3802	droppeddeps=yes
3803	fi
3804	;;
3805	esac
3806	versuffix=$versuffix_save
3807	major=$major_save
3808	release=$release_save
3809	libname=$libname_save
3810	name=$name_save
3811
3812	case $host in
3813	--rhapsody* \| --darwin1.[012])
3814	# On Rhapsody replace the C library is the System framework
3815	newdeplibs=`$echo "X $newdeplibs" \| $Xsed -e 's/ -lc / -framework System /'`
3816	;;
3817	esac
3818
3819	if test "$droppeddeps" = yes; then
3820	if test "$module" = yes; then
3821	$echo
3822	$echo "*** Warning: libtool could not satisfy all declared inter-library"
3823	$echo "*** dependencies of module $libname. Therefore, libtool will create"
3824	$echo "*** a static module, that should work as long as the dlopening"
3825	$echo "*** application is linked with the -dlopen flag."
3826	if test -z "$global_symbol_pipe"; then
3827	$echo
3828	$echo "*** However, this would only work if libtool was able to extract symbol"
3829	$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
3830	$echo "*** not find such a program. So, this module is probably useless."
3831	$echo "*** \`nm' from GNU binutils and a full rebuild may help."
3832	fi
3833	if test "$build_old_libs" = no; then
3834	oldlibs="$output_objdir/$libname.$libext"
3835	build_libtool_libs=module
3836	build_old_libs=yes
3837	else
3838	build_libtool_libs=no
3839	fi
3840	else
3841	$echo "*** The inter-library dependencies that have been dropped here will be"
3842	$echo "*** automatically added whenever a program is linked with this library"
3843	$echo "*** or is declared to -dlopen it."
3844
3845	if test "$allow_undefined" = no; then
3846	$echo
3847	$echo "*** Since this library must not contain undefined symbols,"
3848	$echo "*** because either the platform does not support them or"
3849	$echo "*** it was explicitly requested with -no-undefined,"
3850	$echo "*** libtool will only create a static version of it."
3851	if test "$build_old_libs" = no; then
3852	oldlibs="$output_objdir/$libname.$libext"
3853	build_libtool_libs=module
3854	build_old_libs=yes
3855	else
3856	build_libtool_libs=no
3857	fi
3858	fi
3859	fi
3860	fi
3861	# Done checking deplibs!
3862	deplibs=$newdeplibs
3863	fi
3864
3865
3866	# move library search paths that coincide with paths to not yet
3867	# installed libraries to the beginning of the library search list
3868	new_libs=
3869	for path in $notinst_path; do
3870	case " $new_libs " in
3871	" -L$path/$objdir ") ;;
3872	*)
3873	case " $deplibs " in
3874	" -L$path/$objdir ")
3875	new_libs="$new_libs -L$path/$objdir" ;;
3876	esac
3877	;;
3878	esac
3879	done
3880	for deplib in $deplibs; do
3881	case $deplib in
3882	-L*)
3883	case " $new_libs " in
3884	" $deplib ") ;;
3885	*) new_libs="$new_libs $deplib" ;;
3886	esac
3887	;;
3888	*) new_libs="$new_libs $deplib" ;;
3889	esac
3890	done
3891	deplibs="$new_libs"
3892
3893
3894	# All the library-specific variables (install_libdir is set above).
3895	library_names=
3896	old_library=
3897	dlname=
3898
3899	# Test again, we may have decided not to build it any more
3900	if test "$build_libtool_libs" = yes; then
3901	if test "$hardcode_into_libs" = yes; then
3902	# Hardcode the library paths
3903	hardcode_libdirs=
3904	dep_rpath=
3905	rpath="$finalize_rpath"
3906	test "$mode" != relink && rpath="$compile_rpath$rpath"
3907	for libdir in $rpath; do
3908	if test -n "$hardcode_libdir_flag_spec"; then
3909	if test -n "$hardcode_libdir_separator"; then
3910	if test -z "$hardcode_libdirs"; then
3911	hardcode_libdirs="$libdir"
3912	else
3913	# Just accumulate the unique libdirs.
3914	case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
3915	"$hardcode_libdir_separator$libdir$hardcode_libdir_separator")
3916	;;
3917	*)
3918	hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
3919	;;
3920	esac
3921	fi
3922	else
3923	eval flag=\"$hardcode_libdir_flag_spec\"
3924	dep_rpath="$dep_rpath $flag"
3925	fi
3926	elif test -n "$runpath_var"; then
3927	case "$perm_rpath " in
3928	" $libdir ") ;;
3929	*) perm_rpath="$perm_rpath $libdir" ;;
3930	esac
3931	fi
3932	done
3933	# Substitute the hardcoded libdirs into the rpath.
3934	if test -n "$hardcode_libdir_separator" &&
3935	test -n "$hardcode_libdirs"; then
3936	libdir="$hardcode_libdirs"
3937	if test -n "$hardcode_libdir_flag_spec_ld"; then
3938	eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
3939	else
3940	eval dep_rpath=\"$hardcode_libdir_flag_spec\"
3941	fi
3942	fi
3943	if test -n "$runpath_var" && test -n "$perm_rpath"; then
3944	# We should set the runpath_var.
3945	rpath=
3946	for dir in $perm_rpath; do
3947	rpath="$rpath$dir:"
3948	done
3949	eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
3950	fi
3951	test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
3952	fi
3953
3954	shlibpath="$finalize_shlibpath"
3955	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
3956	if test -n "$shlibpath"; then
3957	eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
3958	fi
3959
3960	# Get the real and link names of the library.
3961	eval shared_ext=\"$shrext_cmds\"
3962	eval library_names=\"$library_names_spec\"
3963	set dummy $library_names
3964	realname="$2"
3965	shift; shift
3966
3967	if test -n "$soname_spec"; then
3968	eval soname=\"$soname_spec\"
3969	else
3970	soname="$realname"
3971	fi
3972	if test -z "$dlname"; then
3973	dlname=$soname
3974	fi
3975
3976	lib="$output_objdir/$realname"
3977	linknames=
3978	for link
3979	do
3980	linknames="$linknames $link"
3981	done
3982
3983	# Use standard objects if they are pic
3984	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" \| $SP2NL \| $Xsed -e "$lo2o" \| $NL2SP`
3985
3986	# Prepare the list of exported symbols
3987	if test -z "$export_symbols"; then
3988	if test "$always_export_symbols" = yes \|\| test -n "$export_symbols_regex"; then
3989	$show "generating symbol list for \`$libname.la'"
3990	export_symbols="$output_objdir/$libname.exp"
3991	$run $rm $export_symbols
3992	cmds=$export_symbols_cmds
3993	save_ifs="$IFS"; IFS='~'
3994	for cmd in $cmds; do
3995	IFS="$save_ifs"
3996	eval cmd=\"$cmd\"
3997	if len=`expr "X$cmd" : ".*"` &&
3998	test "$len" -le "$max_cmd_len" \|\| test "$max_cmd_len" -le -1; then
3999	$show "$cmd"
4000	$run eval "$cmd" \|\| exit $?
4001	skipped_export=false
4002	else
4003	# The command line is too long to execute in one step.
4004	$show "using reloadable object file for export list..."
4005	skipped_export=:
4006	# Break out early, otherwise skipped_export may be
4007	# set to false by a later but shorter cmd.
4008	break
4009	fi
4010	done
4011	IFS="$save_ifs"
4012	if test -n "$export_symbols_regex"; then
4013	$show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
4014	$run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
4015	$show "$mv \"${export_symbols}T\" \"$export_symbols\""
4016	$run eval '$mv "${export_symbols}T" "$export_symbols"'
4017	fi
4018	fi
4019	fi
4020
4021	if test -n "$export_symbols" && test -n "$include_expsyms"; then
4022	$run eval '$echo "X$include_expsyms" \| $SP2NL >> "$export_symbols"'
4023	fi
4024
4025	tmp_deplibs=
4026	for test_deplib in $deplibs; do
4027	case " $convenience " in
4028	" $test_deplib ") ;;
4029	*)
4030	tmp_deplibs="$tmp_deplibs $test_deplib"
4031	;;
4032	esac
4033	done
4034	deplibs="$tmp_deplibs"
4035
4036	if test -n "$convenience"; then
4037	if test -n "$whole_archive_flag_spec"; then
4038	save_libobjs=$libobjs
4039	eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
4040	else
4041	gentop="$output_objdir/${outputname}x"
4042	generated="$generated $gentop"
4043
4044	func_extract_archives $gentop $convenience
4045	libobjs="$libobjs $func_extract_archives_result"
4046	fi
4047	fi
4048
4049	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
4050	eval flag=\"$thread_safe_flag_spec\"
4051	linker_flags="$linker_flags $flag"
4052	fi
4053
4054	# Make a backup of the uninstalled library when relinking
4055	if test "$mode" = relink; then
4056	$run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' \|\| exit $?
4057	fi
4058
4059	# Do each of the archive commands.
4060	if test "$module" = yes && test -n "$module_cmds" ; then
4061	if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
4062	eval test_cmds=\"$module_expsym_cmds\"
4063	cmds=$module_expsym_cmds
4064	else
4065	eval test_cmds=\"$module_cmds\"
4066	cmds=$module_cmds
4067	fi
4068	else
4069	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
4070	eval test_cmds=\"$archive_expsym_cmds\"
4071	cmds=$archive_expsym_cmds
4072	else
4073	eval test_cmds=\"$archive_cmds\"
4074	cmds=$archive_cmds
4075	fi
4076	fi
4077
4078	if test "X$skipped_export" != "X:" &&
4079	len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
4080	test "$len" -le "$max_cmd_len" \|\| test "$max_cmd_len" -le -1; then
4081	:
4082	else
4083	# The command line is too long to link in one step, link piecewise.
4084	$echo "creating reloadable object files..."
4085
4086	# Save the value of $output and $libobjs because we want to
4087	# use them later. If we have whole_archive_flag_spec, we
4088	# want to use save_libobjs as it was before
4089	# whole_archive_flag_spec was expanded, because we can't
4090	# assume the linker understands whole_archive_flag_spec.
4091	# This may have to be revisited, in case too many
4092	# convenience libraries get linked in and end up exceeding
4093	# the spec.
4094	if test -z "$convenience" \|\| test -z "$whole_archive_flag_spec"; then
4095	save_libobjs=$libobjs
4096	fi
4097	save_output=$output
4098	output_la=`$echo "X$output" \| $Xsed -e "$basename"`
4099
4100	# Clear the reloadable object creation command queue and
4101	# initialize k to one.
4102	test_cmds=
4103	concat_cmds=
4104	objlist=
4105	delfiles=
4106	last_robj=
4107	k=1
4108	output=$output_objdir/$output_la-${k}.$objext
4109	# Loop over the list of objects to be linked.
4110	for obj in $save_libobjs
4111	do
4112	eval test_cmds=\"$reload_cmds $objlist $last_robj\"
4113	if test "X$objlist" = X \|\|
4114	{ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
4115	test "$len" -le "$max_cmd_len"; }; then
4116	objlist="$objlist $obj"
4117	else
4118	# The command $test_cmds is almost too long, add a
4119	# command to the queue.
4120	if test "$k" -eq 1 ; then
4121	# The first file doesn't have a previous command to add.
4122	eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
4123	else
4124	# All subsequent reloadable object files will link in
4125	# the last one created.
4126	eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
4127	fi
4128	last_robj=$output_objdir/$output_la-${k}.$objext
4129	k=`expr $k + 1`
4130	output=$output_objdir/$output_la-${k}.$objext
4131	objlist=$obj
4132	len=1
4133	fi
4134	done
4135	# Handle the remaining objects by creating one last
4136	# reloadable object file. All subsequent reloadable object
4137	# files will link in the last one created.
4138	test -z "$concat_cmds" \|\| concat_cmds=$concat_cmds~
4139	eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
4140
4141	if ${skipped_export-false}; then
4142	$show "generating symbol list for \`$libname.la'"
4143	export_symbols="$output_objdir/$libname.exp"
4144	$run $rm $export_symbols
4145	libobjs=$output
4146	# Append the command to create the export file.
4147	eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
4148	fi
4149
4150	# Set up a command to remove the reloadable object files
4151	# after they are used.
4152	i=0
4153	while test "$i" -lt "$k"
4154	do
4155	i=`expr $i + 1`
4156	delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
4157	done
4158
4159	$echo "creating a temporary reloadable object file: $output"
4160
4161	# Loop through the commands generated above and execute them.
4162	save_ifs="$IFS"; IFS='~'
4163	for cmd in $concat_cmds; do
4164	IFS="$save_ifs"
4165	$show "$cmd"
4166	$run eval "$cmd" \|\| exit $?
4167	done
4168	IFS="$save_ifs"
4169
4170	libobjs=$output
4171	# Restore the value of output.
4172	output=$save_output
4173
4174	if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
4175	eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
4176	fi
4177	# Expand the library linking commands again to reset the
4178	# value of $libobjs for piecewise linking.
4179
4180	# Do each of the archive commands.
4181	if test "$module" = yes && test -n "$module_cmds" ; then
4182	if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
4183	cmds=$module_expsym_cmds
4184	else
4185	cmds=$module_cmds
4186	fi
4187	else
4188	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
4189	cmds=$archive_expsym_cmds
4190	else
4191	cmds=$archive_cmds
4192	fi
4193	fi
4194
4195	# Append the command to remove the reloadable object files
4196	# to the just-reset $cmds.
