source: DRBLTranslatorHelper/en_US @ 23

#!/bin/bash
msg_delimiter_star_line='*****************************************************'.
msg_install_RH='Installing DRBL for RedHat/Fedora Linux...'
msg_install_MDK='Installing DRBL for Mandriva Linux...'
msg_install_DBN='Installing DRBL for Debian Linux...'
msg_install_SUSE='Installing DRBL for SuSE Linux...'
msg_OS_version='The version number for your OS'
msg_is_not_supported='This is not supported version'
msg_press_ctrl_c_stop='Please press Ctrl-C to stop the program!'
msg_set_proxy='Do you want to set the proxy server ?'
msg_http_proxy_server='Proxy server name (FQDN) or IP address for http protocol ?'
msg_http_proxy_port='Proxy server port for http protocol ?'
msg_ftp_proxy_server='Proxy server name (FQDN) or IP address for ftp protocol ?'
msg_ftp_proxy_port='Proxy server port for ftp protocol ?'
msg_http_proxy_you_set='The http proxy server you set'
msg_ftp_proxy_you_set='The ftp proxy server you set'
msg_drbl_test_option='Do you want to use the DRBL "testing" packages which is more powerful, but maybe buggy (If you are brave enough!!!) (If you downloaded the DRBL rpm package from the testing directory, say "yes" here) ?'
msg_drbl_unstable_option='Do you want to use the DRBL "unstable" packages which is much more powerful, but maybe very unstable (If you are super brave!!!) (If you downloaded the DRBL rpm package from the unstable directory, say "yes" here) ?'
msg_drbl_extra_option='Do you want to use some extra packages provided by DRBL project ? (It is not necessary, just an option)'
msg_drbl_netinstall_option='Do you want to install those network installation boot images so that you can let client to install some GNU/Linux distributions (Debian, Ubuntu, RedHat Linux, Fedora Core, Mandriva, CentOS and OpenSuSE...) via network ?  ///NOTE/// This action will download a lot of files (> 100 MB totally) from Internet, so it might take a few minutes. If your client machine has harddisk and it is possible you will install GNU/Linux into that, say Y here. If you say "no" here, feel free to run drbl-netinstall to install them later.'
msg_firefly_option='Do you want to use Asian CJK (Chinese, Japanese, Korean) patched packages (Provided by Firefly) (If you are brave enough) ?'
msg_serial_console_option='Do you want to use the serial console output for clients ?'
msg_know_nothing_serial_console='If you do NOT know anything about this, say "N" here, otherwise clients might show NOTHING on the screen !'
msg_serial_console_only='Use serial console only for clients ? (Suitable for the clients without VGA output).'
msg_redirect_to_which_port='Redirect to which serial port ?'
msg_serial_console_speed='What is the speed for the serial console output ?'
msg_smp_clients='Do you want to use SMP kernel for clients, i.e. your client have two or more CPUs ? Note!!! By choosing SMP kernel, this script will select the optimized kernel automatically!'
msg_smp_clients_MDK='Do you want to use SMP kernel for clients, i.e. your client have two or more CPUs ?'
msg_smp_clients_RH="$msg_smp_clients"
msg_install_apt='Install APT ...'
msg_no_wget_get_it='No wget ? Trying to install wget...'
msg_wget_installed_failure='Failed to install wget!!! We need that to automatically install apt! You have to install it by yourself!'
msg_wget_installed_successful='Package wget installed successfully!'
msg_no_apt_get_it='No apt ? Trying to install apt...'
msg_apt_already_installed='apt is already installed. Amazing!!! You are excellent!'  
msg_backup_apt_sources='Backup apt sources.list ...'
msg_setup_apt_sources_MDK='Setup apt sources.list for Mandrake'
msg_serial_console_parameter='The serial console output parameter: '
msg_enjoy_apt='Now enjoy APT!'
msg_clean_apt_cache='Cleaning the cache of apt to make some settings effect...'
msg_check_apt_integrity='Checking rpm packages for apt integrity...'
msg_upgrade_system_question='Do you want to upgrade operating system ?'
msg_upgrade_whole_system='1st, we upgrade the whole system...'
msg_check_installed_kernel='Checking if the installed kernel is the one we want...'
msg_is_already_installed='is already installed in your system...'
msg_need_to_install_kernel='We need to install the kernel for DRBL environment...Searching...'
msg_create_nbi_files='Creating the image files for PXE and Etherboot client, this will take a few minutes ...'
msg_latest_kernel_for_clients='The latest kernel for DRBL clients is'
msg_no_drbl_script='You did NOT install drbl-script!!! Program terminated!'
msg_create_files_for_PXELINUX='Creating config file for PXE clients...'
msg_prepare_files_for_PXE_client='Preparing config and image files for PXE clients...'
msg_PXE_NOT_work='PXE boot can NOT work!!!'
msg_press_enter_to_continue='Press "Enter" to continue...'
msg_press_enter_to_exit='Press "Enter" to exit...'
msg_FreeDOS_NOT_work='FreeDOS Remote boot can NOT work!!!'
msg_no_apt_already_uninstall='No package apt... Did you already uninstall DRBL packages ?'
msg_program_stop='Program terminated!'
msg_remove_SmallLinuxs_question='Do you want to remove those Small GNU/Linux Distributions (like DSL, PuppyLinux, INSERT or PLD) installed under DRBL environment if they exist ?'
msg_remove_drbl_setup_question='Do you want to remove the "drbl" package ?'
msg_remove_apt_question='Do you want to remove the "apt" package ?'
msg_remove_yum_repo_question='Do you want to remove the yum repository setting ?'
msg_remove_urpmi_media_question='Do you want to remove the urpmi source media setting ?'
msg_cleaning_apt_cache='Cleaning the cache of apt...'
msg_cleaning_tftpboot_and_misc='Cleaning the files in /tftpboot and other files... This might take several minutes...'
msg_uninstalling_DRBL_RH='Uninstalling DRBL for RedHat/Fedora Linux...'
msg_uninstalling_DRBL_MDK='Uninstalling DRBL for Mandriva Linux...'
msg_uninstalling_DRBL_DBN='Uninstalling DRBL for Debian Linux...'
msg_uninstalling_DRBL_SUSE='Uninstalling DRBL for SuSE Linux...'
msg_analyzing_rpm_info='Analyzing the rpm packages info... This might take several minutes...'
msg_failed_to_install_pkgs='Failed to install necessary packages, we can NOT go on!'
msg_check_network_and_url='Please check the network connection between your machine and'
msg_not_determine_OS='Can NOT determine the OS version number you are using!!!'
msg_enter_OS_ver='Please enter the version (RH8.0, RH9, FC1, MDK9.2, MDK10.0...)'
msg_clean_apt_cache_RH='Cleaning the cache of apt to make RPM::Architecture effect...'
msg_install_DRBL_necesary_files='2nd, installing the necessary files for DRBL...'
msg_select_url_path='The url and path you selected'
msg_drbl_driver='Do you want to install the drivers for DRBL client which are not included in the kernel of your distribution, such as bcm4400, bcm5700 ?'
msg_smp_optimization_kernel='You choose SMP kernel, so we must use the same CPU architecture kernel with this DRBL server!'
msg_apt_optimization_question='Which CPU architecture kernel do you want to assign for DRBL clients ?'
msg_optimization_level_0='0 -> i386 level CPU '
msg_optimization_level_1='1 -> i586 level CPU'
msg_optimization_level_2='2 -> Use the same CPU level with that of this DRBL server'
msg_N_note='Note! Note Note!  Note!  Note!  Note!  Note!' 
msg_different_level_machine_prompt='If your client machine(s) is not the same level with server, please answer "0" or "1", otherwise your client machine(s) will NOT be able to boot.'
msg_diff_arch_explain='If you use wrong CPU level kernel, the glibc and openssl package might use i686 or i386, the kernel might use i686, i586 or i386, which might be not suitable to all your machines.' 
msg_not_sure_better_1='If you are not sure, "1" is recommended, this will still have good performance and compatibility.'
msg_same_optimization='The optimization for your system is on, the level is same as server.'
msg_i586_optimization='The optimization for your system is set to "i586".'
msg_no_optimization='No optimization for your system, we will use the "i386" package.'
msg_glibc_openssl_upgrade_question='If there is new glibc and openssl in updates, do you want to upgrade ?'
msg_glibc_openssl_keep='"0" to keep the existing glibc and openssl.'