4197	eval cmds=\"\$cmds~\$rm $delfiles\"
4198	fi
4199	save_ifs="$IFS"; IFS='~'
4200	for cmd in $cmds; do
4201	IFS="$save_ifs"
4202	eval cmd=\"$cmd\"
4203	$show "$cmd"
4204	$run eval "$cmd" \|\| {
4205	lt_exit=$?
4206
4207	# Restore the uninstalled library and exit
4208	if test "$mode" = relink; then
4209	$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
4210	fi
4211
4212	exit $lt_exit
4213	}
4214	done
4215	IFS="$save_ifs"
4216
4217	# Restore the uninstalled library and exit
4218	if test "$mode" = relink; then
4219	$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' \|\| exit $?
4220
4221	if test -n "$convenience"; then
4222	if test -z "$whole_archive_flag_spec"; then
4223	$show "${rm}r $gentop"
4224	$run ${rm}r "$gentop"
4225	fi
4226	fi
4227
4228	exit $EXIT_SUCCESS
4229	fi
4230
4231	# Create links to the real library.
4232	for linkname in $linknames; do
4233	if test "$realname" != "$linkname"; then
4234	$show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
4235	$run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' \|\| exit $?
4236	fi
4237	done
4238
4239	# If -module or -export-dynamic was specified, set the dlname.
4240	if test "$module" = yes \|\| test "$export_dynamic" = yes; then
4241	# On all known operating systems, these are identical.
4242	dlname="$soname"
4243	fi
4244	fi
4245	;;
4246
4247	obj)
4248	if test -n "$deplibs"; then
4249	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
4250	fi
4251
4252	if test -n "$dlfiles$dlprefiles" \|\| test "$dlself" != no; then
4253	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
4254	fi
4255
4256	if test -n "$rpath"; then
4257	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
4258	fi
4259
4260	if test -n "$xrpath"; then
4261	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
4262	fi
4263
4264	if test -n "$vinfo"; then
4265	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
4266	fi
4267
4268	if test -n "$release"; then
4269	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
4270	fi
4271
4272	case $output in
4273	*.lo)
4274	if test -n "$objs$old_deplibs"; then
4275	$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
4276	exit $EXIT_FAILURE
4277	fi
4278	libobj="$output"
4279	obj=`$echo "X$output" \| $Xsed -e "$lo2o"`
4280	;;
4281	*)
4282	libobj=
4283	obj="$output"
4284	;;
4285	esac
4286
4287	# Delete the old objects.
4288	$run $rm $obj $libobj
4289
4290	# Objects from convenience libraries. This assumes
4291	# single-version convenience libraries. Whenever we create
4292	# different ones for PIC/non-PIC, this we'll have to duplicate
4293	# the extraction.
4294	reload_conv_objs=
4295	gentop=
4296	# reload_cmds runs $LD directly, so let us get rid of
4297	# -Wl from whole_archive_flag_spec
4298	wl=
4299
4300	if test -n "$convenience"; then
4301	if test -n "$whole_archive_flag_spec"; then
4302	eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
4303	else
4304	gentop="$output_objdir/${obj}x"
4305	generated="$generated $gentop"
4306
4307	func_extract_archives $gentop $convenience
4308	reload_conv_objs="$reload_objs $func_extract_archives_result"
4309	fi
4310	fi
4311
4312	# Create the old-style object.
4313	reload_objs="$objs$old_deplibs "`$echo "X$libobjs" \| $SP2NL \| $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" \| $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
4314
4315	output="$obj"
4316	cmds=$reload_cmds
4317	save_ifs="$IFS"; IFS='~'
4318	for cmd in $cmds; do
4319	IFS="$save_ifs"
4320	eval cmd=\"$cmd\"
4321	$show "$cmd"
4322	$run eval "$cmd" \|\| exit $?
4323	done
4324	IFS="$save_ifs"
4325
4326	# Exit if we aren't doing a library object file.
4327	if test -z "$libobj"; then
4328	if test -n "$gentop"; then
4329	$show "${rm}r $gentop"
4330	$run ${rm}r $gentop
4331	fi
4332
4333	exit $EXIT_SUCCESS
4334	fi
4335
4336	if test "$build_libtool_libs" != yes; then
4337	if test -n "$gentop"; then
4338	$show "${rm}r $gentop"
4339	$run ${rm}r $gentop
4340	fi
4341
4342	# Create an invalid libtool object if no PIC, so that we don't
4343	# accidentally link it into a program.
4344	# $show "echo timestamp > $libobj"
4345	# $run eval "echo timestamp > $libobj" \|\| exit $?
4346	exit $EXIT_SUCCESS
4347	fi
4348
4349	if test -n "$pic_flag" \|\| test "$pic_mode" != default; then
4350	# Only do commands if we really have different PIC objects.
4351	reload_objs="$libobjs $reload_conv_objs"
4352	output="$libobj"
4353	cmds=$reload_cmds
4354	save_ifs="$IFS"; IFS='~'
4355	for cmd in $cmds; do
4356	IFS="$save_ifs"
4357	eval cmd=\"$cmd\"
4358	$show "$cmd"
4359	$run eval "$cmd" \|\| exit $?
4360	done
4361	IFS="$save_ifs"
4362	fi
4363
4364	if test -n "$gentop"; then
4365	$show "${rm}r $gentop"
4366	$run ${rm}r $gentop
4367	fi
4368
4369	exit $EXIT_SUCCESS
4370	;;
4371
4372	prog)
4373	case $host in
4374	cygwin) output=`$echo $output \| ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
4375	esac
4376	if test -n "$vinfo"; then
4377	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
4378	fi
4379
4380	if test -n "$release"; then
4381	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
4382	fi
4383
4384	if test "$preload" = yes; then
4385	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
4386	test "$dlopen_self_static" = unknown; then
4387	$echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
4388	fi
4389	fi
4390
4391	case $host in
4392	--rhapsody* \| --darwin1.[012])
4393	# On Rhapsody replace the C library is the System framework
4394	compile_deplibs=`$echo "X $compile_deplibs" \| $Xsed -e 's/ -lc / -framework System /'`
4395	finalize_deplibs=`$echo "X $finalize_deplibs" \| $Xsed -e 's/ -lc / -framework System /'`
4396	;;
4397	esac
4398
4399	case $host in
4400	darwin)
4401	# Don't allow lazy linking, it breaks C++ global constructors
4402	if test "$tagname" = CXX ; then
4403	compile_command="$compile_command ${wl}-bind_at_load"
4404	finalize_command="$finalize_command ${wl}-bind_at_load"
4405	fi
4406	;;
4407	esac
4408
4409
4410	# move library search paths that coincide with paths to not yet
4411	# installed libraries to the beginning of the library search list
4412	new_libs=
4413	for path in $notinst_path; do
4414	case " $new_libs " in
4415	" -L$path/$objdir ") ;;
4416	*)
4417	case " $compile_deplibs " in
4418	" -L$path/$objdir ")
4419	new_libs="$new_libs -L$path/$objdir" ;;
4420	esac
4421	;;
4422	esac
4423	done
4424	for deplib in $compile_deplibs; do
4425	case $deplib in
4426	-L*)
4427	case " $new_libs " in
4428	" $deplib ") ;;
4429	*) new_libs="$new_libs $deplib" ;;
4430	esac
4431	;;
4432	*) new_libs="$new_libs $deplib" ;;
4433	esac
4434	done
4435	compile_deplibs="$new_libs"
4436
4437
4438	compile_command="$compile_command $compile_deplibs"
4439	finalize_command="$finalize_command $finalize_deplibs"
4440
4441	if test -n "$rpath$xrpath"; then
4442	# If the user specified any rpath flags, then add them.
4443	for libdir in $rpath $xrpath; do
4444	# This is the magic to use -rpath.
4445	case "$finalize_rpath " in
4446	" $libdir ") ;;
4447	*) finalize_rpath="$finalize_rpath $libdir" ;;
4448	esac
4449	done
4450	fi
4451
4452	# Now hardcode the library paths
4453	rpath=
4454	hardcode_libdirs=
4455	for libdir in $compile_rpath $finalize_rpath; do
4456	if test -n "$hardcode_libdir_flag_spec"; then
4457	if test -n "$hardcode_libdir_separator"; then
4458	if test -z "$hardcode_libdirs"; then
4459	hardcode_libdirs="$libdir"
4460	else
4461	# Just accumulate the unique libdirs.
4462	case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4463	"$hardcode_libdir_separator$libdir$hardcode_libdir_separator")
4464	;;
4465	*)
4466	hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4467	;;
4468	esac
4469	fi
4470	else
4471	eval flag=\"$hardcode_libdir_flag_spec\"
4472	rpath="$rpath $flag"
4473	fi
4474	elif test -n "$runpath_var"; then
4475	case "$perm_rpath " in
4476	" $libdir ") ;;
4477	*) perm_rpath="$perm_rpath $libdir" ;;
4478	esac
4479	fi
4480	case $host in
4481	--cygwin* \| --mingw* \| --pw32* \| --os2*)
4482	testbindir=`$echo "X$libdir" \| $Xsed -e 's/lib$/bin*'`
4483	case :$dllsearchpath: in
4484	":$libdir:") ;;
4485	*) dllsearchpath="$dllsearchpath:$libdir";;
4486	esac
4487	case :$dllsearchpath: in
4488	":$testbindir:") ;;
4489	*) dllsearchpath="$dllsearchpath:$testbindir";;
4490	esac
4491	;;
4492	esac
4493	done
4494	# Substitute the hardcoded libdirs into the rpath.
4495	if test -n "$hardcode_libdir_separator" &&
4496	test -n "$hardcode_libdirs"; then
4497	libdir="$hardcode_libdirs"
4498	eval rpath=\" $hardcode_libdir_flag_spec\"
4499	fi
4500	compile_rpath="$rpath"
4501
4502	rpath=
4503	hardcode_libdirs=
4504	for libdir in $finalize_rpath; do
4505	if test -n "$hardcode_libdir_flag_spec"; then
4506	if test -n "$hardcode_libdir_separator"; then
4507	if test -z "$hardcode_libdirs"; then
4508	hardcode_libdirs="$libdir"
4509	else
4510	# Just accumulate the unique libdirs.
4511	case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4512	"$hardcode_libdir_separator$libdir$hardcode_libdir_separator")
4513	;;
4514	*)
4515	hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4516	;;
4517	esac
4518	fi
4519	else
4520	eval flag=\"$hardcode_libdir_flag_spec\"
4521	rpath="$rpath $flag"
4522	fi
4523	elif test -n "$runpath_var"; then
4524	case "$finalize_perm_rpath " in
4525	" $libdir ") ;;
4526	*) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
4527	esac
4528	fi
4529	done
4530	# Substitute the hardcoded libdirs into the rpath.
4531	if test -n "$hardcode_libdir_separator" &&
4532	test -n "$hardcode_libdirs"; then
4533	libdir="$hardcode_libdirs"
4534	eval rpath=\" $hardcode_libdir_flag_spec\"
4535	fi
4536	finalize_rpath="$rpath"
4537
4538	if test -n "$libobjs" && test "$build_old_libs" = yes; then
4539	# Transform all the library objects into standard objects.
4540	compile_command=`$echo "X$compile_command" \| $SP2NL \| $Xsed -e "$lo2o" \| $NL2SP`
4541	finalize_command=`$echo "X$finalize_command" \| $SP2NL \| $Xsed -e "$lo2o" \| $NL2SP`
4542	fi
4543
4544	dlsyms=
4545	if test -n "$dlfiles$dlprefiles" \|\| test "$dlself" != no; then
4546	if test -n "$NM" && test -n "$global_symbol_pipe"; then
4547	dlsyms="${outputname}S.c"
4548	else
4549	$echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
4550	fi
4551	fi
4552
4553	if test -n "$dlsyms"; then
4554	case $dlsyms in
4555	"") ;;
4556	*.c)
4557	# Discover the nlist of each of the dlfiles.
4558	nlist="$output_objdir/${outputname}.nm"
4559
4560	$show "$rm $nlist ${nlist}S ${nlist}T"
4561	$run $rm "$nlist" "${nlist}S" "${nlist}T"
4562
4563	# Parse the name list into a source file.
4564	$show "creating $output_objdir/$dlsyms"
4565
4566	test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
4567	/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
4568	/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
4569
4570	#ifdef __cplusplus
4571	extern \"C\" {
4572	#endif
4573
4574	/* Prevent the only kind of declaration conflicts we can make. */
4575	#define lt_preloaded_symbols some_other_symbol
4576
4577	/* External symbol declarations for the compiler. */\
4578	"
4579
4580	if test "$dlself" = yes; then
4581	$show "generating symbol list for \`$output'"
4582
4583	test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
4584
4585	# Add our own program objects to the symbol list.