msg_keep_glibc_upgrade_openssl='"1" to keep the existing glibc, while upgrade openssl,'
msg_upgrade_glibc_keep_openssl='"2" to keep the existing openssl, while upgrade glibc,'
msg_upgrade_glibc_openssl='"3" to upgrade glibc and openssl (default),'
msg_warning_glibc_upgrade='Warning!!!!! glibc is very important, you have to make sure the new glibc will work with this WORKING system (It is seldom that the system hang after upgrading glic, but it did happen in RedHat 9).'
msg_upgrade_glibc_make_you_cry='Sometimes the new glibc will make you cry (Seldom happened)... If you are not sure, you can keep the old but working one, i.e. answer "0".'
msg_install_dhcp_tftp_etc='Install dhcp, tftp, nfs, yp, mkpxeinitrd-net...'
msg_optimization_is_on='The optimization for your system is on, the level is same as server.'
msg_optimization_is_off='No highest optimization for your system, we will use the "i386/i586" kernel, glibc and other packages.'
msg_install_i386_of='Install the i386 version of'
msg_searching_glibc_in_ayo='Searching the glibc in ayo repository'
msg_searching_openssl_in_ayo='Searching the openssl in ayo repository'
msg_searching_openssl_perl_in_ayo='Searching the openssl-perl in ayo repository'
msg_searching_pkg_in_ayo='Searching package in ayo repository'
msg_install_mkinitrd_net_etherboot='Install mkpxeinitrd-net, etherboot, partimage...'
msg_removing_the_old='Removing the old'
msg_creating_dev='Creating device source for clients...'
msg_get_dev='Get the devices file from RPM repository...'
msg_clean_tmp_dev='Cleaning the tmp device directory...'
msg_remove_old_nbi='Remove the old nbi in /tftpboot ...'
msg_install_extra_driver='Installing the driver which is not included in kernel package ...'
msg_no_extra_driver='The driver which is not included in kernel package does not exist in the DRBL apt repository, either...So skip the installation of extra drivers...'
msg_make_client_serial_console='Making the etherboot clients serial console output...'
#
msg_kernel_being_used='Warning! The kernel is being used now: '
msg_warning_not_to_remove='Warning! You had better better not to remove it!!!'
msg_not_remove='Please say "N" to the following remove option!'
#
msg_which_ayo_repository='Which "ayo" repository do you want to use ?'
msg_which_os_ayo_repository='Which "ayo" repository do you want to use for OS packages ?'
msg_which_drbl_ayo_repository='Which "ayo" repository do you want to use for DRBL packages ?'
msg_enter_FQDN_IP_yum_repository='Please enter the hostname (FQDN) or IP address of yum repository with http:// or ftp:// prefix'
msg_enter_the_path_for_dir_ver_updates='In the above yum repository, the path where these directories exist'
# RH/FC os
msg_os_ayo_repository_0='0 -> free.nchc.org.tw. (default)'
msg_os_ayo_repository_1='1 -> ayo.freshrpms.net,'
msg_os_ayo_repository_3='3 -> Enter the directory in local HD ,cdrom or NFS directory. (You have to make sure you already got those files in local directory!)'
msg_os_ayo_repository_5='5 -> Enter ayo repository (with OS packages) by yourself.'
msg_os_ayo_repository_use_existing_yum_config='4 -> Use the existing yum setting in this server (You must make sure it is working!)'
msg_os_ayo_repository_enter_by_yourself='5 -> Enter ayo repository (with OS packages) by yourself.'

# RH/FC drbl
msg_drbl_ayo_repository_0='0 -> free.nchc.org.tw. (default)'
msg_drbl_ayo_repository_1='1 -> ftp.twaren.net,'
msg_drbl_ayo_repository_2='2 -> drbl.sourceforge.net,'
msg_drbl_ayo_repository_3='3 -> Enter the directory in local HD ,cdrom or NFS directory. (You have to make sure you already got those files in local directory!)'
msg_drbl_ayo_repository_5='5 -> To enter repository (with DRBL packages) by yourself.'
msg_drbl_ayo_repository_enter_by_yourself='5 -> To enter repository (with DRBL packages) by yourself.'

# MDK OS
msg_os_ayo_repository_1_mdk='1 -> mdk.linux.org.tw,'
msg_os_ayo_repository_2_mdk='2 -> distro.ibiblio.org,'
msg_ayo_repository_enter_by_yourself='5 -> Enter ayo repository by yourself.'

# MDK drbl
msg_drbl_ayo_repository_1_mdk='1 -> ftp.twaren.net,'
msg_drbl_ayo_repository_2_mdk='2 -> drbl.sourceforge.net,'

msg_apt_not_compatible='Warning! We need to remove apt and libapt-pkg0, then install the apt which is compatible with DRBL.'
msg_do_u_want_to_remove='Do you want to remove ?'
msg_warning_apt_not_compatible_and_fail='You will use the apt which is not compatible with DRBL, something will go wrong!!! The installation will fail!!!'
msg_rm_apt='Removing the package apt and libapt-pkg0...'
msg_search_kernel_in_ayo='In ayo repository, searching the latest'
msg_latest_kernel_in_ayo='The latest kernel in the ayo repository is'
msg_install_kernel_might_take_several_minutes='It might take several minutes to install this kernel, please be patient... '
msg_latest_kernel_is_already_installed='The latest kernel is already installed for DRBL clients, skip the kernel installation.'
msg_error_no_drbl_kernel_in_apt='Can NOT find the DRBL kernel in apt repository!!!'
msg_change_opt_from_i386_to_i586='For the distribution you are using, only i586 and i686 are available, so the optimization level is changed from i386 to i586!!!'
msg_change_opt_from_i586_to_i386='For the distribution you are using, only i386 and i686 are available, so the optimization level is changed from i586 to i386!!!'
msg_are_you_sure_run_impatient='This script is for those impatient, it will setup the DRBL server by the default value which might not fit your environment. Are you impatient ?'
msg_run_step_by_step='Good! You can run the following and answer questions one by one. That should be able to fit your environment better...'
msg_run_drbl4imp='Ok, Laziness is a virtue! Let us setup DRBL server with the default values!!!'
msg_total_avail_space='The total available space for /tftpboot and / is:'
msg_necessary_space_setup_drbl='The estimated necessary space to setup DRBL'
msg_total_client_no='The total client number is'
msg_system_maybe_not_enough_space='The system maybe not have enough space to setup DRBL! Note!!! This maybe will damage your system files!!!'
msg_logout_X_for_thin_client_gdm='If you already logined into X-window, you have to logout X-window to make the modified gdm config work! Note! After that, make sure the gdm is running so that those thin clients can work with this gdm in the DRBL server!'
msg_restart_X_for_thin_client_kdm='You have to restart X-window to make the modified kdm config work! Note! After that, make sure the kdm is running so that those thin clients can work with this kdm in the DRBL server!'
msg_logout_X_for_modified_gdm_config_work='If you already logined into X-window, you have to logout X-window to make the modified gdm config work!'
msg_logout_X_for_modified_kdm_config_work='If you already logined into X-window, you have to logout X-window to make the modified kdm config work!'
msg_restart_graphic_mode_later='You already turn on the thin client option, now you have to start the graphic mode in this server so that those thin clients can connect to this DRBL server.'
msg_turn_on_gdm_remote_access='Turn on the GDM remote access...'
msg_gdm_remote_access_is_already_on='The GDM remote access in the DRBL server is already on!'
msg_set_thin_client_mode_for_clients='Setting the terminal mode for DRBL clients ...'
msg_gdm_remote_access_is_already_off='The GDM remote access in the DRBL server is already off!'
msg_disable_thin_client_mode_for_clients='Disable the terminal mode for DRBL clients ...'
msg_turn_off_gdm_remote_access='Turn off the GDM remote access...'
msg_kdm_remote_access_is_already_on='The KDM remote access in the DRBL server is already on!'
msg_turn_off_kdm_remote_access='Turn off the KDM remote access...'
msg_kdm_remote_access_is_already_off='The KDM remote access in the DRBL server is already off!'
msg_dm_in_DRBL_server='The display manager in this DRBL server is'
msg_hint_for_answer='Hint! When a yes/no option is available, the default value is uppercase, Ex. (y/N), the default is "N", when you press "Enter", it will use "N". If you are not sure which one to choose, you can just press "Enter" key.'
msg_available_kernel='Available kernel'
msg_os_ayo_repository_0='0 -> free.nchc.org.tw,'
msg_os_ayo_repository_1='1 -> ayo.freshrpms.net,'
msg_os_ayo_repository_download_fedora_redhat_com='1 -> download.fedora.redhat.com,'
msg_drbl_ayo_repository_0='0 -> free.nchc.org.tw,'
msg_drbl_ayo_repository_1='1 -> ftp.twaren.net,'
msg_drbl_ayo_repository_2='2 -> drbl.sourceforge.net,'
msg_drbl_server_is_ready='DRBL server is ready!'
msg_all_set_you_can_turn_on_clients='Now set the client machines to boot from PXE or Etherboot (refer to http://drbl.sourceforge.net for more details).'
msg_etherboot_5_4_is_required='If Etherboot is used in client machine, version 5.4.0 or newer is required!'
msg_win_fail_with_Missing_OS='If the cloned OS is MS windows, and it fails to boot with error message like "Missing Operating System" or "Invalid System Disk", then you can try to change the IDE harddrive setting in BIOS to use LBA mode instead of AUTO mode.'