4586	progfiles=`$echo "X$objs$old_deplibs" \| $SP2NL \| $Xsed -e "$lo2o" \| $NL2SP`
4587	for arg in $progfiles; do
4588	$show "extracting global C symbols from \`$arg'"
4589	$run eval "$NM $arg \| $global_symbol_pipe >> '$nlist'"
4590	done
4591
4592	if test -n "$exclude_expsyms"; then
4593	$run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
4594	$run eval '$mv "$nlist"T "$nlist"'
4595	fi
4596
4597	if test -n "$export_symbols_regex"; then
4598	$run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
4599	$run eval '$mv "$nlist"T "$nlist"'
4600	fi
4601
4602	# Prepare the list of exported symbols
4603	if test -z "$export_symbols"; then
4604	export_symbols="$output_objdir/$outputname.exp"
4605	$run $rm $export_symbols
4606	$run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"'
4607	case $host in
4608	cygwin \| mingw )
4609	$run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
4610	$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
4611	;;
4612	esac
4613	else
4614	$run eval "${SED} -e 's/$[].[*^$]$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
4615	$run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
4616	$run eval 'mv "$nlist"T "$nlist"'
4617	case $host in
4618	cygwin \| mingw )
4619	$run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
4620	$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
4621	;;
4622	esac
4623	fi
4624	fi
4625
4626	for arg in $dlprefiles; do
4627	$show "extracting global C symbols from \`$arg'"
4628	name=`$echo "$arg" \| ${SED} -e 's%^.*/%%'`
4629	$run eval '$echo ": $name " >> "$nlist"'
4630	$run eval "$NM $arg \| $global_symbol_pipe >> '$nlist'"
4631	done
4632
4633	if test -z "$run"; then
4634	# Make sure we have at least an empty file.
4635	test -f "$nlist" \|\| : > "$nlist"
4636
4637	if test -n "$exclude_expsyms"; then
4638	$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
4639	$mv "$nlist"T "$nlist"
4640	fi
4641
4642	# Try sorting and uniquifying the output.
4643	if grep -v "^: " < "$nlist" \|
4644	if sort -k 3 </dev/null >/dev/null 2>&1; then
4645	sort -k 3
4646	else
4647	sort +2
4648	fi \|
4649	uniq > "$nlist"S; then
4650	:
4651	else
4652	grep -v "^: " < "$nlist" > "$nlist"S
4653	fi
4654
4655	if test -f "$nlist"S; then
4656	eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
4657	else
4658	$echo '/* NONE */' >> "$output_objdir/$dlsyms"
4659	fi
4660
4661	$echo >> "$output_objdir/$dlsyms" "\
4662
4663	#undef lt_preloaded_symbols
4664
4665	#if defined (__STDC__) && __STDC__
4666	# define lt_ptr void *
4667	#else
4668	# define lt_ptr char *
4669	# define const
4670	#endif
4671
4672	/* The mapping between symbol names and symbols. */
4673	"
4674
4675	case $host in
4676	cygwin \| mingw )
4677	$echo >> "$output_objdir/$dlsyms" "\
4678	/* DATA imports from DLLs on WIN32 can't be const, because
4679	runtime relocations are performed -- see ld's documentation
4680	on pseudo-relocs */
4681	struct {
4682	"
4683	;;
4684	* )
4685	$echo >> "$output_objdir/$dlsyms" "\
4686	const struct {
4687	"
4688	;;
4689	esac
4690
4691
4692	$echo >> "$output_objdir/$dlsyms" "\
4693	const char *name;
4694	lt_ptr address;
4695	}
4696	lt_preloaded_symbols[] =
4697	{\
4698	"
4699
4700	eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
4701
4702	$echo >> "$output_objdir/$dlsyms" "\
4703	{0, (lt_ptr) 0}
4704	};
4705
4706	/* This works around a problem in FreeBSD linker */
4707	#ifdef FREEBSD_WORKAROUND
4708	static const void *lt_preloaded_setup() {
4709	return lt_preloaded_symbols;
4710	}
4711	#endif
4712
4713	#ifdef __cplusplus
4714	}
4715	#endif\
4716	"
4717	fi
4718
4719	pic_flag_for_symtable=
4720	case $host in
4721	# compiling the symbol table file with pic_flag works around
4722	# a FreeBSD bug that causes programs to crash when -lm is
4723	# linked before any other PIC object. But we must not use
4724	# pic_flag when linking with -static. The problem exists in
4725	# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
4726	--freebsd2\|--freebsd3.0\|--freebsdelf3.0*)
4727	case "$compile_command " in
4728	" -static ") ;;
4729	*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
4730	esac;;
4731	--hpux*)
4732	case "$compile_command " in
4733	" -static ") ;;
4734	*) pic_flag_for_symtable=" $pic_flag";;
4735	esac
4736	esac
4737
4738	# Now compile the dynamic symbol file.
4739	$show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
4740	$run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' \|\| exit $?
4741
4742	# Clean up the generated files.
4743	$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
4744	$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
4745
4746	# Transform the symbol file into the correct name.
4747	case $host in
4748	cygwin \| mingw )
4749	if test -f "$output_objdir/${outputname}.def" ; then
4750	compile_command=`$echo "X$compile_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
4751	finalize_command=`$echo "X$finalize_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
4752	else
4753	compile_command=`$echo "X$compile_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4754	finalize_command=`$echo "X$finalize_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4755	fi
4756	;;
4757	* )
4758	compile_command=`$echo "X$compile_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4759	finalize_command=`$echo "X$finalize_command" \| $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4760	;;
4761	esac
4762	;;
4763	*)
4764	$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
4765	exit $EXIT_FAILURE
4766	;;
4767	esac
4768	else
4769	# We keep going just in case the user didn't refer to
4770	# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
4771	# really was required.
4772
4773	# Nullify the symbol file.
4774	compile_command=`$echo "X$compile_command" \| $Xsed -e "s% @SYMFILE@%%"`
4775	finalize_command=`$echo "X$finalize_command" \| $Xsed -e "s% @SYMFILE@%%"`
4776	fi
4777
4778	if test "$need_relink" = no \|\| test "$build_libtool_libs" != yes; then
4779	# Replace the output file specification.
4780	compile_command=`$echo "X$compile_command" \| $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4781	link_command="$compile_command$compile_rpath"
4782
4783	# We have no uninstalled library dependencies, so finalize right now.
4784	$show "$link_command"
4785	$run eval "$link_command"
4786	exit_status=$?
4787
4788	# Delete the generated files.
4789	if test -n "$dlsyms"; then
4790	$show "$rm $output_objdir/${outputname}S.${objext}"
4791	$run $rm "$output_objdir/${outputname}S.${objext}"
4792	fi
4793
4794	exit $exit_status
4795	fi
4796
4797	if test -n "$shlibpath_var"; then
4798	# We should set the shlibpath_var
4799	rpath=
4800	for dir in $temp_rpath; do
4801	case $dir in
4802	[\\/]* \| [A-Za-z]:[\\/]*)
4803	# Absolute path.
4804	rpath="$rpath$dir:"
4805	;;
4806	*)
4807	# Relative path: add a thisdir entry.
4808	rpath="$rpath\$thisdir/$dir:"
4809	;;
4810	esac
4811	done
4812	temp_rpath="$rpath"
4813	fi
4814
4815	if test -n "$compile_shlibpath$finalize_shlibpath"; then
4816	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
4817	fi
4818	if test -n "$finalize_shlibpath"; then
4819	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
4820	fi
4821
4822	compile_var=
4823	finalize_var=
4824	if test -n "$runpath_var"; then
4825	if test -n "$perm_rpath"; then
4826	# We should set the runpath_var.
4827	rpath=
4828	for dir in $perm_rpath; do
4829	rpath="$rpath$dir:"
4830	done
4831	compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
4832	fi
4833	if test -n "$finalize_perm_rpath"; then
4834	# We should set the runpath_var.
4835	rpath=
4836	for dir in $finalize_perm_rpath; do
4837	rpath="$rpath$dir:"
4838	done
4839	finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
4840	fi
4841	fi
4842
4843	if test "$no_install" = yes; then
4844	# We don't need to create a wrapper script.
4845	link_command="$compile_var$compile_command$compile_rpath"
4846	# Replace the output file specification.
4847	link_command=`$echo "X$link_command" \| $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4848	# Delete the old output file.
4849	$run $rm $output
4850	# Link the executable and exit
4851	$show "$link_command"
4852	$run eval "$link_command" \|\| exit $?
4853	exit $EXIT_SUCCESS
4854	fi
4855
4856	if test "$hardcode_action" = relink; then
4857	# Fast installation is not supported
4858	link_command="$compile_var$compile_command$compile_rpath"
4859	relink_command="$finalize_var$finalize_command$finalize_rpath"
4860
4861	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
4862	$echo "$modename: \`$output' will be relinked during installation" 1>&2
4863	else
4864	if test "$fast_install" != no; then
4865	link_command="$finalize_var$compile_command$finalize_rpath"
4866	if test "$fast_install" = yes; then
4867	relink_command=`$echo "X$compile_var$compile_command$compile_rpath" \| $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
4868	else
4869	# fast_install is set to needless
4870	relink_command=
4871	fi
4872	else
4873	link_command="$compile_var$compile_command$compile_rpath"
4874	relink_command="$finalize_var$finalize_command$finalize_rpath"
4875	fi
4876	fi
4877
4878	# Replace the output file specification.
4879	link_command=`$echo "X$link_command" \| $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
4880
4881	# Delete the old output files.
4882	$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
4883
4884	$show "$link_command"
4885	$run eval "$link_command" \|\| exit $?
4886
4887	# Now create the wrapper script.
4888	$show "creating $output"
4889
4890	# Quote the relink command for shipping.
4891	if test -n "$relink_command"; then
4892	# Preserve any variables that may affect compiler behavior
4893	for var in $variables_saved_for_relink; do
4894	if eval test -z \"\${$var+set}\"; then
4895	relink_command="{ test -z \"\${$var+set}\" \|\| unset $var \|\| { $var=; export $var; }; }; $relink_command"
4896	elif eval var_value=\$$var; test -z "$var_value"; then
4897	relink_command="$var=; export $var; $relink_command"
4898	else
4899	var_value=`$echo "X$var_value" \| $Xsed -e "$sed_quote_subst"`
4900	relink_command="$var=\"$var_value\"; export $var; $relink_command"
4901	fi
4902	done
4903	relink_command="(cd `pwd`; $relink_command)"
4904	relink_command=`$echo "X$relink_command" \| $Xsed -e "$sed_quote_subst"`
4905	fi
4906
4907	# Quote $echo for shipping.
4908	if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
4909	case $progpath in
4910	[\\/]* \| [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
4911	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
4912	esac
4913	qecho=`$echo "X$qecho" \| $Xsed -e "$sed_quote_subst"`
4914	else
4915	qecho=`$echo "X$echo" \| $Xsed -e "$sed_quote_subst"`
4916	fi
4917
4918	# Only actually do things if our run command is non-null.
4919	if test -z "$run"; then
4920	# win32 will think the script is a binary if it has
4921	# a .exe suffix, so we strip it off here.
4922	case $output in
4923	*.exe) output=`$echo $output\|${SED} 's,.exe$,,'` ;;
4924	esac
4925	# test for cygwin because mv fails w/o .exe extensions
4926	case $host in
4927	cygwin)
4928	exeext=.exe
4929	outputname=`$echo $outputname\|${SED} 's,.exe$,,'` ;;
4930	*) exeext= ;;
4931	esac
4932	case $host in
4933	cygwin \| mingw )
4934	output_name=`basename $output`
4935	output_path=`dirname $output`
4936	cwrappersource="$output_path/$objdir/lt-$output_name.c"
4937	cwrapper="$output_path/$output_name.exe"
4938	$rm $cwrappersource $cwrapper
4939	trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
4940
4941	cat > $cwrappersource <<EOF
4942
4943	/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
4944	Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
4945
4946	The $output program cannot be directly executed until all the libtool
4947	libraries that it depends on are installed.
4948
4949	This wrapper executable should never be moved out of the build directory.
4950	If it is, it will not operate correctly.
4951
4952	Currently, it simply execs the wrapper script "/bin/sh $output",
4953	but could eventually absorb all of the scripts functionality and
4954	exec $objdir/$outputname directly.
4955	*/
4956	EOF
4957	cat >> $cwrappersource<<"EOF"
4958	#include <stdio.h>
4959	#include <stdlib.h>
4960	#include <unistd.h>
4961	#include <malloc.h>
4962	#include <stdarg.h>
4963	#include <assert.h>
4964	#include <string.h>
4965	#include <ctype.h>
4966	#include <sys/stat.h>
4967
4968	#if defined(PATH_MAX)
4969	# define LT_PATHMAX PATH_MAX
4970	#elif defined(MAXPATHLEN)
4971	# define LT_PATHMAX MAXPATHLEN
4972	#else
4973	# define LT_PATHMAX 1024
4974	#endif
4975
4976	#ifndef DIR_SEPARATOR
4977	# define DIR_SEPARATOR '/'
4978	# define PATH_SEPARATOR ':'
4979	#endif
4980
4981	#if defined (_WIN32) \|\| defined (__MSDOS__) \|\| defined (__DJGPP__) \|\| \
4982	defined (__OS2__)
4983	# define HAVE_DOS_BASED_FILE_SYSTEM
4984	# ifndef DIR_SEPARATOR_2
4985	# define DIR_SEPARATOR_2 '\\'
4986	# endif
4987	# ifndef PATH_SEPARATOR_2
4988	# define PATH_SEPARATOR_2 ';'
4989	# endif
4990	#endif
4991
4992	#ifndef DIR_SEPARATOR_2
4993	# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
4994	#else /* DIR_SEPARATOR_2 */
4995	# define IS_DIR_SEPARATOR(ch) \
4996	(((ch) == DIR_SEPARATOR) \|\| ((ch) == DIR_SEPARATOR_2))
4997	#endif /* DIR_SEPARATOR_2 */
4998
4999	#ifndef PATH_SEPARATOR_2
5000	# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
5001	#else /* PATH_SEPARATOR_2 */
5002	# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
5003	#endif /* PATH_SEPARATOR_2 */
5004
5005	#define XMALLOC(type, num) ((type ) xmalloc ((num) sizeof(type)))
5006	#define XFREE(stale) do { \
5007	if (stale) { free ((void *) stale); stale = 0; } \
5008	} while (0)
5009
5010	/* -DDEBUG is fairly common in CFLAGS. */
5011	#undef DEBUG
5012	#if defined DEBUGWRAPPER
5013	# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
5014	#else
5015	# define DEBUG(format, ...)
5016	#endif
5017
5018	const char *program_name = NULL;
5019
5020	void * xmalloc (size_t num);
5021	char * xstrdup (const char *string);
5022	const char * base_name (const char *name);
5023	char * find_executable(const char *wrapper);
5024	int check_executable(const char *path);
5025	char * strendzap(char str, const char pat);
5026	void lt_fatal (const char *message, ...);
5027
5028	int
5029	main (int argc, char *argv[])
5030	{
5031	char **newargz;
5032	int i;
5033
5034	program_name = (char *) xstrdup (base_name (argv[0]));
5035	DEBUG("(main) argv[0] : %s\n",argv[0]);
5036	DEBUG("(main) program_name : %s\n",program_name);
5037	newargz = XMALLOC(char *, argc+2);
5038	EOF
5039
5040	cat >> $cwrappersource <<EOF
5041	newargz[0] = (char *) xstrdup("$SHELL");
5042	EOF
5043
5044	cat >> $cwrappersource <<"EOF"
5045	newargz[1] = find_executable(argv[0]);
5046	if (newargz[1] == NULL)
5047	lt_fatal("Couldn't find %s", argv[0]);
5048	DEBUG("(main) found exe at : %s\n",newargz[1]);
5049	/* we know the script has the same name, without the .exe */
5050	/* so make sure newargz[1] doesn't end in .exe */
5051	strendzap(newargz[1],".exe");
5052	for (i = 1; i < argc; i++)
5053	newargz[i+1] = xstrdup(argv[i]);
5054	newargz[argc+1] = NULL;
5055
5056	for (i=0; i<argc+1; i++)
5057	{
5058	DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
5059	;
5060	}
5061
5062	EOF
5063
5064	case $host_os in
5065	mingw*)
5066	cat >> $cwrappersource <<EOF
5067	execv("$SHELL",(char const **)newargz);
5068	EOF
5069	;;
5070	*)
5071	cat >> $cwrappersource <<EOF
5072	execv("$SHELL",newargz);
5073	EOF
5074	;;
5075	esac
5076
5077	cat >> $cwrappersource <<"EOF"
5078	return 127;
5079	}
5080
5081	void *
5082	xmalloc (size_t num)
5083	{
5084	void * p = (void *) malloc (num);
5085	if (!p)
5086	lt_fatal ("Memory exhausted");
5087
5088	return p;
5089	}
5090
5091	char *
5092	xstrdup (const char *string)
5093	{
5094	return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
5095	;
5096	}
5097
5098	const char *
5099	base_name (const char *name)
5100	{
5101	const char *base;
5102
5103	#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
5104	/* Skip over the disk name in MSDOS pathnames. */
5105	if (isalpha ((unsigned char)name[0]) && name[1] == ':')
5106	name += 2;
5107	#endif
5108
5109	for (base = name; *name; name++)
5110	if (IS_DIR_SEPARATOR (*name))
5111	base = name + 1;
5112	return base;
5113	}
5114
5115	int
5116	check_executable(const char * path)
5117	{
5118	struct stat st;
5119
5120	DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
5121	if ((!path) \|\| (!*path))
5122	return 0;
5123
5124	if ((stat (path, &st) >= 0) &&
5125	(
5126	/* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
5127	#if defined (S_IXOTH)
5128	((st.st_mode & S_IXOTH) == S_IXOTH) \|\|
5129	#endif
5130	#if defined (S_IXGRP)
5131	((st.st_mode & S_IXGRP) == S_IXGRP) \|\|
5132	#endif
5133	((st.st_mode & S_IXUSR) == S_IXUSR))
5134	)
5135	return 1;
5136	else
5137	return 0;
5138	}
5139
5140	/* Searches for the full path of the wrapper. Returns
5141	newly allocated full path name if found, NULL otherwise */
5142	char *
5143	find_executable (const char* wrapper)
5144	{
5145	int has_slash = 0;
5146	const char* p;
5147	const char* p_next;
5148	/* static buffer for getcwd */
5149	char tmp[LT_PATHMAX + 1];
5150	int tmp_len;
5151	char* concat_name;
5152
5153	DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
5154
5155	if ((wrapper == NULL) \|\| (*wrapper == '\0'))
5156	return NULL;
5157
5158	/* Absolute path? */
5159	#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
5160	if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
5161	{
5162	concat_name = xstrdup (wrapper);
5163	if (check_executable(concat_name))
5164	return concat_name;
5165	XFREE(concat_name);
5166	}
5167	else
5168	{
5169	#endif
5170	if (IS_DIR_SEPARATOR (wrapper[0]))
5171	{
5172	concat_name = xstrdup (wrapper);
5173	if (check_executable(concat_name))
5174	return concat_name;
5175	XFREE(concat_name);
5176	}
5177	#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
5178	}
5179	#endif
5180
5181	for (p = wrapper; *p; p++)
5182	if (*p == '/')
5183	{
5184	has_slash = 1;
5185	break;
5186	}
5187	if (!has_slash)
5188	{
5189	/* no slashes; search PATH */
5190	const char* path = getenv ("PATH");
5191	if (path != NULL)
5192	{
5193	for (p = path; *p; p = p_next)
5194	{
5195	const char* q;
5196	size_t p_len;
5197	for (q = p; *q; q++)
5198	if (IS_PATH_SEPARATOR(*q))
5199	break;
5200	p_len = q - p;
5201	p_next = (*q == '\0' ? q : q + 1);
5202	if (p_len == 0)
5203	{
5204	/* empty path: current directory */
5205	if (getcwd (tmp, LT_PATHMAX) == NULL)
5206	lt_fatal ("getcwd failed");
5207	tmp_len = strlen(tmp);
5208	concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
5209	memcpy (concat_name, tmp, tmp_len);
5210	concat_name[tmp_len] = '/';
5211	strcpy (concat_name + tmp_len + 1, wrapper);
5212	}
5213	else
5214	{
5215	concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
5216	memcpy (concat_name, p, p_len);
5217	concat_name[p_len] = '/';
5218	strcpy (concat_name + p_len + 1, wrapper);
5219	}
5220	if (check_executable(concat_name))
5221	return concat_name;
5222	XFREE(concat_name);
5223	}
5224	}
5225	/* not found in PATH; assume curdir */
5226	}
5227	/* Relative path \| not found in path: prepend cwd */
5228	if (getcwd (tmp, LT_PATHMAX) == NULL)
5229	lt_fatal ("getcwd failed");
5230	tmp_len = strlen(tmp);
5231	concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
5232	memcpy (concat_name, tmp, tmp_len);
5233	concat_name[tmp_len] = '/';
5234	strcpy (concat_name + tmp_len + 1, wrapper);
5235
5236	if (check_executable(concat_name))
5237	return concat_name;
5238	XFREE(concat_name);
5239	return NULL;
5240	}
5241
5242	char *
5243	strendzap(char str, const char pat)
5244	{
5245	size_t len, patlen;
5246
5247	assert(str != NULL);
5248	assert(pat != NULL);
5249
5250	len = strlen(str);
5251	patlen = strlen(pat);
5252
5253	if (patlen <= len)
5254	{
5255	str += len - patlen;
5256	if (strcmp(str, pat) == 0)
5257	*str = '\0';
5258	}
5259	return str;
5260	}
5261
5262	static void
5263	lt_error_core (int exit_status, const char * mode,
5264	const char * message, va_list ap)
5265	{
5266	fprintf (stderr, "%s: %s: ", program_name, mode);
5267	vfprintf (stderr, message, ap);
5268	fprintf (stderr, ".\n");
5269
5270	if (exit_status >= 0)
5271	exit (exit_status);
5272	}
5273
5274	void
5275	lt_fatal (const char *message, ...)
5276	{
5277	va_list ap;
5278	va_start (ap, message);
5279	lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
5280	va_end (ap);
5281	}
5282	EOF
5283	# we should really use a build-platform specific compiler
5284	# here, but OTOH, the wrappers (shell script and this C one)
5285	# are only useful if you want to execute the "real" binary.
5286	# Since the "real" binary is built for $host, then this
5287	# wrapper might as well be built for $host, too.
5288	$run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
5289	;;
5290	esac
5291	$rm $output
5292	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
5293
5294	$echo > $output "\
5295	#! $SHELL
5296
5297	# $output - temporary wrapper script for $objdir/$outputname
5298	# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
5299	#
5300	# The $output program cannot be directly executed until all the libtool
5301	# libraries that it depends on are installed.
5302	#
5303	# This wrapper script should never be moved out of the build directory.
5304	# If it is, it will not operate correctly.
5305
5306	# Sed substitution that helps us do robust quoting. It backslashifies
5307	# metacharacters that are still active within double-quoted strings.
5308	Xsed='${SED} -e 1s/^X//'
5309	sed_quote_subst='$sed_quote_subst'
5310
5311	# The HP-UX ksh and POSIX shell print the target directory to stdout
5312	# if CDPATH is set.
5313	(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
5314
5315	relink_command=\"$relink_command\"
5316
5317	# This environment variable determines our operation mode.
5318	if test \"\$libtool_install_magic\" = \"$magic\"; then
5319	# install mode needs the following variable:
5320	notinst_deplibs='$notinst_deplibs'
5321	else
5322	# When we are sourced in execute mode, \$file and \$echo are already set.
5323	if test \"\$libtool_execute_magic\" != \"$magic\"; then
5324	echo=\"$qecho\"
5325	file=\"\$0\"
5326	# Make sure echo works.
5327	if test \"X\$1\" = X--no-reexec; then
5328	# Discard the --no-reexec flag, and continue.
5329	shift
5330	elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
5331	# Yippee, \$echo works!
5332	:
5333	else
5334	# Restart under the correct shell, and then maybe \$echo will work.
5335	exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
5336	fi
5337	fi\
5338	"
5339	$echo >> $output "\
5340
5341	# Find the directory that this script lives in.
5342	thisdir=\`\$echo \"X\$file\" \| \$Xsed -e 's%/[^/]*$%%'\`
5343	test \"x\$thisdir\" = \"x\$file\" && thisdir=.
5344
5345	# Follow symbolic links until we get to the real thisdir.
5346	file=\`ls -ld \"\$file\" \| ${SED} -n 's/.*-> //p'\`
5347	while test -n \"\$file\"; do
5348	destdir=\`\$echo \"X\$file\" \| \$Xsed -e 's%/[^/]*\$%%'\`
5349
5350	# If there was a directory component, then change thisdir.
5351	if test \"x\$destdir\" != \"x\$file\"; then
5352	case \"\$destdir\" in
5353	[\\\\/]* \| [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
5354	*) thisdir=\"\$thisdir/\$destdir\" ;;
5355	esac
5356	fi
5357
5358	file=\`\$echo \"X\$file\" \| \$Xsed -e 's%^.*/%%'\`
5359	file=\`ls -ld \"\$thisdir/\$file\" \| ${SED} -n 's/.*-> //p'\`
5360	done
5361
5362	# Try to get the absolute directory name.
5363	absdir=\`cd \"\$thisdir\" && pwd\`
5364	test -n \"\$absdir\" && thisdir=\"\$absdir\"
5365	"
5366
5367	if test "$fast_install" = yes; then
5368	$echo >> $output "\
5369	program=lt-'$outputname'$exeext
5370	progdir=\"\$thisdir/$objdir\"
5371
5372	if test ! -f \"\$progdir/\$program\" \|\| \\
5373	{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null \| ${SED} 1q\`; \\
5374	test \"X\$file\" != \"X\$progdir/\$program\"; }; then
5375
5376	file=\"\$\$-\$program\"
5377
5378	if test ! -d \"\$progdir\"; then
5379	$mkdir \"\$progdir\"
5380	else
5381	$rm \"\$progdir/\$file\"
5382	fi"
5383
5384	$echo >> $output "\
5385
5386	# relink executable if necessary
5387	if test -n \"\$relink_command\"; then
5388	if relink_command_output=\`eval \$relink_command 2>&1\`; then :
5389	else
5390	$echo \"\$relink_command_output\" >&2
5391	$rm \"\$progdir/\$file\"
5392	exit $EXIT_FAILURE
5393	fi
5394	fi
5395
5396	$mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null \|\|
5397	{ $rm \"\$progdir/\$program\";
5398	$mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
5399	$rm \"\$progdir/\$file\"
5400	fi"
5401	else
5402	$echo >> $output "\
5403	program='$outputname'
5404	progdir=\"\$thisdir/$objdir\"
5405	"
5406	fi
5407
5408	$echo >> $output "\
5409
5410	if test -f \"\$progdir/\$program\"; then"
5411
5412	# Export our shlibpath_var if we have one.