# drbl-script
msg_nchc_title='NCHC - National Center for High-Performance Computing, Taiwan'
msg_drbl_title='DRBL - Diskless Remote Boot in Linux'
msg_switch_client_mode='Switch the mode'
msg_remote_linux='Client remote Linux, default mode, powerful client'
# some prompt we have to use _ instead of " " (space) because we need it to be a word for dialog.
msg_remote_linux_graphic='Client_remote_Linux,_graphic_mode,_powerful_client'
msg_remote_linux_text='Client_remote_Linux,_text_mode,_powerful_client'
msg_thin_client='Client_remote_Display_Linux,_terminal_mode'
msg_remote_memtest='Client remote boot to run Memtest86+'
msg_remote_fdos='Client remote boot to run FreeDOS'
msg_clonezilla_start='Start_clonezilla_mode'
msg_clonezilla_stop='Stop_clonezilla_mode'
msg_netinstall='Client_install_Linux_via_network'
msg_local='Client boots its local OS'
msg_reboot='Reboot client now'
msg_shutdown='Shutdown client now'
msg_Wake_on_LAN='Turn on client by Wake-on-LAN now'
msg_switch_pxe_menu='Switch DRBL client menus'
msg_title_set_all_clients='Set all clients ?'
msg_set_all_clients='Do you want to set all clients mode ?'
msg_select_all_clients_or_select_part_them='Do you want to set the mode for all clients or part of them ?'
msg_set_all_clients_des='If "No", some modes in the following, you can assign the default mode to each DRBL client by IP or MAC addresses (If MAC addresses are shown in dhcpd.conf),'
msg_select_all_clients='Select all clients'
msg_select_clients='Select part of clients by IP or MAC address'
msg_hide_reveal='Hide or reveal clients boot menus ?'
msg_choose_the_action='Choose the action'
msg_hide_pxe_menus='Hide some revealed clients boot menus'
msg_reveal_pxe_menus='Reveal some hidden clients boot menus'
msg_setdefault_pxe_menu='Set default boot menu for clients'
msg_title_hide='Hide which images for DRBL client ?'
msg_hide_list_des='Select the image label to be hidden for DRBL client when it boots (multiple choices available)'
msg_reveal_title='Reveal which images for DRBL client ?'
msg_reveal_list_des='Select the image label to be shown for DRBL client when it boots (multiple choices available)'
msg_setdefault_title='Set which image as default menu for DRBL client ?'
msg_setdefault_list_des='Select the default menu for DRBL client when it boots'
msg_choose_netinstall_imag='Choose the Linux distribution to install via network'
msg_nchc_clonezilla='Clonezilla - Opensource Clone System (OCS)'
msg_nchc_drbl='DRBL, developed by NCHC Free Software Labs'
msg_nchc_free_software_labs='NCHC Free Software Labs, Taiwan'
msg_specify_hosts='Specify the hosts'
msg_choose_the_multicast_method='Choose the method for multicast clone'
msg_by_MAC_address='Set the mode by MAC address of client'
msg_by_IP_address='Set the mode by IP address of client'
msg_set_by_MAC_address_list='Set_mode_by_clients_MAC_address_list'
msg_set_by_MAC_address_grp='Set_mode_by_clients_MAC_address_group'
msg_set_by_IP_address_list='Set_mode_by_clients_IP_address_list'
msg_set_by_IP_address_grp='Set_mode_by_clients_IP_address_group'
msg_multicast_clonezilla_warning='Multicast Clonezilla Warning!'
msg_multicast_clonezilla_warning_des='You are not setting all the clients, so remember the multicast restoring mode ONLY can run 1 (one) type image each time. You will mess them up if different multicast restoring images are assigned. Press the ENTER key to continue...'
msg_choose_param_to_set='Set the advanced parameters (multiple choices available). If you have no idea, keep the default value, i.e. do NOT change anything.'
msg_hint_for_not_fdisk='///NOTE/// By default, Clonezilla WILL CREATE THE PARTITION TABLE IN TARGET DISK (even if you only restore an image to a partition). THIS WILL ERASE ALL THE DATA IN THE TARGET DEVICE!!! If you do NOT want clonezilla to do that for you, check -k'
msg_choose_one_compression_param_to_save='Choose the compression option. If you have no idea, keep the default value, i.e. do NOT change anything. ///NOTE/// -z3 (lzop) is fatest for compressing image and the image size is good enough (slight larger than that of gzip). However, it is not recommended when saving the image in (1) a network-based directory (2) a machine with bad quality of memory (RAM). Its algorithm requires good quality network and RAM. If the network quality or RAM is not good enough, your saved image will be broken!'
msg_ocs_param_n='Server will NOT restart nfs when start/stop clonezilla'
msg_ocs_param_u='Select the image to restore in client (only for unicast restoring)'
msg_ocs_param_c='Client waits for confirmation before cloning'
msg_ocs_param_s='Client skips the hardware detection when booting'
msg_ocs_param_f='Server will restart nfs when start/stop clonezilla'
msg_ocs_param_j='Use sfdisk to create partition in target HD instead of dd'
msg_ocs_param_j0='Use dd to create partition (NOT OK as logical drives exist)'
msg_ocs_param_k='Do NOT create partition table in target harddisk in client'
msg_ocs_param_t='Client does not restore the MBR (Mater Boot Record)'
msg_ocs_param_e='Client uses the HD CHS value (saved in image) for sfdisk'
msg_ocs_param_y='Server always provides clone mode - default local boot'
msg_ocs_param_y0='Server always provides clone mode - default local boot'
msg_ocs_param_y1='Server always provides clone mode - default clone'
msg_ocs_param_y2='Server always provides clone mode - default drbl'
msg_ocs_param_z0='Without compression(fastest but largest image)'
msg_ocs_param_z1='Use gzip compression(fast but smaller image)'
msg_ocs_param_z2='Use bzip2 compression(slowest but smallest image)'
msg_ocs_param_z3='Use lzo compression(faster, image size ~ gzip)'
msg_ocs_param_g_auto='Client will reinstall grub in its HD MBR'
msg_ocs_param_p_true='Do nothing when clone finishes'
msg_ocs_param_p_poweroff='Shutdown client when clone finishes'
msg_ocs_param_p_reboot='Reboot client when clone finishes'
msg_ocs_param_p_choose='Choose in client as clone finishes'
msg_choose_post_mode_after_clone='The action when client finishes cloning'
msg_default_pxemenu_for_clone='The default PXE boot menu when booting is'
# Since drbl.conf is loaded before language file is loaded, we explicitly show it as $OCS_PRERUN_DIR and $OCS_POSTRUN_DIR
msg_ocs_param_o0='Run script in $OCS_PRERUN_DIR before clone starts'
msg_ocs_param_o1='Run script in $OCS_POSTRUN_DIR as clone finishes'
msg_ocs_param_hn0='Change MS Win hostname (based on IP address) after clone'
msg_ocs_param_hn1='Change MS Win hostname (based on MAC address) after clone'
msg_ocs_param_q='Use ntfsclone to save NTFS partition instead of partimage'
msg_ocs_param_a='Do NOT force to turn on HD DMA'
msg_ocs_param_nogui='Do NOT show GUI of partimage, use text only'
msg_ocs_param_v='Prints verbose messages (especially for udpcast)'
msg_ocs_param_r='Resize the filesystem to fit partition size in target machine'
msg_ocs_param_x='Use full-duplex network when multicast clone'
msg_ocs_param_ns='Put ntfsclone temp file in image dir in server'
msg_ocs_param_broadcast='When multicast clone, use broadcast. Use this as switch blocks multicast'
msg_ocs_param_skip='Skip this option'
msg_ocs_param_notfs_ok='Assume NTFS integrity is OK, skip checking (for ntfsclone only)'
msg_clonezilla_advanced_extra_param='Clonezilla advanced extra parameters'
msg_skip_set_advanced_extra_param='Do you want to *SKIP* setting advanced extra parameters for clonezilla ? \n
Available parameters: \n'
msg_skip_set_save_compression_extra_param='Do you want to *SKIP* using other compression method (default is gzip) ?\n
Available param:\n'
msg_no_network_installation_img='No network installation image found!'