5413	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
5414	$echo >> $output "\
5415	# Add our own library path to $shlibpath_var
5416	$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
5417
5418	# Some systems cannot cope with colon-terminated $shlibpath_var
5419	# The second colon is a workaround for a bug in BeOS R4 sed
5420	$shlibpath_var=\`\$echo \"X\$$shlibpath_var\" \| \$Xsed -e 's/::*\$//'\`
5421
5422	export $shlibpath_var
5423	"
5424	fi
5425
5426	# fixup the dll searchpath if we need to.
5427	if test -n "$dllsearchpath"; then
5428	$echo >> $output "\
5429	# Add the dll search path components to the executable PATH
5430	PATH=$dllsearchpath:\$PATH
5431	"
5432	fi
5433
5434	$echo >> $output "\
5435	if test \"\$libtool_execute_magic\" != \"$magic\"; then
5436	# Run the actual program with our arguments.
5437
5438	# Make sure env LD_LIBRARY_PATH does not mess us up
5439	if test -n \"\${LD_LIBRARY_PATH+set}\"; then
5440	export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH
5441	fi
5442	"
5443	case $host in
5444	# Backslashes separate directories on plain windows
5445	--mingw \| --os2*)
5446	$echo >> $output "\
5447	exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
5448	"
5449	;;
5450
5451	*)
5452	$echo >> $output "\
5453	exec \"\$progdir/\$program\" \${1+\"\$@\"}
5454	"
5455	;;
5456	esac
5457	$echo >> $output "\
5458	\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
5459	exit $EXIT_FAILURE
5460	fi
5461	else
5462	# The program doesn't exist.
5463	\$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
5464	\$echo \"This script is just a wrapper for \$program.\" 1>&2
5465	$echo \"See the $PACKAGE documentation for more information.\" 1>&2
5466	exit $EXIT_FAILURE
5467	fi
5468	fi\
5469	"
5470	chmod +x $output
5471	fi
5472	exit $EXIT_SUCCESS
5473	;;
5474	esac
5475
5476	# See if we need to build an old-fashioned archive.
5477	for oldlib in $oldlibs; do
5478
5479	if test "$build_libtool_libs" = convenience; then
5480	oldobjs="$libobjs_save"
5481	addlibs="$convenience"
5482	build_libtool_libs=no
5483	else
5484	if test "$build_libtool_libs" = module; then
5485	oldobjs="$libobjs_save"
5486	build_libtool_libs=no
5487	else
5488	oldobjs="$old_deplibs $non_pic_objects"
5489	fi
5490	addlibs="$old_convenience"
5491	fi
5492
5493	if test -n "$addlibs"; then
5494	gentop="$output_objdir/${outputname}x"
5495	generated="$generated $gentop"
5496
5497	func_extract_archives $gentop $addlibs
5498	oldobjs="$oldobjs $func_extract_archives_result"
5499	fi
5500
5501	# Do each command in the archive commands.
5502	if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
5503	cmds=$old_archive_from_new_cmds
5504	else
5505	# POSIX demands no paths to be encoded in archives. We have
5506	# to avoid creating archives with duplicate basenames if we
5507	# might have to extract them afterwards, e.g., when creating a
5508	# static archive out of a convenience library, or when linking
5509	# the entirety of a libtool archive into another (currently
5510	# not supported by libtool).
5511	if (for obj in $oldobjs
5512	do
5513	$echo "X$obj" \| $Xsed -e 's%^.*/%%'
5514	done \| sort \| sort -uc >/dev/null 2>&1); then
5515	:
5516	else
5517	$echo "copying selected object files to avoid basename conflicts..."
5518
5519	if test -z "$gentop"; then
5520	gentop="$output_objdir/${outputname}x"
5521	generated="$generated $gentop"
5522
5523	$show "${rm}r $gentop"
5524	$run ${rm}r "$gentop"
5525	$show "$mkdir $gentop"
5526	$run $mkdir "$gentop"
5527	exit_status=$?
5528	if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
5529	exit $exit_status
5530	fi
5531	fi
5532
5533	save_oldobjs=$oldobjs
5534	oldobjs=
5535	counter=1
5536	for obj in $save_oldobjs
5537	do
5538	objbase=`$echo "X$obj" \| $Xsed -e 's%^.*/%%'`
5539	case " $oldobjs " in
5540	" ") oldobjs=$obj ;;
5541	[\ /]"$objbase ")
5542	while :; do
5543	# Make sure we don't pick an alternate name that also
5544	# overlaps.
5545	newobj=lt$counter-$objbase
5546	counter=`expr $counter + 1`
5547	case " $oldobjs " in
5548	[\ /]"$newobj ") ;;
5549	*) if test ! -f "$gentop/$newobj"; then break; fi ;;
5550	esac
5551	done
5552	$show "ln $obj $gentop/$newobj \|\| cp $obj $gentop/$newobj"
5553	$run ln "$obj" "$gentop/$newobj" \|\|
5554	$run cp "$obj" "$gentop/$newobj"
5555	oldobjs="$oldobjs $gentop/$newobj"
5556	;;
5557	*) oldobjs="$oldobjs $obj" ;;
5558	esac
5559	done
5560	fi
5561
5562	eval cmds=\"$old_archive_cmds\"
5563
5564	if len=`expr "X$cmds" : ".*"` &&
5565	test "$len" -le "$max_cmd_len" \|\| test "$max_cmd_len" -le -1; then
5566	cmds=$old_archive_cmds
5567	else
5568	# the command line is too long to link in one step, link in parts
5569	$echo "using piecewise archive linking..."
5570	save_RANLIB=$RANLIB
5571	RANLIB=:
5572	objlist=
5573	concat_cmds=
5574	save_oldobjs=$oldobjs
5575
5576	# Is there a better way of finding the last object in the list?
5577	for obj in $save_oldobjs
5578	do
5579	last_oldobj=$obj
5580	done
5581	for obj in $save_oldobjs
5582	do
5583	oldobjs="$objlist $obj"
5584	objlist="$objlist $obj"
5585	eval test_cmds=\"$old_archive_cmds\"
5586	if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
5587	test "$len" -le "$max_cmd_len"; then
5588	:
5589	else
5590	# the above command should be used before it gets too long
5591	oldobjs=$objlist
5592	if test "$obj" = "$last_oldobj" ; then
5593	RANLIB=$save_RANLIB
5594	fi
5595	test -z "$concat_cmds" \|\| concat_cmds=$concat_cmds~
5596	eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
5597	objlist=
5598	fi
5599	done
5600	RANLIB=$save_RANLIB
5601	oldobjs=$objlist
5602	if test "X$oldobjs" = "X" ; then
5603	eval cmds=\"\$concat_cmds\"
5604	else
5605	eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
5606	fi
5607	fi
5608	fi
5609	save_ifs="$IFS"; IFS='~'
5610	for cmd in $cmds; do
5611	eval cmd=\"$cmd\"
5612	IFS="$save_ifs"
5613	$show "$cmd"
5614	$run eval "$cmd" \|\| exit $?
5615	done
5616	IFS="$save_ifs"
5617	done
5618
5619	if test -n "$generated"; then
5620	$show "${rm}r$generated"
5621	$run ${rm}r$generated
5622	fi
5623
5624	# Now create the libtool archive.
5625	case $output in
5626	*.la)
5627	old_library=
5628	test "$build_old_libs" = yes && old_library="$libname.$libext"
5629	$show "creating $output"
5630
5631	# Preserve any variables that may affect compiler behavior
5632	for var in $variables_saved_for_relink; do
5633	if eval test -z \"\${$var+set}\"; then
5634	relink_command="{ test -z \"\${$var+set}\" \|\| unset $var \|\| { $var=; export $var; }; }; $relink_command"
5635	elif eval var_value=\$$var; test -z "$var_value"; then
5636	relink_command="$var=; export $var; $relink_command"
5637	else
5638	var_value=`$echo "X$var_value" \| $Xsed -e "$sed_quote_subst"`
5639	relink_command="$var=\"$var_value\"; export $var; $relink_command"
5640	fi
5641	done
5642	# Quote the link command for shipping.
5643	relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
5644	relink_command=`$echo "X$relink_command" \| $Xsed -e "$sed_quote_subst"`
5645	if test "$hardcode_automatic" = yes ; then
5646	relink_command=
5647	fi
5648
5649
5650	# Only create the output if not a dry run.
5651	if test -z "$run"; then
5652	for installed in no yes; do
5653	if test "$installed" = yes; then
5654	if test -z "$install_libdir"; then
5655	break
5656	fi
5657	output="$output_objdir/$outputname"i
5658	# Replace all uninstalled libtool libraries with the installed ones
5659	newdependency_libs=
5660	for deplib in $dependency_libs; do
5661	case $deplib in
5662	*.la)
5663	name=`$echo "X$deplib" \| $Xsed -e 's%^.*/%%'`
5664	eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib`
5665	if test -z "$libdir"; then
5666	$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
5667	exit $EXIT_FAILURE
5668	fi
5669	if test "X$EGREP" = X ; then
5670	EGREP=egrep
5671	fi
5672	# We do not want portage's install root ($D) present. Check only for
5673	# this if the .la is being installed.
5674	if test "$installed" = yes && test "$D"; then
5675	eval mynewdependency_lib=`echo "$libdir/$name" \|sed -e "s:$D:/:g" -e 's:/\+:/:g'`
5676	else
5677	mynewdependency_lib="$libdir/$name"
5678	fi
5679	# Do not add duplicates
5680	if test "$mynewdependency_lib"; then
5681	my_little_ninja_foo_1=`echo $newdependency_libs \|$EGREP -e "$mynewdependency_lib"`
5682	if test -z "$my_little_ninja_foo_1"; then
5683	newdependency_libs="$newdependency_libs $mynewdependency_lib"
5684	fi
5685	fi
5686	;;
5687	*)
5688	if test "$installed" = yes; then
5689	# Rather use S=WORKDIR if our version of portage supports it.
5690	# This is because some ebuild (gcc) do not use $S as buildroot.
5691	if test "$PWORKDIR"; then
5692	S="$PWORKDIR"
5693	fi
5694	# We do not want portage's build root ($S) present.
5695	my_little_ninja_foo_2=`echo $deplib \|$EGREP -e "$S"`
5696	# We do not want portage's install root ($D) present.
5697	my_little_ninja_foo_3=`echo $deplib \|$EGREP -e "$D"`
5698	if test -n "$my_little_ninja_foo_2" && test "$S"; then
5699	mynewdependency_lib=""
5700	elif test -n "$my_little_ninja_foo_3" && test "$D"; then
5701	eval mynewdependency_lib=`echo "$deplib" \|sed -e "s:$D:/:g" -e 's:/\+:/:g'`
5702	else
5703	mynewdependency_lib="$deplib"
5704	fi
5705	else
5706	mynewdependency_lib="$deplib"
5707	fi
5708	# Do not add duplicates
5709	if test "$mynewdependency_lib"; then
5710	my_little_ninja_foo_4=`echo $newdependency_libs \|$EGREP -e "$mynewdependency_lib"`
5711	if test -z "$my_little_ninja_foo_4"; then
5712	newdependency_libs="$newdependency_libs $mynewdependency_lib"
5713	fi
5714	fi
5715	;;
5716	esac
5717	done
5718	dependency_libs="$newdependency_libs"
5719	newdlfiles=
5720	for lib in $dlfiles; do
5721	name=`$echo "X$lib" \| $Xsed -e 's%^.*/%%'`
5722	eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib`
5723	if test -z "$libdir"; then
5724	$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5725	exit $EXIT_FAILURE
5726	fi
5727	newdlfiles="$newdlfiles $libdir/$name"
5728	done
5729	dlfiles="$newdlfiles"
5730	newdlprefiles=
5731	for lib in $dlprefiles; do
5732	name=`$echo "X$lib" \| $Xsed -e 's%^.*/%%'`
5733	eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib`
5734	if test -z "$libdir"; then
5735	$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5736	exit $EXIT_FAILURE
5737	fi
5738	newdlprefiles="$newdlprefiles $libdir/$name"
5739	done
5740	dlprefiles="$newdlprefiles"
5741	else
5742	newdlfiles=
5743	for lib in $dlfiles; do
5744	case $lib in
5745	[\\/]* \| [A-Za-z]:[\\/]*) abs="$lib" ;;
5746	*) abs=`pwd`"/$lib" ;;
5747	esac
5748	newdlfiles="$newdlfiles $abs"
5749	done
5750	dlfiles="$newdlfiles"
5751	newdlprefiles=
5752	for lib in $dlprefiles; do
5753	case $lib in
5754	[\\/]* \| [A-Za-z]:[\\/]*) abs="$lib" ;;
5755	*) abs=`pwd`"/$lib" ;;
5756	esac
5757	newdlprefiles="$newdlprefiles $abs"
5758	done
5759	dlprefiles="$newdlprefiles"
5760	fi
5761	$rm $output
5762	# place dlname in correct position for cygwin
5763	tdlname=$dlname
5764	case $host,$output,$installed,$module,$dlname in
5765	cygwin,lai,yes,no,.dll \| mingw,lai,yes,no,.dll) tdlname=../bin/$dlname ;;
5766	esac
5767	# Do not add duplicates
5768	if test "$installed" = yes && test "$D"; then
5769	install_libdir=`echo "$install_libdir" \|sed -e "s:$D:/:g" -e 's:/\+:/:g'`
5770	fi
5771	$echo > $output "\
5772	# $outputname - a libtool library file
5773	# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
5774	#
5775	# Please DO NOT delete this file!