msg_no_network_installation_img_des="I can NOT find any network installation image in $PXELINUX_DIR/default! \nMake sure you already install those netinstall RPM packages (like rh-FC3-netinstall) and run $DRBL_SCRIPT_PATH/sbin/generate-pxe-menu to generate the PXE menu file ($PXELINUX_DIR/default)."
msg_start_clonezilla_mode='Start the Clonezilla mode'
msg_choose_mode='Choose the mode'
msg_clonezilla_save_disk='Save_client_entire_disk'
msg_clonezilla_restore_disk='Restore_client_entire_disk'
msg_clonezilla_save_parts='Save_client_partitions'
msg_clonezilla_restore_parts='Restore_client_partitions'
msg_clonezilla_save_hda1='Save client hda1 (Deprecated! Use the above!)'
msg_clonezilla_restore_hda1='Restore client hda1 (Deprecated! Use the above!)'
msg_clonezilla_selec_in_client='Choose save/restore in client (unicast only)'
msg_choose_the_mode_to_restore_disk='Choose the mode to restore client disk'
msg_choose_the_mode_to_restore_parts='Choose the mode to restore client parts'
msg_choose_the_mode_to_restore_hda1='Choose the mode to restore client /dev/hda1'
msg_abandon_hda1='Note! Save and restore client hda1 is no more! Please use save and restore partition instead.'
msg_unicast_restore='unicast restore'
msg_multicast_restore='multicast restore'
msg_choose_the_image_to_restore='Choose the image file to restore'
msg_time_to_wait='Set the time for clients to start cloning'
msg_clients_to_wait='Set the no. of clients to clone'
msg_clients_time_to_wait='Set the no. of clients & maximum time to start cloning'
msg_how_many_clients_to_restore='How many clients to restore'
msg_input_name_to_save_the_img='Input a name to save the image'
msg_time_to_wait_sec='Minimum time to wait (Sec) (The counts start when first client connects)'
msg_max_time_to_wait_sec="Maximum time to wait (Sec) (The counts start when first client connects), i.e. When  not  enough  clients  have  connected (but at least one), start anyways after [this assigned seconds] since first client connection have passed. (Better >= $SLEEP_TIME_AFTER_PART_CLONED)"
msg_you_must_input_filename='You have to input a name'
msg_you_must_input_legal_filename="You have to input a legal image name (containing only alphabet, digit, _, - and .)"
msg_you_must_input_partition='You have to input a partition'
msg_please_do_it_again='Please do it again'
msg_choose_the='Choose the'
msg_to_save='to save (only mounted partition is listed)'
msg_the_image='The image'
msg_was_saved_before='exists! This image name is already used'
msg_do_you_want_to_replace='Do you want to overwrite it'
msg_linux_disk_MS_mapping='The disk name is the device name in GNU/Linux. If the system you want to save is MS windows, normally 1st disk is hda (for PATA) or sda (for SATA or SCSI), and 2nd disk could be hdb or sdb...'
msg_linux_parts_MS_mapping='The partition name is the device name in GNU/Linux. If the system you want to save is MS windows, normally C: is hda1 (for PATA) or sda1 (for SATA or SCSI), and D: could be hda2 (or sda2), hda5 (or sda5)...'
msg_choose_disks_to_save='Choose the source disk(s) to save (only unmounted disk is listed)'
msg_choose_parts_to_save='Choose the source partition(s) to save (only unmounted partition is listed).'
msg_choose_the_disks_to_restore='Choose the target disk(s) to restore (///NOTE/// The existing data in the target disk will be overwritten!)'
msg_choose_the_parts_to_restore='Choose the target partition(s) to restore (///NOTE/// The existing data in the target partition will be overwritten!)'
msg_no_umounted_disks_found='No unmounted disk(s) are found! To use Clonezilla to save or clone a disk, the source disk must be unmounted!'
msg_no_umounted_parts_found='No unmounted partition(s) are found! To use Clonezilla to save or clone a partition, the source partition must be unmounted!'
msg_you_can_not_hide_all_pxe_menus='You can NOT hide all the menus'
msg_no_modification='Omit any modification'
msg_install_via_network='install_via_network'
msg_range_found_in_dhcpd_conf='Warning!!! "range" option is found in dhcpd.conf, this is not a good way in clonezilla... It is better to let your DRBL client acquire same IP address by setting MAC address in dhcpd.conf so that you will NOT overwrite OS of some unknown machines.'
msg_you_are_using_multicast_clonezilla='You are using multicast clonezilla, please make sure:'
msg_ethernet_port_is_up_confirm='1. This ethernet port in server is up and connected'
msg_more_NIC_connect_each_other='2. If you have more than 1 (>=2) network switches for DRBL environment, make sure all switches are connected to each other, otherwise multicast packets will not send to every clients from the ethernet port mentioned above via all the switches, so the multicast clone might NOT start.'
msg_switch_drbl_service='Start/stop/restart/add/del DRBL services (To all clients)'
msg_start_drbl_all_services='Start DRBL-related services in DRBL server'
msg_stop_drbl_all_services='Stop DRBL-related services in DRBL server'
msg_restart_drbl_all_services='Restart DRBL-related services in DRBL server'
msg_add_drbl_all_services='Add all DRBL-related services in DRBL server'
msg_del_drbl_all_services='Del all DRBL-related services in DRBL server'
msg_choose_action='The action is'
msg_login_switch='Switch_client_graphical_(X-window)_login_mode'
msg_normal_login='Normal login (user must enter name and password)'
msg_auto_login='Auto login'
msg_timed_login='Timed login'
msg_turn_on_client_to_make_template='Now set the client machines to boot from PXE or Etherboot (refer to http://drbl.sourceforge.net for more details). Then boot the client to make the template image! Note: If the partition you want to save is NTFS filesystem, it is recommended to defrag that partition first.'
msg_turn_on_client_to_clone='Now set the client machines to boot from PXE or Etherboot (refer to http://drbl.sourceforge.net for more details). Then boot those clients, so that the template image can be cloned to them!'
msg_turn_on_client_to_select_clone_type='Now set the client machines to boot from PXE or Etherboot (refer to http://drbl.sourceforge.net for more details). Then boot those clients and you can choose to save or restore an image!'
msg_client_job_are_logged_in='Client jobs are logged in'
msg_client_sfdisk_log_are_in='The sfdisk log when running clonezilla is in client'
msg_set_the_clients_root_passwd='Set the clients root password.'
msg_new_passwd_prompt='New password: (It will be shown in star wildcard *)'
msg_do_you_want_set_yum_repo='Do you want to select yum repository ?'
msg_set_yum_conf_yes_prompt='If yes, we will list some for you to choose, this maybe good if you know which mirror site is faster in your site.'
msg_set_yum_conf_no_prompt='If not, we will use the existing config files in this machine (so you have to make sure the yum repository setting works in this machine) and generate some config files of DRBL related packages.'
msg_need_lynx_to_parse_config='We need lynx to parse config file to get url, try to install it...'
msg_need_curl_etc_to_parse_config='We need curl, lftp and wget to parse config file to get url, try to install them if not installed...'
msg_try_to_update_some_pkgs='Trying to upgrade some necessary packages if available...'
msg_force_to_upgrade_some_pkgs='Force to upgrade some packages if necessary...'
msg_install_net_install_images='Installing some Linux distribution network installation images...'
msg_clean_dhcpd_lease='Force to reset DHCP IP address leases (For all clients)'
msg_client_reautologin='Force_to_restart_client_autologin'_
msg_clean_autologin_account='Delete_all_autologin_accounts_(For_all_clients)'
msg_reset_autologin_account='Reset_all_autologin_accounts_environment_(For_all_clients)'
msg_re_deploy='Update the files of server to clients (For all clients)'
msg_dcs_others='Other modes or commands'
msg_dcs_more_modes='More modes or commands'
msg_2_kernel_availables='There are 2 kernels available for clients, which one do you prefer ?'
msg_from_this_drbl_server='from this DRBL server'
msg_from_apt_repository='from apt repository'
msg_from_ayo_repository='from apt or yum repository'
msg_install_kernel_for_clients='Install kernel for clients...'
msg_which_kernel_do_you_perfer='Which kernel do you prefer for DRBL clients ? If you already updated your system, it is better to choose the kernel in updates, if not, better to choose that in release.'
msg_you_choose='You choose'
msg_chosen_kernel='Chosen kernel'
msg_not_available_enter_again='Not available, please enter a number again!'
msg_hosts_allow_deny_is_set='Warning! You already set the /etc/hosts.allow or /etc/hosts.deny!'
msg_you_must_make_sure_these_clients='You must MAKE SURE these clients:'
msg_can_access_this_DRBL_server='can access this DRBL server!'
msg_otherwise_client_fail_to_boot='Otherwise, your client will fail to boot, and error messages will like:'
msg_if_you_like_you_can_reboot_to_make_sure_everthing='If you like, you can reboot the DRBL server now to make sure everything is ready...(This is not necessary, just an option.).' 
msg_do_not_create_part='Do NOT create partition table in the client harddisk!'
msg_do_not_restore_mbr='Do NOT restore the MBR in the client!'
msg_you_have_to_input_image_names_in_client='Select the image to restore in the client machine!'
msg_title_input_save_image_name_in_server='Input the image and device name now in this DRBL server or later in template client ?'
msg_ask_if_input_save_image_name_in_server='You can choose to input the image and device name now in the server or later in the template client. (PS. If you are not sure about the device name (Ex. hda or sda), it is recommended to choose "Later_in_client", then you can select them in the template machine later)?'
msg_input_image_name='The image name is:'
msg_input_device_name='The device of the template machine to be saved is:'
msg_ocs_param_exclude_multicast='You assign -u (select image in the client) for clonezilla restoring, so only unicast (no multicast) mode is available!'
msg_run_drbl_ocs_again_cmd='Next time you can run this command directly:'
msg_is_unknown_HD='is unknown HD device! Known and supported HD device is like hda, hdb, hdc, hdd'
msg_creating_partition_in_target='Will create the partition in the target...'
msg_partition_table_for_target_dev='The partition table to write in the target device'
msg_if_go_on_the_data_will_be_erased_then_confirm='If you go on, the original data exist in the target device will be destroyed!!! Be careful!!! Are you sure ?'
msg_should_not_run_ocs_onthefly_in_server='You should not run this program in DRBL server!!! You should run it in DRBL client!!!'
msg_ok_we_will_keep_old_partition_table='OK, we will keep the old partition table.'
msg_fail_to_create_partition_table_in_target_dev='Fail to create the partition table in the target device' 
msg_my_IP_in_drbl_env='My IP address in DRBL env'
msg_are_u_sure_u_want_to_continue='Are you sure you want to continue'
msg_really_dangerous_then_continue='It is really dangerous!!! Anyway, we will continue...'
msg_src_target_r_same_dev='Source and target are same device!!!'
msg_is_not_valid_grub_root='is NOT a valid grub root partition!' 
msg_different_type_of_input_devs='Different type of input devices'
msg_a_partition_table_already_exist='A partition table already exists in the target device'
msg_do_u_want_to_duplicate_the_partition_layout_to='Do you want to duplicate the partition layout to'
msg_do_you_want_to_clone_the_MBR_to='Do you want to clone MBR to'
msg_do_you_want_to_clone_the_boot_loader_to='Do you want to clone the boot loader to'
msg_skip_clone_MBR='Skip cloning MBR'
msg_skip_clone_boot_loader='Skip cloning boot loader'
msg_failed_to_clone_the_MBR='Failed to clone MBR to'
msg_failed_to_clone_the_boot_loader='Failed to clone boot loader to'
msg_now_run_this_cmd_in_target_machine='Now you can boot the TARGET machine via Clonezilla live or DRBL, then run the following command(s) in TARGET machine to start the clone'
msg_if_clone_the_partition_to_hda1_in_target_machine='For example, if you want to clone the partition to hda1 in target machine, you can run it in the target machine like'
msg_if_clone_the_disk_to_hda_in_target_machine='For example, If you want to clone the disk to hda in target machine, you can run it in the target machine like'
msg_this_is_for_source_machine='This is for source machine'
msg_this_is_for_target_machine='This is for target machine'
msg_kernel_2_6_13_15_defaul_is_buggy='The running kernel 2.6.13-15-default in this machine is BUGGY!!! The NFS locking is not working! A lot of programs in DRBL client will NOT work!!!'
msg_u_have_to_upgrade_kernel_in_this_machine='You have to upgrade the kernel in this machine, i.e. do it like:'
msg_then_reboot_this_server='Then reboot this server to use the new kernel.'
msg_make_audio_open='Make the audio devices open to all users in DRBL clients.'
msg_make_audio_close='Do not make the audio devices open to all users in DRBL clients.'
msg_make_plugdev_open='Make the plugdev devices open to all users in DRBL clients.'
msg_make_plugdev_close='Do not make the plugdev devices open to all users in DRBL clients.'
msg_restart_prompt_for_audio='Since you change the audio devices setting of clients, if you already logged in X-window in DRBL clients, then you have to: (1) reboot DRBL client, or (2) restart the service udev and logout and login X-window in DRBL client to make the audio setting take effect.'
msg_restart_prompt_for_plugdev='Since you change the plugdev devices setting of clients, if you already logged in X-window in DRBL clients, then you have to logout and login X-window in DRBL client to make the plugdev setting take effect.'
msg_restart_prompt_for_dev='Since you change the devices setting of clients, if you already logged in X-window in DRBL clients, then you have to logout and login X-window in DRBL client to make the devices settings take effect.'
msg_run_update_plugdev_again='Note! If you add new or remove accounts in the DRBL server in the future, remember to run the following command again, so that the group plugdev will be updated'
msg_run_update_dev_again='Note! If you add new or remove accounts in the DRBL server in the future, remember to run the following command again, so that some group (EX:plugdev) will be updated'
msg_no_autologin_account='No autologin account'
msg_are_you_sure_reset_autologin_home_dir='Are you sure you want to reset home directories of all autologin accounts '
msg_warning_home_dir_will_be_deleted='Warning!!! The data in their home directories will be deleted'
msg_these_accounts_are='These accounts are'
msg_ok_let_do_it="OK, let's do it!"
msg_do_not_reset_autologin_home_dir='Do NOT reset home directories of autologin accounts'
msg_created_autologin_ID_passwd_file="The created ID and password are listed in $AUTO_LOGIN_ID_PASSWD. It would be a good idea to put that file in other safe place, then delete $AUTO_LOGIN_ID_PASSWD."
msg_drbl_clonezilla_switch='Switch DRBL and Clonezilla mechanism'
msg_drbl_mode_switch='Switch DRBL mechanism'
msg_drbl_mode_switch_long="3 modes for diskless linux services:\n[0] Full DRBL mode, every client has its own NFS based /etc and /var.\n[1] DRBL SSI (Single system image) mode, every client uses tmpfs based /etc and /var. In this mode, the loading and necessary disk space of server will be lighter. NOTE! (a) The client machine memory is recommended at least 256 MB. (b) The setting and config files of client will not be saved to the DRBL server! They are just used once and will vanish after the machine shutdowns! Besides, if you modify any file in the template client (located in $drblroot), you have to run $DRBL_SCRIPT_PATH/sbin/gen_ssi_files to create the template tarball in $drbl_common_root/drbl_ssi/.\n[2] I do NOT want to provide diskless Linux service to client.\nWhich mode do you prefer ?"
msg_drbl_mode_0='Use Full DRBL mode'
msg_drbl_mode_1='Use DRBL SSI mode'
msg_drbl_mode_2='Do not provide diskless linux service'
msg_clonezilla_mode_switch='Switch Clonezilla mechanism'
msg_clonezilla_mode_switch_long="3 modes for clonezilla:\n[0] Full clonezilla mode, every client has its own NFS based /etc and /var.\n[1] Clonezilla box mode, every client uses tmpfs based /etc and /var. Note! In Clonezilla box mode, the setting and config files of client will not be saved to the DRBL server! They just use once and will vanish after the machine shutdowns!\n[2] I do NOT want clonezilla.\nWhich mode do you prefer ?"
msg_clonezilla_mode_0='Use Full Clonezilla mode'
msg_clonezilla_mode_1='Use Clonezilla box mode'
msg_clonezilla_mode_2='Do not provide Clonezilla service'
msg_r_u_sure_want_to_del_autologin_accounts='Are you sure you want to delete autologin accounts ?'
msg_also_clean_autologin_accounts='Do you also want to clean the home directories of autologin accounts ?'
msg_do_not_del_accounts='Do NOT delete accounts'
msg_regenerate_nfs_nis_nat_config='Re-generate the config files of NFS, NIS, and NAT based on DHCP service config.'
msg_not_in_SSI_mode="This command only works if DRBL SSI mode is set, since the server is not in DRBL SSI mode, we can not continue. You can use $DRBL_SCRIPT_PATH/sbin/dcs to switch to DRBL SSI mode."