5776	# It is necessary for linking the library.
5777
5778	# The name that we can dlopen(3).
5779	dlname='$tdlname'
5780
5781	# Names of this library.
5782	library_names='$library_names'
5783
5784	# The name of the static archive.
5785	old_library='$old_library'
5786
5787	# Libraries that this one depends upon.
5788	dependency_libs='$dependency_libs'
5789
5790	# Version information for $libname.
5791	current=$current
5792	age=$age
5793	revision=$revision
5794
5795	# Is this an already installed library?
5796	installed=$installed
5797
5798	# Should we warn about portability when linking against -modules?
5799	shouldnotlink=$module
5800
5801	# Files to dlopen/dlpreopen
5802	dlopen='$dlfiles'
5803	dlpreopen='$dlprefiles'
5804
5805	# Directory that this library needs to be installed in:
5806	libdir='$install_libdir'"
5807	if test "$installed" = no && test "$need_relink" = yes; then
5808	$echo >> $output "\
5809	relink_command=\"$relink_command\""
5810	fi
5811	done
5812	fi
5813
5814	# Do a symbolic link so that the libtool archive can be found in
5815	# LD_LIBRARY_PATH before the program is installed.
5816	$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
5817	$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' \|\| exit $?
5818	;;
5819	esac
5820	exit $EXIT_SUCCESS
5821	;;
5822
5823	# libtool install mode
5824	install)
5825	modename="$modename: install"
5826
5827	# There may be an optional sh(1) argument at the beginning of
5828	# install_prog (especially on Windows NT).
5829	if test "$nonopt" = "$SHELL" \|\| test "$nonopt" = /bin/sh \|\|
5830	# Allow the use of GNU shtool's install command.
5831	$echo "X$nonopt" \| grep shtool > /dev/null; then
5832	# Aesthetically quote it.
5833	arg=`$echo "X$nonopt" \| $Xsed -e "$sed_quote_subst"`
5834	case $arg in
5835	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
5836	arg="\"$arg\""
5837	;;
5838	esac
5839	install_prog="$arg "
5840	arg="$1"
5841	shift
5842	else
5843	install_prog=
5844	arg=$nonopt
5845	fi
5846
5847	# The real first argument should be the name of the installation program.
5848	# Aesthetically quote it.
5849	arg=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`
5850	case $arg in
5851	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
5852	arg="\"$arg\""
5853	;;
5854	esac
5855	install_prog="$install_prog$arg"
5856
5857	# We need to accept at least all the BSD install flags.
5858	dest=
5859	files=
5860	opts=
5861	prev=
5862	install_type=
5863	isdir=no
5864	stripme=
5865	for arg
5866	do
5867	if test -n "$dest"; then
5868	files="$files $dest"
5869	dest=$arg
5870	continue
5871	fi
5872
5873	case $arg in
5874	-d) isdir=yes ;;
5875	-f)
5876	case " $install_prog " in
5877	[\\\ /]cp\ ) ;;
5878	*) prev=$arg ;;
5879	esac
5880	;;
5881	-g \| -m \| -o) prev=$arg ;;
5882	-s)
5883	stripme=" -s"
5884	continue
5885	;;
5886	-*)
5887	;;
5888	*)
5889	# If the previous option needed an argument, then skip it.
5890	if test -n "$prev"; then
5891	prev=
5892	else
5893	dest=$arg
5894	continue
5895	fi
5896	;;
5897	esac
5898
5899	# Aesthetically quote the argument.
5900	arg=`$echo "X$arg" \| $Xsed -e "$sed_quote_subst"`
5901	case $arg in
5902	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
5903	arg="\"$arg\""
5904	;;
5905	esac
5906	install_prog="$install_prog $arg"
5907	done
5908
5909	if test -z "$install_prog"; then
5910	$echo "$modename: you must specify an install program" 1>&2
5911	$echo "$help" 1>&2
5912	exit $EXIT_FAILURE
5913	fi
5914
5915	if test -n "$prev"; then
5916	$echo "$modename: the \`$prev' option requires an argument" 1>&2
5917	$echo "$help" 1>&2
5918	exit $EXIT_FAILURE
5919	fi
5920
5921	if test -z "$files"; then
5922	if test -z "$dest"; then
5923	$echo "$modename: no file or destination specified" 1>&2
5924	else
5925	$echo "$modename: you must specify a destination" 1>&2
5926	fi
5927	$echo "$help" 1>&2
5928	exit $EXIT_FAILURE
5929	fi
5930
5931	# Strip any trailing slash from the destination.
5932	dest=`$echo "X$dest" \| $Xsed -e 's%/$%%'`
5933
5934	# Check to see that the destination is a directory.
5935	test -d "$dest" && isdir=yes
5936	if test "$isdir" = yes; then
5937	destdir="$dest"
5938	destname=
5939	else
5940	destdir=`$echo "X$dest" \| $Xsed -e 's%/[^/]*$%%'`
5941	test "X$destdir" = "X$dest" && destdir=.
5942	destname=`$echo "X$dest" \| $Xsed -e 's%^.*/%%'`
5943
5944	# Not a directory, so check to see that there is only one file specified.
5945	set dummy $files
5946	if test "$#" -gt 2; then
5947	$echo "$modename: \`$dest' is not a directory" 1>&2
5948	$echo "$help" 1>&2
5949	exit $EXIT_FAILURE
5950	fi
5951	fi
5952	case $destdir in
5953	[\\/]* \| [A-Za-z]:[\\/]*) ;;
5954	*)
5955	for file in $files; do
5956	case $file in
5957	*.lo) ;;
5958	*)
5959	$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
5960	$echo "$help" 1>&2
5961	exit $EXIT_FAILURE
5962	;;
5963	esac
5964	done
5965	;;
5966	esac
5967
5968	# This variable tells wrapper scripts just to set variables rather
5969	# than running their programs.
5970	libtool_install_magic="$magic"
5971
5972	staticlibs=
5973	future_libdirs=
5974	current_libdirs=
5975	for file in $files; do
5976
5977	# Do each installation.
5978	case $file in
5979	*.$libext)
5980	# Do the static libraries later.
5981	staticlibs="$staticlibs $file"
5982	;;
5983
5984	*.la)
5985	# Check to see that this really is a libtool archive.
5986	if (${SED} -e '2q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
5987	else
5988	$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
5989	$echo "$help" 1>&2
5990	exit $EXIT_FAILURE
5991	fi
5992
5993	library_names=
5994	old_library=
5995	relink_command=
5996	# If there is no directory component, then add one.
5997	case $file in
5998	/ \| \\) . $file ;;
5999	*) . ./$file ;;
6000	esac
6001
6002	# Add the libdir to current_libdirs if it is the destination.
6003	if test "X$destdir" = "X$libdir"; then
6004	case "$current_libdirs " in
6005	" $libdir ") ;;
6006	*) current_libdirs="$current_libdirs $libdir" ;;
6007	esac
6008	else
6009	# Note the libdir as a future libdir.
6010	case "$future_libdirs " in
6011	" $libdir ") ;;
6012	*) future_libdirs="$future_libdirs $libdir" ;;
6013	esac
6014	fi
6015
6016	dir=`$echo "X$file" \| $Xsed -e 's%/[^/]*$%%'`/
6017	test "X$dir" = "X$file/" && dir=
6018	dir="$dir$objdir"
6019
6020	if test -n "$relink_command"; then
6021	# Determine the prefix the user has applied to our future dir.
6022	inst_prefix_dir=`$echo "$destdir" \| $SED "s%$libdir\$%%"`
6023
6024	# Don't allow the user to place us outside of our expected
6025	# location b/c this prevents finding dependent libraries that
6026	# are installed to the same prefix.
6027	# At present, this check doesn't affect windows .dll's that
6028	# are installed into $libdir/../bin (currently, that works fine)
6029	# but it's something to keep an eye on.
6030	if test "$inst_prefix_dir" = "$destdir"; then
6031	$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
6032	exit $EXIT_FAILURE
6033	fi
6034
6035	if test -n "$inst_prefix_dir"; then
6036	# Stick the inst_prefix_dir data into the link command.
6037	relink_command=`$echo "$relink_command" \| $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
6038	else
6039	relink_command=`$echo "$relink_command" \| $SED "s%@inst_prefix_dir@%%"`
6040	fi
6041
6042	$echo "$modename: warning: relinking \`$file'" 1>&2
6043	$show "$relink_command"
6044	if $run eval "$relink_command"; then :
6045	else
6046	$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
6047	exit $EXIT_FAILURE
6048	fi
6049	fi
6050
6051	# See the names of the shared library.
6052	set dummy $library_names
6053	if test -n "$2"; then
6054	realname="$2"
6055	shift
6056	shift
6057
6058	srcname="$realname"
6059	test -n "$relink_command" && srcname="$realname"T
6060
6061	# Install the shared library and build the symlinks.
6062	$show "$install_prog $dir/$srcname $destdir/$realname"
6063	$run eval "$install_prog $dir/$srcname $destdir/$realname" \|\| exit $?
6064	if test -n "$stripme" && test -n "$striplib"; then
6065	$show "$striplib $destdir/$realname"
6066	$run eval "$striplib $destdir/$realname" \|\| exit $?
6067	fi
6068
6069	if test "$#" -gt 0; then
6070	# Delete the old symlinks, and create new ones.
6071	# Try `ln -sf' first, because the `ln' binary might depend on
6072	# the symlink we replace! Solaris /bin/ln does not understand -f,
6073	# so we also need to try rm && ln -s.
6074	for linkname
6075	do
6076	if test "$linkname" != "$realname"; then
6077	$show "(cd $destdir && { $LN_S -f $realname $linkname \|\| { $rm $linkname && $LN_S $realname $linkname; }; })"
6078	$run eval "(cd $destdir && { $LN_S -f $realname $linkname \|\| { $rm $linkname && $LN_S $realname $linkname; }; })"
6079	fi
6080	done
6081	fi
6082
6083	# Do each command in the postinstall commands.
6084	lib="$destdir/$realname"
6085	cmds=$postinstall_cmds
6086	save_ifs="$IFS"; IFS='~'
6087	for cmd in $cmds; do
6088	IFS="$save_ifs"
6089	eval cmd=\"$cmd\"
6090	$show "$cmd"
6091	$run eval "$cmd" \|\| {
6092	lt_exit=$?
6093
6094	# Restore the uninstalled library and exit
6095	if test "$mode" = relink; then
6096	$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
6097	fi
6098
6099	exit $lt_exit
6100	}
6101	done
6102	IFS="$save_ifs"
6103	fi
6104
6105	# Install the pseudo-library for information purposes.
6106	name=`$echo "X$file" \| $Xsed -e 's%^.*/%%'`
6107	instname="$dir/$name"i
6108	$show "$install_prog $instname $destdir/$name"
6109	$run eval "$install_prog $instname $destdir/$name" \|\| exit $?
6110
6111	# Maybe install the static library, too.
6112	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
6113	;;
6114
6115	*.lo)
6116	# Install (i.e. copy) a libtool object.
6117
6118	# Figure out destination file name, if it wasn't already specified.
6119	if test -n "$destname"; then
6120	destfile="$destdir/$destname"
6121	else
6122	destfile=`$echo "X$file" \| $Xsed -e 's%^.*/%%'`
6123	destfile="$destdir/$destfile"
6124	fi
6125
6126	# Deduce the name of the destination old-style object file.
6127	case $destfile in
6128	*.lo)
6129	staticdest=`$echo "X$destfile" \| $Xsed -e "$lo2o"`
6130	;;
6131	*.$objext)
6132	staticdest="$destfile"
6133	destfile=
6134	;;
6135	*)
6136	$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
6137	$echo "$help" 1>&2
6138	exit $EXIT_FAILURE
6139	;;
6140	esac
6141
6142	# Install the libtool object if requested.
6143	if test -n "$destfile"; then
6144	$show "$install_prog $file $destfile"
6145	$run eval "$install_prog $file $destfile" \|\| exit $?
6146	fi
6147
6148	# Install the old object if enabled.
6149	if test "$build_old_libs" = yes; then
6150	# Deduce the name of the old-style object file.
6151	staticobj=`$echo "X$file" \| $Xsed -e "$lo2o"`
6152
6153	$show "$install_prog $staticobj $staticdest"
6154	$run eval "$install_prog \$staticobj \$staticdest" \|\| exit $?
6155	fi
6156	exit $EXIT_SUCCESS
6157	;;
6158
6159	*)
6160	# Figure out destination file name, if it wasn't already specified.