msg_wol_0='Now clients should be able to boot, if not, check:'
msg_wol_1='1. If the BIOS of client is corrected set for Wake on LAN ? Check your BIOS manual for more details.'
msg_wol_2='2. If the client was software shutdowned ? If not, Wake on LAN will not work.'
msg_wol_3='3. If the OS of client can NOT keep network card in standby mode ?'
msg_wol_4="4. If the MAC address of clients are correctly listed in the dhcpd config $DHCPDCONF_DIR/dhcpd.conf ?"
msg_no_kernel_rpm_is_available='A suitable kernel rpm package is NOT found in these URL:'
msg_internet_connection='1. Your Internet connection is operating properly.'
msg_use_baseurl_in_yum_centos='2. Check the OS system files repository settings in /etc/yum.repos.d/ (e.g. /etc/yum.repos.d/CentOS-Base.repo). Try to assign a proper yum repository using baseurl instead of mirrorlist.'
msg_you_must_input_device_name_to_save_image='You must input a device name to save the image'
msg_start_detect_MAC_addresse='Start detecting MAC address....'
msg_enter_1_or_press_enter_to_view='Enter '1' or press 'Enter' to view the collecting status.'
msg_enter_2_or_press_q_to_quit='Enter '2' or 'q' to finish collecting and quit.'
msg_dhcpd_tftpd_stopped_need_restart_if_you_need_them='The services dhcpd and tftpd-hpa/xinetd are stopped, remember to restart them when you need them!'
msg_the_collected_MAC_addr_from='The collected MAC addresses from'
msg_are_saved_in_files_separately='are saved in file(s) separately'
msg_http_isu_edu_tw_not_compatible='Since http://ftp.isu.edu.tw uses page by page output, it is NOT compatible with DRBL scripts.'
msg_prompt_chang_yum_config='This yum repository does NOT work with DRBL setup, you have to modify the yum config file in /etc/yum.repos.d/ to avoid using this repository. If you use mirrorlist, change to baseurl and assign other repository instead of this!'
msg_What_the_win_hostname_prefix='What is the hostname prefix for the clone MS windows'
msg_change_hostname_of_MS_WIN_on_the_fly='You use using -hn0 or -hn1'
msg_write_MS_WIN_is_necessary='You use using -hn0 or -hn1 to change the hostname of MS Win image directly under GNU/Linux. You have to make sure your GNU/Linux can write or modify files in the image MS Win. For FAT filesystem, it will be fine. If it is NTFS, you have to install some packages (such as ntfs-3g or ntfsmount from http://www.linux-ntfs.org) in this server and run drblpush again so that in client environment, Clonezilla can modify files in NTFS filesystem.\nWARNING! ***DO NOT USE THIS OPTION WITH ENCRYPTED FILE SYSTEM IN MS WIN!!!***'
msg_necessary_pkgs_from_dists='These packages from your GNU/Linux distribution are necessary (Check your distribution package repository for more details):'
msg_necessary_pkgs_from_drbl='These packages from DRBL project are necessary [Check http://drbl.sf.net (English) or http://drbl.nchc.org.tw (Chinese) for more details]. rpm or deb packages can be found in http://free.nchc.org.tw/drbl-core or http://drbl.sf.net/drbl-core:'
msg_recommended_pkgs_from_dists='These packages are recommended to install if they exist in the distribution repository:'
msg_install_glibc_etc_arch_by_yourself='If your client CPU arch (say AMD K7) is different from that in the server (say Intel P4), you have to download them and install the packages in this server by the following command, otherwise the client machine will fail to boot:'
msg_prepare_kernel_for_clients='Prepare the kernel for client, searching available kernel in the repository...'
msg_some_necessary_pkgs_not_installed='Warning! Some necessary packages are not installed! If you continue, maybe something will go wrong! You had better to exit now and check you /etc/apt/sources.list and internet link!'
msg_reset_all_existing_urpmi_setting='Warning! We have to reset all the existing urpmi setting!'
msg_some_required_pkgs_not_installed='These required packages are not installed'
msg_use_drblsrv_instead="If your Internet access is ok, use $DRBL_SCRIPT_PATH/sbin/drblsrv instead of this script. It will automatically download and install required packages for you, or you can use the installing tools (like apt/yum/urpmi/YaST) to install these required programs."
msg_continue_may_not_work='If you continue, the DRBL environment may not work!'
msg_switch_pxe_bg_mode='Switch the mode of PXE boot menu'
msg_pxemenu_text='Client uses text PXE boot menu'
msg_pxemenu_graphic='Client uses graphical PXE boot menu'
msg_only_one_kernel_meets_requirement='Only one kernel meets your requirement'
msg_drbl_server_is_NOT_NAT_server='This DRBL server does NOT provide NAT service, so your DRBL client will NOT be able to access Internat.'
msg_ask_user_is_reserved_for_save_mode='"ask_user" is a reserved image name, please use another name!'
msg_all_data_in_dev_will_be_overwritten='THE EXISTING DATA IN THIS HARDDISK/PARTITION(S) WILL BE OVERWRITTEN! ALL EXISTING DATA WILL BE LOST'
msg_authentication_pxe_linux_info="If you want to use authentication mechanism for PXE Linux boot in client, use $DRBL_SCRIPT_PATH/sbin/drbl-pxelinux-passwd in the server. For more info, run \"$DRBL_SCRIPT_PATH/sbin/drbl-pxelinux-passwd -h\"."
msg_this_might_take_several_minutes='This might take several minutes...'
msg_run_dcs_clonezilla_start_to_show_pxemenu="You have to use \"$DRBL_SCRIPT_PATH/sbin/dcs\" -> clonezilla-start to start clonezilla serivce, so that there will be a clonezilla menu when client boots"
msg_if_always_provide_clonezilla_srv="Do you want to ALWAYS provide clonezilla service for client ?\nNOTE! If you choose anyone -y option, the client won't boot local OS after it finishes clone OS into local harddrive! If you are not sure, do NOT choose anyone -y option!"
msg_gen_template_files="Regenerate SSI/Clonezilla box template file"
msg_ocs_iso_too_big_for_CD="The target ISO file is too large to fit in a CD disk."
msg_ocs_iso_too_big_for_DVD="The target ISO file is too large to fit in a DVD disk."
msg_unable_to_create_clonezilla_img_iso="Unable to create this clonezilla image live CD"
msg_mkisofs_unable_process_that="mkisofs is not able to process that!"
msg_burn_clonezilla_img_iso="You can burn this iso file into CD/DVD, then use it to boot other machine to use clonezilla"
msg_burn_drbl_live_img_iso="You can burn this iso file into CD/DVD, then use it to boot other machine to use DRBL"
msg_burn_drbl_live_img_zip="You can unzip this zip file into USB flash drive, then make it bootable by the program 'makeboot.exe' inside it (under MS windows) or 'syslinux -s DEVNAME' (under GNU/Linux, DEVNAME is like /dev/sdb1), then use it to boot other machine to use DRBL"
msg_is_mounted_u_must_unmount_it="This device is mounted! You have to unmount it first"
msg_create_live_device_warning='This program will write Debian Live and DRBL/Clonezilla programs into this device. The MBR of this device will be overwritten (partition table will be kept)! Be careful when you use it! The device is:'
msg_unable_to_mount_this_dev='Unable to mount this device! Did you format that partition already ? This device is'
msg_format_as_FAT_16_32='If you need to format, remember to make it as FAT16 or FAT32, and the partition ID is, for example, "W95 FAT16 (LBA)" (it is "e" shown in fdisk) or "W95 FAT32 (LBA)" (it is "c" shown in fdisk). You can do it in GNU/Linux by'
msg_this_is_disk_usage_status='This is the disk usage status'
msg_boot_clonezilla_live_dev='Now you can use this live device to boot other machine, and use clonezilla'
msg_clone_finished_choose_to='Now you can choose to'
msg_enter_cml='Enter command line prompt'
msg_clonezilla_is_free_and_no_warranty='**Clonezilla is free (GPL) software, and comes with ABSOLUTE NO WARRANTY**'
msg_1_6_a_b_is_reserved='1, 2 ,3, 4, 5, 6, a, b, or -b are reserved name, you can not use it as a clonezilla image name.'