6161	if test -n "$destname"; then
6162	destfile="$destdir/$destname"
6163	else
6164	destfile=`$echo "X$file" \| $Xsed -e 's%^.*/%%'`
6165	destfile="$destdir/$destfile"
6166	fi
6167
6168	# If the file is missing, and there is a .exe on the end, strip it
6169	# because it is most likely a libtool script we actually want to
6170	# install
6171	stripped_ext=""
6172	case $file in
6173	*.exe)
6174	if test ! -f "$file"; then
6175	file=`$echo $file\|${SED} 's,.exe$,,'`
6176	stripped_ext=".exe"
6177	fi
6178	;;
6179	esac
6180
6181	# Do a test to see if this is really a libtool program.
6182	case $host in
6183	cygwin\|mingw)
6184	wrapper=`$echo $file \| ${SED} -e 's,.exe$,,'`
6185	;;
6186	*)
6187	wrapper=$file
6188	;;
6189	esac
6190	if (${SED} -e '4q' $wrapper \| grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
6191	notinst_deplibs=
6192	relink_command=
6193
6194	# Note that it is not necessary on cygwin/mingw to append a dot to
6195	# foo even if both foo and FILE.exe exist: automatic-append-.exe
6196	# behavior happens only for exec(3), not for open(2)! Also, sourcing
6197	# `FILE.' does not work on cygwin managed mounts.
6198	#
6199	# If there is no directory component, then add one.
6200	case $wrapper in
6201	/ \| \\) . ${wrapper} ;;
6202	*) . ./${wrapper} ;;
6203	esac
6204
6205	# Check the variables that should have been set.
6206	if test -z "$notinst_deplibs"; then
6207	$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
6208	exit $EXIT_FAILURE
6209	fi
6210
6211	finalize=yes
6212	for lib in $notinst_deplibs; do
6213	# Check to see that each library is installed.
6214	libdir=
6215	if test -f "$lib"; then
6216	# If there is no directory component, then add one.
6217	case $lib in
6218	/ \| \\) . $lib ;;
6219	*) . ./$lib ;;
6220	esac
6221	fi
6222	libfile="$libdir/"`$echo "X$lib" \| $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
6223	if test -n "$libdir" && test ! -f "$libfile"; then
6224	$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
6225	finalize=no
6226	fi
6227	done
6228
6229	relink_command=
6230	# Note that it is not necessary on cygwin/mingw to append a dot to
6231	# foo even if both foo and FILE.exe exist: automatic-append-.exe
6232	# behavior happens only for exec(3), not for open(2)! Also, sourcing
6233	# `FILE.' does not work on cygwin managed mounts.
6234	#
6235	# If there is no directory component, then add one.
6236	case $wrapper in
6237	/ \| \\) . ${wrapper} ;;
6238	*) . ./${wrapper} ;;
6239	esac
6240
6241	outputname=
6242	if test "$fast_install" = no && test -n "$relink_command"; then
6243	if test "$finalize" = yes && test -z "$run"; then
6244	tmpdir=`func_mktempdir`
6245	file=`$echo "X$file$stripped_ext" \| $Xsed -e 's%^.*/%%'`
6246	outputname="$tmpdir/$file"
6247	# Replace the output file specification.
6248	relink_command=`$echo "X$relink_command" \| $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
6249
6250	$show "$relink_command"
6251	if $run eval "$relink_command"; then :
6252	else
6253	$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
6254	${rm}r "$tmpdir"
6255	continue
6256	fi
6257	file="$outputname"
6258	else
6259	$echo "$modename: warning: cannot relink \`$file'" 1>&2
6260	fi
6261	else
6262	# Install the binary that we compiled earlier.
6263	file=`$echo "X$file$stripped_ext" \| $Xsed -e "s%$[^/]*$$%$objdir/\1%"`
6264	fi
6265	fi
6266
6267	# remove .exe since cygwin /usr/bin/install will append another
6268	# one anyway
6269	case $install_prog,$host in
6270	/usr/bin/install,cygwin)
6271	case $file:$destfile in
6272	.exe:.exe)
6273	# this is ok
6274	;;
6275	.exe:)
6276	destfile=$destfile.exe
6277	;;
6278	:.exe)
6279	destfile=`$echo $destfile \| ${SED} -e 's,.exe$,,'`
6280	;;
6281	esac
6282	;;
6283	esac
6284	$show "$install_prog$stripme $file $destfile"
6285	$run eval "$install_prog\$stripme \$file \$destfile" \|\| exit $?
6286	test -n "$outputname" && ${rm}r "$tmpdir"
6287	;;
6288	esac
6289	done
6290
6291	for file in $staticlibs; do
6292	name=`$echo "X$file" \| $Xsed -e 's%^.*/%%'`
6293
6294	# Set up the ranlib parameters.
6295	oldlib="$destdir/$name"
6296
6297	$show "$install_prog $file $oldlib"
6298	$run eval "$install_prog \$file \$oldlib" \|\| exit $?
6299
6300	if test -n "$stripme" && test -n "$old_striplib"; then
6301	$show "$old_striplib $oldlib"
6302	$run eval "$old_striplib $oldlib" \|\| exit $?
6303	fi
6304
6305	# Do each command in the postinstall commands.
6306	cmds=$old_postinstall_cmds
6307	save_ifs="$IFS"; IFS='~'
6308	for cmd in $cmds; do
6309	IFS="$save_ifs"
6310	eval cmd=\"$cmd\"
6311	$show "$cmd"
6312	$run eval "$cmd" \|\| exit $?
6313	done
6314	IFS="$save_ifs"
6315	done
6316
6317	if test -n "$future_libdirs"; then
6318	$echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
6319	fi
6320
6321	if test -n "$current_libdirs"; then
6322	# Maybe just do a dry run.
6323	test -n "$run" && current_libdirs=" -n$current_libdirs"
6324	exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
6325	else
6326	exit $EXIT_SUCCESS
6327	fi
6328	;;
6329
6330	# libtool finish mode
6331	finish)
6332	modename="$modename: finish"
6333	libdirs="$nonopt"
6334	admincmds=
6335
6336	if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
6337	for dir
6338	do
6339	libdirs="$libdirs $dir"
6340	done
6341
6342	for libdir in $libdirs; do
6343	if test -n "$finish_cmds"; then
6344	# Do each command in the finish commands.
6345	cmds=$finish_cmds
6346	save_ifs="$IFS"; IFS='~'
6347	for cmd in $cmds; do
6348	IFS="$save_ifs"
6349	eval cmd=\"$cmd\"
6350	$show "$cmd"
6351	$run eval "$cmd" \|\| admincmds="$admincmds
6352	$cmd"
6353	done
6354	IFS="$save_ifs"
6355	fi
6356	if test -n "$finish_eval"; then
6357	# Do the single finish_eval.
6358	eval cmds=\"$finish_eval\"
6359	$run eval "$cmds" \|\| admincmds="$admincmds
6360	$cmds"
6361	fi
6362	done
6363	fi
6364
6365	# Exit here if they wanted silent mode.
6366	test "$show" = : && exit $EXIT_SUCCESS
6367
6368	$echo "X----------------------------------------------------------------------" \| $Xsed
6369	$echo "Libraries have been installed in:"
6370	for libdir in $libdirs; do
6371	$echo " $libdir"
6372	done
6373	$echo
6374	$echo "If you ever happen to want to link against installed libraries"
6375	$echo "in a given directory, LIBDIR, you must either use libtool, and"
6376	$echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
6377	$echo "flag during linking and do at least one of the following:"
6378	if test -n "$shlibpath_var"; then
6379	$echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
6380	$echo " during execution"
6381	fi
6382	if test -n "$runpath_var"; then
6383	$echo " - add LIBDIR to the \`$runpath_var' environment variable"
6384	$echo " during linking"
6385	fi
6386	if test -n "$hardcode_libdir_flag_spec"; then
6387	libdir=LIBDIR
6388	eval flag=\"$hardcode_libdir_flag_spec\"
6389
6390	$echo " - use the \`$flag' linker flag"
6391	fi
6392	if test -n "$admincmds"; then
6393	$echo " - have your system administrator run these commands:$admincmds"
6394	fi
6395	if test -f /etc/ld.so.conf; then
6396	$echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
6397	fi
6398	$echo
6399	$echo "See any operating system documentation about shared libraries for"
6400	$echo "more information, such as the ld(1) and ld.so(8) manual pages."
6401	$echo "X----------------------------------------------------------------------" \| $Xsed
6402	exit $EXIT_SUCCESS
6403	;;
6404
6405	# libtool execute mode
6406	execute)
6407	modename="$modename: execute"
6408
6409	# The first argument is the command name.
6410	cmd="$nonopt"
6411	if test -z "$cmd"; then
6412	$echo "$modename: you must specify a COMMAND" 1>&2
6413	$echo "$help"
6414	exit $EXIT_FAILURE
6415	fi
6416
6417	# Handle -dlopen flags immediately.
6418	for file in $execute_dlfiles; do
6419	if test ! -f "$file"; then
6420	$echo "$modename: \`$file' is not a file" 1>&2
6421	$echo "$help" 1>&2
6422	exit $EXIT_FAILURE
6423	fi
6424
6425	dir=
6426	case $file in
6427	*.la)
6428	# Check to see that this really is a libtool archive.
6429	if (${SED} -e '2q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
6430	else
6431	$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
6432	$echo "$help" 1>&2
6433	exit $EXIT_FAILURE
6434	fi
6435
6436	# Read the libtool library.
6437	dlname=
6438	library_names=
6439
6440	# If there is no directory component, then add one.
6441	case $file in
6442	/ \| \\) . $file ;;
6443	*) . ./$file ;;
6444	esac
6445
6446	# Skip this library if it cannot be dlopened.
6447	if test -z "$dlname"; then
6448	# Warn if it was a shared library.
6449	test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
6450	continue
6451	fi
6452
6453	dir=`$echo "X$file" \| $Xsed -e 's%/[^/]*$%%'`
6454	test "X$dir" = "X$file" && dir=.
6455
6456	if test -f "$dir/$objdir/$dlname"; then
6457	dir="$dir/$objdir"
6458	else
6459	$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
6460	exit $EXIT_FAILURE
6461	fi
6462	;;
6463
6464	*.lo)
6465	# Just add the directory containing the .lo file.
6466	dir=`$echo "X$file" \| $Xsed -e 's%/[^/]*$%%'`
6467	test "X$dir" = "X$file" && dir=.
6468	;;
6469
6470	*)
6471	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
6472	continue
6473	;;
6474	esac
6475
6476	# Get the absolute pathname.
6477	absdir=`cd "$dir" && pwd`
6478	test -n "$absdir" && dir="$absdir"
6479
6480	# Now add the directory to shlibpath_var.
6481	if eval "test -z \"\$$shlibpath_var\""; then
6482	eval "$shlibpath_var=\"\$dir\""
6483	else
6484	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
6485	fi
6486	done
6487
6488	# This variable tells wrapper scripts just to set shlibpath_var
6489	# rather than running their programs.
6490	libtool_execute_magic="$magic"
6491
6492	# Check if any of the arguments is a wrapper script.
6493	args=
6494	for file
6495	do
6496	case $file in
6497	-*) ;;
6498	*)
6499	# Do a test to see if this is really a libtool program.
6500	if (${SED} -e '4q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6501	# If there is no directory component, then add one.
6502	case $file in
6503	/ \| \\) . $file ;;
6504	*) . ./$file ;;
6505	esac
6506
6507	# Transform arg to wrapped name.
6508	file="$progdir/$program"
6509	fi
6510	;;
6511	esac
6512	# Quote arguments (to preserve shell metacharacters).
6513	file=`$echo "X$file" \| $Xsed -e "$sed_quote_subst"`
6514	args="$args \"$file\""
6515	done
6516
6517	if test -z "$run"; then
6518	if test -n "$shlibpath_var"; then
6519	# Export the shlibpath_var.
6520	eval "export $shlibpath_var"
6521	fi
6522
6523	# Restore saved environment variables
6524	if test "${save_LC_ALL+set}" = set; then
6525	LC_ALL="$save_LC_ALL"; export LC_ALL
6526	fi
6527	if test "${save_LANG+set}" = set; then
6528	LANG="$save_LANG"; export LANG
6529	fi
6530
6531	# Now prepare to actually exec the command.
6532	exec_cmd="\$cmd$args"
6533	else
6534	# Display what would be done.
6535	if test -n "$shlibpath_var"; then
6536	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
6537	$echo "export $shlibpath_var"
6538	fi
6539	$echo "$cmd$args"
6540	exit $EXIT_SUCCESS
6541	fi
6542	;;
6543
6544	# libtool clean and uninstall mode
6545	clean \| uninstall)
6546	modename="$modename: $mode"
6547	rm="$nonopt"
6548	files=
6549	rmforce=
6550	exit_status=0
6551
6552	# This variable tells wrapper scripts just to set variables rather
6553	# than running their programs.
6554	libtool_install_magic="$magic"
6555
6556	for arg
6557	do
6558	case $arg in
6559	-f) rm="$rm $arg"; rmforce=yes ;;
6560	-*) rm="$rm $arg" ;;
6561	*) files="$files $arg" ;;
6562	esac
6563	done
6564
6565	if test -z "$rm"; then
6566	$echo "$modename: you must specify an RM program" 1>&2
6567	$echo "$help" 1>&2
6568	exit $EXIT_FAILURE
6569	fi
6570
6571	rmdirs=
6572
6573	origobjdir="$objdir"
6574	for file in $files; do
6575	dir=`$echo "X$file" \| $Xsed -e 's%/[^/]*$%%'`
6576	if test "X$dir" = "X$file"; then
6577	dir=.