msg_name_ntfs_dd_img_is_reserved='.ntfs-img or .dd-img are reserved name, you can not use it as a clonezilla image name'
msg_to_use_clonezilla_to_save_image='To use clonezilla to save an image'
msg_to_use_clonezilla_to_save_image_again='To use clonezilla to save an image again'
msg_run_sudo_su_to_become_root='Run "sudo su -" to become root'
msg_prepare_writable_dev_and_mount_it_as='You have to prepare another writable device or space, and mount it as'
msg_ex_mount_ocsroot_in_ocs_live="Ex. If you want to use clonezilla to save /dev/hda, and put the image in /dev/hdb1. Then you have to mount /dev/hdb1 as $ocsroot by:"
msg_if_src_part_is_ntfs='If that partition is NTFS, to let it be writable, you have to mount it like:'
msg_sshfs_smbfs_are_supported='Sshfs and smbfs are supported, too. For example, use sshfs, you can mount your remote ssh server or samba server'
msg_use_zh_TW_bterm='If you want to use a terminal with Traditional Chinese support, run'
msg_start_ocs_sr_interactive='Then run this to use clonezilla'
msg_remember_poweroff_reboot_when_ocs_sr_is_done="When everyting is done, remember to use 'poweroff', 'reboot' or follow the menu to do a normal poweroff/reboot procedure. Otherwise if the boot media you are using is a writable device (such as USB flash drive), and it's mounted, poweroff/reboot in abnormal procedure might make it FAIL to boot next time!"
msg_if_you_want_to_use_ocs_again='If you want to use clonezilla again'
msg_extra_storage_space_via_sshfs_smbfs_for_ocs_live='If you need storage space instead of that in this writable device, sshfs and smbfs are supported in clonezilla live. For example, use sshfs, you can mount your remote ssh server'
msg_remove_existing_link_for_ocsroot="Remove the existing link file $ocsroot, then make a dir $ocsroot for mount point"
msg_to_see_this_ocs_live_help_msg='NOTE! The above hints might disappear after you press Enter key and terminal ends. To see this message again, run'
msg_image_source_for_ocs_live="If your clonezilla image is not in this boot media, or you need storage space instead of that in this writable device, you can mount the writable partition as $ocsroot. Remember, sshfs and smbfs are supported in clonezilla live. Here is how to do that"
msg_modify_grub_config_if_necessary="You might need to modify these two files: /boot/grub/menu.lst and /boot/grub/grub.conf which exist in the device $output_dev. For example, the device name in the following 2 lines to fit your environment when using it to boot clonezilla live"
msg_this_script_will_create_SL_diskless='This script will create the diskless server in DRBL environment for this small live GNU/Linux'
msg_RAM_size_for_SL_drbl_client='It is recommended that your client need at least the size of RAM to run it'
msg_image_saved_from_dd='The image is saved from dd. Use dd to restore the image instead of partimage or ntfsclone'
msg_cons_for_dd_clone='dd will save and restore all the blocks in the harddrive, no matter the block is used or not.'
msg_will_be_inefficent_and_slow='THIS WILL BE VERY INEFFICIENT AND MIGHT TAKE VERY LONG TIME'
msg_fs_not_supported_by_partimage_ntfsclone='This file system is not supported by partimage or ntfsclone'
msg_use_this_method_to_save_img='Use this method to save the image instead of partimage or ntfsclone'
msg_status_report_is_very_primitive='The status report in this mode is very primitive'
msg_home_partimag_not_home_partimage='/home/partimage is found! However, the clonezilla image directory is /home/partimag (without last letter "e"). You have to rename /home/partimage as /home/partimag'
msg_target_dev_has_this_partition_table='The target device you want to overwrite has this harddisk info'
msg_let_me_ask_you_again='Let me ask you again'
msg_unable_to_mnt_ocsroot="Unable to mount resource as $ocsroot"
msg_mount_ocsroot_img_hint_short_des='Mount clonezilla image directory'
msg_mount_ocsroo_img_hint_long_des="Where is Clonezilla image is saved to or read from ? Now we need to mount that device or remote resources as $ocsroot."
msg_mount_local_dev='Mount local device'
msg_mount_sshfs='Mount SSH server'
msg_mount_smbfs='Mount SAMBA server'
msg_mount_nfs='Mount NFS server'
msg_mount_ftpfs='Mount FTP server'
msg_do_it_manually='Do it manually'
msg_skip_this_use_existing_ocsroot="Use existing $ocsroot"
msg_device_to_mount_as_ocsroot_do_not_mount_target_dev="Now we need to mount a device as $ocsroot (clonezilla image(s) repository) so that we can read or save image in $ocsroot. ///NOTE/// You should NOT mount the partition you want to backup as $ocsroot"
msg_ip_address_or_FQDN_of_server='IP address or FQDN of the server, Ex. 192.168.120.254 or hostname.domainname.org'
msg_smb_domain_in_server='Domain in the samba server'
msg_if_no_smb_domain_skip_this='You can cancel this if no domain set in the Samba server'
msg_account_in_server='Account in server, the account you have the permission to write (for saving image) or read'
msg_sshfs_dir_path='The directory where clonezilla image will be saved to or read from. ///NOTE/// use absolute path in ssh server'
msg_ftpfs_dir_path='The directory where clonezilla image will be saved to or read from'
msg_now_you_have_to_enter_passwd='Now you have to enter the password for'
msg_confirm_ssh_server_might_be_necessary='If it is the first time you access that ssh server after Clonezilla live boots, for better security, a comfirmation will be asked'
msg_ocs_img_dir_path='The directory where clonezilla image will be saved to or read from'
msg_enter_another_shell_hint='Enter another shell. If you need to configure network, you can use comamnd "ocs-live-netcfg". When everything is done, run "exit" to back to original program.'
msg_existing_setting_is='Existing setting is'
msg_start_clonezilla='Start Clonezilla'
msg_start_clonezilla_or_enter_shell='Start Clonezilla or enter login shell (command line) ?'
msg_writable_dev_ex_usb_stick='writable device Ex disk/USB stick'
msg_writable_fs_ex_nfs_smbfs='writable network disk Ex NFS/SMBFS'
msg_readonly_dev_ex_CD='readonly device Ex CD'
msg_writable_dev_ramdisk='memory disk, the data will vanish after shutdown. *NOT RECOMMENDED*'
msg_warning_mount_ntfs_writable='Warning! Mounting NTFS partition by ntfs-3g is experimental! It might cause file system crash in that NTFS partition (Although the possibility is very low)!'
msg_df_report='The file system disk space usage'
msg_hint_assign_IP_group="Hint 1: You can create IP address group by adding files $drbl_syscfg/IP-grp-*, list IP address in the file line by line. Replace the file name * with any printable character or word, such as 1, DX."
msg_hint_assign_MAC_group="Hint 2: You can create MAC addresses group by adding files $drbl_syscfg/MAC-grp-*, list MAC address in the file line by line. Replace the file name * with any printable character or word, such as 1, DX."
msg_device_image_device_clone='Two modes are available, you can do \n(1) disk/partition to image or image to disk/partition clone or \n(2) disk to disk or partition to partition clone'
msg_device_image_clone='disk/partition to/from image'
msg_device_device_clone='disk/parttion to disk/partition'
msg_disk_to_local_disk='local_disk_to_local_disk_clone'
msg_disk_to_remote_disk='local_disk_to_remote_disk_clone'
msg_part_to_local_part='local_partition_to_local_partition_clone'
msg_part_to_remote_part='local_partition_to_remote_partition_clone'
msg_local_source_disk='Choose local disk as source'
msg_local_target_disk='Choose local disk as target'
msg_local_source_part='Choose local partition as source'
msg_local_target_part='Choose local partition as target'
msg_ocs_onthefly_advanced_extra_param='Clonezilla on-the-fly advanced extra parameters'
msg_ocs_onthefly_param_g='Reinstall grub in target harddisk boot sector'
msg_ocs_onthefly_param_e='Resize the filesystem to fit partition size in target partition'
msg_ocs_onthefly_param_nogui='Do NOT show GUI of partimage, use text only'
msg_ocs_onthefly_param_n='Do NOT create partition table in boot sector in target machine'
msg_ocs_onthefly_param_m='Do NOT clone boot loader'
msg_ocs_onthefly_param_o='Force to load the saved HD CHS value'
msg_ocs_onthefly_param_b='Run clone in batch mode (DANGEROUS!)'
msg_ocs_onthefly_param_v='Prints verbose information'
msg_only_i686_kernel_available_in_centos_5='For the time being, only i686 kernel is officially supported in CentOS 5, no i386 or i586 kernel is available. For more info, check here: http://wiki.centos.org/QaWiki/CentOS5PentiumSupport'
msg_do_you_want_to_clean_all_stale_mac_cfg="Some stale MAC style pxelinux config files are found in $PXELINUX_DIR, and since no MAC address record in dhcpd.conf, we can not clean the specific stale files based on IP adddress for you. Do you want to clean all of them to avoid problem ? \nNote! If yes, you might affect some other clients. If you do not care about other clients, it is OK to say yes since you can always use dcs to change the mode for clients. It is recommended (1) You stop clonezilla by dcs before you use this mode to choose specific clients. (2) Use MAC address in your dhcpd.conf. "
msg_something_went_wrong_when_start_drbl_related_srv='Something went wrong when starting DRBL related services!'
msg_you_can_try_to_run_the_following_again='You can try to run the following again:'
msg_try_drblsrv_offline="If you are sure this GNU/Linux distribution is compatible with those distributions which DRBL supports, you can try to use $DRBL_SCRIPT_PATH/sbin/drblsrv-offline. For more details, check DRBL website or run \"$DRBL_SCRIPT_PATH/sbin/drblsrv-offline -h\""
msg_very_unstable='VERY UNSTABLE'
msg_not_stable='NOT STABLE'
msg_not_secure='Not secure'
msg_no_nic_is_found="No supported network cards found."
msg_choose_nic="Which network device you want to configure"
msg_send_dhcp_request_from="Sending DHCP broadcast from device"
msg_enter_IP_add_for_this_nic="Please enter IP Address for "
msg_enter_netmask_for_this_nic="Please enter Network Mask for "
msg_enter_default_gateway="Please enter Default Gateway"
msg_enter_dns_server="Please enter Nameserver(s)"
msg_put_dnsserver_to_resolv_conf="Setting Nameserver in /etc/resolv.conf to"
msg_append_dnsserver_to_resolv_conf="Adding Nameserver to /etc/resolv.conf:"
msg_Network_config="Network Config"
msg_choose_mode_to_setup_net="Choose the mode to setup the network"
msg_use_dhcp_broadcast="Use DHCP broadcast"
msg_use_static_ip="Use static IP address"
msg_use_pppoe_conf="Use PPPoE"
msg_setup_network_first='Configure network first'
msg_hint_multiple_choice_select_by_space='///Hint! From now on, if multiple choices are available, you have to press space key to mark your selection. A star sign (*) will be shown when the selection is done///'
msg_network_is_not_configured='Network is not configured! Now we will run this program to configure your network'
msg_network_is_already_configured='Network is already configured! Available IP address in this machine'
msg_run_drblpush_with_config_again="PS. The config file is saved as /etc/drbl/drblpush.conf. Therefore if you want to run drblpush with the same config again, you may run it as: $DRBL_SCRIPT_PATH/sbin/drblpush -c /etc/drbl/drblpush.conf"
msg_do_not_assign_default_gw_for_DRBL_NIC='///Note/// You have more than one network cards. Now you can continue to configure them if you want. However, remember (0) Use private IP address. Class C (192.168.x.y) is recommended. (1) Set the IP address in different subnet, i.e. All the network cards have different IP address in different subnet (Ex. 192.168.100.254 for eth1, 192.168.101.254 for eth2...). Do NOT set it in the same subnet with existing one. (2) You should **NOT** assign any "default gateway" to those network cards for clients to connect!'
msg_continue_to_conf_another_NIC='Some network card(s) not configured, continue to configure another network card ?'
msg_no_ip_address_is_configured='No IP address is configured!'
msg_only_one_IP_so_create_alias_IP='Only one network card with one IP address, so now creating an alias IP address to be used for DRBL clients...'
msg_more_than_1_IP_some_for_DRBL_clients='There is more than one IP address. Those not connected to WAN will be used for DRBL clients.'
msg_now_continue_to_run_drblpush='Now we will continue to run drblpush to make the changes work for DRBL environment.'
msg_partimage_not_support_block_per_group_non_32768='Sorry, Partimage, which is used in Clonezilla to save ext2/ext3 partition, does NOT support non-32768 ext2/ext3 partition.'
msg_for_more_info_check='For more info, check'
msg_the_partition_table_in_disk_is_illegal='The partition table in this disk is illegal'
msg_parted_detect_as_wrong="It's not supported by parted. Parted is used in Clonezilla to parse the filesystem in partition table. This partition table is detected as WRONG by parted!" 
msg_error_messages_from_parted_are='The error messages from parted are'
msg_continue_with_weried_partition_table='If you continue, something strange might happen (Ex. dd is used, not partimage or ntfsclone, to save the supported file system), and the image you saved maybe is not complete!'
msg_does_this_part_table_file_fit_disk='Does this partition table file fit this disk'
msg_is_this_disk_too_small='Is this disk too small'
msg_the_following_step_is_to_save_the_disk_part_as_img='The following step is to save the harddisk/partition(s) in this machine as image'
msg_the_following_step_is_to_restore_img_to_disk_part='The following step is to restore image to the harddisk/partition(s) in this machine'
msg_this_image_dir_is_not_complete='This clonezilla image dir is not complete'
msg_now_input_in_server='Now input image and device name'
msg_later_input_in_client='Later input image and device name in client'
msg_drbl_related_services_not_added_started="///NOTE/// You choose not to add and start DRBL-related services in the DRBL server. Remember to run 'drbl-all-service start' if you want to start DRBL-related services."
msg_one_NIC_one_IP_limitation_prompt="///NOTE/// There is only one network card and one IP address in this server. By using alias IP address, we can provide DRBL service with only one network card. However, there is a situation you have to pay attention to those clients connected with eth0 (The first network card in this machine). Since DHCP service will be run in this server, it's better not to lease IP address to ANY client. You'd better to lease IP address to only PXE/Etherboot client connected to eth0, not ANY client (they can be any other M$ Windows or any GNU/Linux client). However, if this limitation is set, and you are using DRBL a Clonezilla server, the restored OS by Clonezilla won't be able to lease IP address from this DRBL server."
msg_if_lease_IP_add_to_pxe_etherboot_only="Do you want to lease IP address to PXE/Etherboot client only ? ///NOTE/// If you say no, any machine connected with eth0 might lease IP address from this DRBL server. THIS IS VERY ANNOYING if you have other machines you do not want them to join DRBL environment! They might lease IP address from this DRBL server! Therefore, it's ONLY when you are SURE all the machines connected with eth0 are used as DRBL/Clonezilla clients, you can say 'no' here."
msg_drbl_env_is_not_ready_now_config='The DRBL environment is not ready. Now you have to input some information, including (1) network configuration and (2) clonezilla image home dir, to setup such an environment.'
msg_drbl_env_is_ready='The DRBL environment is ready, so we can start Clonezilla server now.'
msg_do_not_close_window_until_clone_finish='///NOTE/// DO NOT CLOSE THIS WINDOW UNTIL CLIENTS FINISH CLONE! This window must remain so that the clone services spawned by Clonezilla can work and show results.'
msg_ntfs_in_this_part_is_corrupt='The NTFS in this partition is corrupted'
msg_two_options_for_you_now='Two options for you now'
msg_boot_win_run_chkdsk="Try to boot the template machine into M$ Windows, and run 'chkdsk /f', or 'chkdsk /p /r' (for M$ XP Recovery Console and others), then reboot it TWICE! Important, don't forget the /f or /p /r parameter(s)! This option is recommended!"
msg_run_ntfsfix_then_force_save='Try to let Clonezilla to use ntfsfix to fix it then force to save it. ///Note/// ntfsfix only repairs some fundamental NTFS inconsistencies, resets the NTFS journal file and schedules an NTFS consistency check for the first boot into Windows. In short, ntfsfix is NOT a Linux version of chkdsk. This option is NOT recommended!'
msg_stay_in_this_console_1='Stay in this console (console 1), enter command line prompt'
msg_run_cmd_exit='Run command "exit" or "logout"'
msg_run_clonezilla_live_again='Start over'
msg_this_is_for_drbl_server_not_for_clonezilla_server_edition='This is for DRBL server, if you want to use Clonezilla server edition, it is better to click the icon of "Clonezilla Server Edition" on the desktop, otherwise you have to mount Clonezilla image repository (/home/partimag) by yourself. Now the image repository is using the memory of this machine.'
msg_no_network_card_is_configured_do_it_again='No network card is configured! Do you want to configure again'
msg_link_detected='Link_detected'
msg_option_k_is_not_chosen_part_table_will_be_recreated='Option "-k" in advanced extra parameters is not chosen, the partition table in the target disk will be recreated!!! ///NOTE/// ALL the data in this disk will be erased!!! Please note! Although you are restoring partition(s), however, since "-k" is not chosen, the partition table in the target disk will be recreated!!! ALL the data in this disk will be erased!!!'

#-----------------------------------------
# some words
msg_text_Enter='Enter'
msg_text_for='for'
msg_Got_it='Got it'
msg_Warning='Warning'
msg_uppercase_Warning='WARNING'
msg_NOT_found='NOT found'
msg_Done='Done'
msg_please='please'
msg