6578	objdir="$origobjdir"
6579	else
6580	objdir="$dir/$origobjdir"
6581	fi
6582	name=`$echo "X$file" \| $Xsed -e 's%^.*/%%'`
6583	test "$mode" = uninstall && objdir="$dir"
6584
6585	# Remember objdir for removal later, being careful to avoid duplicates
6586	if test "$mode" = clean; then
6587	case " $rmdirs " in
6588	" $objdir ") ;;
6589	*) rmdirs="$rmdirs $objdir" ;;
6590	esac
6591	fi
6592
6593	# Don't error if the file doesn't exist and rm -f was used.
6594	if (test -L "$file") >/dev/null 2>&1 \
6595	\|\| (test -h "$file") >/dev/null 2>&1 \
6596	\|\| test -f "$file"; then
6597	:
6598	elif test -d "$file"; then
6599	exit_status=1
6600	continue
6601	elif test "$rmforce" = yes; then
6602	continue
6603	fi
6604
6605	rmfiles="$file"
6606
6607	case $name in
6608	*.la)
6609	# Possibly a libtool archive, so verify it.
6610	if (${SED} -e '2q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6611	. $dir/$name
6612
6613	# Delete the libtool libraries and symlinks.
6614	for n in $library_names; do
6615	rmfiles="$rmfiles $objdir/$n"
6616	done
6617	test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
6618
6619	case "$mode" in
6620	clean)
6621	case " $library_names " in
6622	# " " in the beginning catches empty $dlname
6623	" $dlname ") ;;
6624	*) rmfiles="$rmfiles $objdir/$dlname" ;;
6625	esac
6626	test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
6627	;;
6628	uninstall)
6629	if test -n "$library_names"; then
6630	# Do each command in the postuninstall commands.
6631	cmds=$postuninstall_cmds
6632	save_ifs="$IFS"; IFS='~'
6633	for cmd in $cmds; do
6634	IFS="$save_ifs"
6635	eval cmd=\"$cmd\"
6636	$show "$cmd"
6637	$run eval "$cmd"
6638	if test "$?" -ne 0 && test "$rmforce" != yes; then
6639	exit_status=1
6640	fi
6641	done
6642	IFS="$save_ifs"
6643	fi
6644
6645	if test -n "$old_library"; then
6646	# Do each command in the old_postuninstall commands.
6647	cmds=$old_postuninstall_cmds
6648	save_ifs="$IFS"; IFS='~'
6649	for cmd in $cmds; do
6650	IFS="$save_ifs"
6651	eval cmd=\"$cmd\"
6652	$show "$cmd"
6653	$run eval "$cmd"
6654	if test "$?" -ne 0 && test "$rmforce" != yes; then
6655	exit_status=1
6656	fi
6657	done
6658	IFS="$save_ifs"
6659	fi
6660	# FIXME: should reinstall the best remaining shared library.
6661	;;
6662	esac
6663	fi
6664	;;
6665
6666	*.lo)
6667	# Possibly a libtool object, so verify it.
6668	if (${SED} -e '2q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6669
6670	# Read the .lo file
6671	. $dir/$name
6672
6673	# Add PIC object to the list of files to remove.
6674	if test -n "$pic_object" \
6675	&& test "$pic_object" != none; then
6676	rmfiles="$rmfiles $dir/$pic_object"
6677	fi
6678
6679	# Add non-PIC object to the list of files to remove.
6680	if test -n "$non_pic_object" \
6681	&& test "$non_pic_object" != none; then
6682	rmfiles="$rmfiles $dir/$non_pic_object"
6683	fi
6684	fi
6685	;;
6686
6687	*)
6688	if test "$mode" = clean ; then
6689	noexename=$name
6690	case $file in
6691	*.exe)
6692	file=`$echo $file\|${SED} 's,.exe$,,'`
6693	noexename=`$echo $name\|${SED} 's,.exe$,,'`
6694	# $file with .exe has already been added to rmfiles,
6695	# add $file without .exe
6696	rmfiles="$rmfiles $file"
6697	;;
6698	esac
6699	# Do a test to see if this is a libtool program.
6700	if (${SED} -e '4q' $file \| grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6701	relink_command=
6702	. $dir/$noexename
6703
6704	# note $name still contains .exe if it was in $file originally
6705	# as does the version of $file that was added into $rmfiles
6706	rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
6707	if test "$fast_install" = yes && test -n "$relink_command"; then
6708	rmfiles="$rmfiles $objdir/lt-$name"
6709	fi
6710	if test "X$noexename" != "X$name" ; then
6711	rmfiles="$rmfiles $objdir/lt-${noexename}.c"
6712	fi
6713	fi
6714	fi
6715	;;
6716	esac
6717	$show "$rm $rmfiles"
6718	$run $rm $rmfiles \|\| exit_status=1
6719	done
6720	objdir="$origobjdir"
6721
6722	# Try to remove the ${objdir}s in the directories where we deleted files
6723	for dir in $rmdirs; do
6724	if test -d "$dir"; then
6725	$show "rmdir $dir"
6726	$run rmdir $dir >/dev/null 2>&1
6727	fi
6728	done
6729
6730	exit $exit_status
6731	;;
6732
6733	"")
6734	$echo "$modename: you must specify a MODE" 1>&2
6735	$echo "$generic_help" 1>&2
6736	exit $EXIT_FAILURE
6737	;;
6738	esac
6739
6740	if test -z "$exec_cmd"; then
6741	$echo "$modename: invalid operation mode \`$mode'" 1>&2
6742	$echo "$generic_help" 1>&2
6743	exit $EXIT_FAILURE
6744	fi
6745	fi # test -z "$show_help"
6746
6747	if test -n "$exec_cmd"; then
6748	eval exec $exec_cmd
6749	exit $EXIT_FAILURE
6750	fi
6751
6752	# We need to display help for each of the modes.
6753	case $mode in
6754	"") $echo \
6755	"Usage: $modename [OPTION]... [MODE-ARG]...
6756
6757	Provide generalized library-building support services.
6758
6759	--config show all configuration variables
6760	--debug enable verbose shell tracing
6761	-n, --dry-run display commands without modifying any files
6762	--features display basic configuration information and exit
6763	--finish same as \`--mode=finish'
6764	--help display this help message and exit
6765	--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
6766	--quiet same as \`--silent'
6767	--silent don't print informational messages
6768	--tag=TAG use configuration variables from tag TAG
6769	--version print version information
6770
6771	MODE must be one of the following:
6772
6773	clean remove files from the build directory
6774	compile compile a source file into a libtool object
6775	execute automatically set library path, then run a program
6776	finish complete the installation of libtool libraries
6777	install install libraries or executables
6778	link create a library or an executable
6779	uninstall remove libraries from an installed directory
6780
6781	MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
6782	a more detailed description of MODE.
6783
6784	Report bugs to <bug-libtool@gnu.org>."
6785	exit $EXIT_SUCCESS
6786	;;
6787
6788	clean)
6789	$echo \
6790	"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
6791
6792	Remove files from the build directory.
6793
6794	RM is the name of the program to use to delete files associated with each FILE
6795	(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6796	to RM.
6797
6798	If FILE is a libtool library, object or program, all the files associated
6799	with it are deleted. Otherwise, only FILE itself is deleted using RM."
6800	;;
6801
6802	compile)
6803	$echo \
6804	"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
6805
6806	Compile a source file into a libtool library object.
6807
6808	This mode accepts the following additional options:
6809
6810	-o OUTPUT-FILE set the output file name to OUTPUT-FILE
6811	-prefer-pic try to building PIC objects only
6812	-prefer-non-pic try to building non-PIC objects only
6813	-static always build a \`.o' file suitable for static linking
6814
6815	COMPILE-COMMAND is a command to be used in creating a \`standard' object file
6816	from the given SOURCEFILE.
6817
6818	The output file name is determined by removing the directory component from
6819	SOURCEFILE, then substituting the C source code suffix \`.c' with the
6820	library object suffix, \`.lo'."
6821	;;
6822
6823	execute)
6824	$echo \
6825	"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
6826
6827	Automatically set library path, then run a program.
6828
6829	This mode accepts the following additional options:
6830
6831	-dlopen FILE add the directory containing FILE to the library path
6832
6833	This mode sets the library path environment variable according to \`-dlopen'
6834	flags.
6835
6836	If any of the ARGS are libtool executable wrappers, then they are translated
6837	into their corresponding uninstalled binary, and any of their required library
6838	directories are added to the library path.
6839
6840	Then, COMMAND is executed, with ARGS as arguments."
6841	;;
6842
6843	finish)
6844	$echo \
6845	"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
6846
6847	Complete the installation of libtool libraries.
6848
6849	Each LIBDIR is a directory that contains libtool libraries.
6850
6851	The commands that this mode executes may require superuser privileges. Use
6852	the \`--dry-run' option if you just want to see what would be executed."
6853	;;
6854
6855	install)
6856	$echo \
6857	"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
6858
6859	Install executables or libraries.
6860
6861	INSTALL-COMMAND is the installation command. The first component should be
6862	either the \`install' or \`cp' program.
6863
6864	The rest of the components are interpreted as arguments to that command (only
6865	BSD-compatible install options are recognized)."
6866	;;
6867
6868	link)
6869	$echo \
6870	"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
6871
6872	Link object files or libraries together to form another library, or to
6873	create an executable program.
6874
6875	LINK-COMMAND is a command using the C compiler that you would use to create
6876	a program from several object files.
6877
6878	The following components of LINK-COMMAND are treated specially:
6879
6880	-all-static do not do any dynamic linking at all
6881	-avoid-version do not add a version suffix if possible
6882	-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
6883	-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
6884	-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
6885	-export-symbols SYMFILE
6886	try to export only the symbols listed in SYMFILE
6887	-export-symbols-regex REGEX
6888	try to export only the symbols matching REGEX
6889	-LLIBDIR search LIBDIR for required installed libraries
6890	-lNAME OUTPUT-FILE requires the installed library libNAME
6891	-module build a library that can dlopened
6892	-no-fast-install disable the fast-install mode
6893	-no-install link a not-installable executable
6894	-no-undefined declare that a library does not refer to external symbols
6895	-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
6896	-objectlist FILE Use a list of object files found in FILE to specify objects
6897	-precious-files-regex REGEX
6898	don't remove output files matching REGEX
6899	-release RELEASE specify package release information
6900	-rpath LIBDIR the created library will eventually be installed in LIBDIR
6901	-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
6902	-static do not do any dynamic linking of libtool libraries
6903	-version-info CURRENT[:REVISION[:AGE]]
6904	specify library version info [each variable defaults to 0]
6905
6906	All other options (arguments beginning with \`-') are ignored.
6907
6908	Every other argument is treated as a filename. Files ending in \`.la' are
6909	treated as uninstalled libtool libraries, other files are standard or library
6910	object files.
6911
6912	If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
6913	only library objects (\`.lo' files) may be specified, and \`-rpath' is
6914	required, except when creating a convenience library.
6915
6916	If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
6917	using \`ar' and \`ranlib', or on Windows using \`lib'.
6918
6919	If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
6920	is created, otherwise an executable program is created."
6921	;;
6922
6923	uninstall)
6924	$echo \
6925	"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
6926
6927	Remove libraries from an installation directory.
6928
6929	RM is the name of the program to use to delete files associated with each FILE
6930	(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6931	to RM.
6932
6933	If FILE is a libtool library, all the files associated with it are deleted.
6934	Otherwise, only FILE itself is deleted using RM."
6935	;;
6936
6937	*)
6938	$echo "$modename: invalid operation mode \`$mode'" 1>&2
6939	$echo "$help" 1>&2
6940	exit $EXIT_FAILURE
6941	;;
6942	esac
6943
6944	$echo
6945	$echo "Try \`$modename --help' for more information about other modes."
6946
6947	exit $?
6948
6949	# The TAGs below are defined such that we never get into a situation
6950	# in which we disable both kinds of libraries. Given conflicting
6951	# choices, we go for a static library, that is the most portable,
6952	# since we can't tell whether shared libraries were disabled because
6953	# the user asked for that or because the platform doesn't support
6954	# them. This is particularly important on AIX, because we don't
6955	# support having both static and shared libraries enabled at the same
6956	# time on that platform, so we default to a shared-only configuration.
6957	# If a disable-shared tag is given, we'll fallback to a static-only
6958	# configuration. But we'll never go from static-only to shared-only.
6959
6960	# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
6961	disable_libs=shared
6962	# ### END LIBTOOL TAG CONFIG: disable-shared
6963
6964	# ### BEGIN LIBTOOL TAG CONFIG: disable-static
6965	disable_libs=static
6966	# ### END LIBTOOL TAG CONFIG: disable-static
6967
6968	# Local Variables:
6969	# mode:shell-script
6970	# sh-indentation:2
6971	# End:

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: FTPfs/curlftpfs-0.9.1/ltmain.sh @ 10

Download in other formats: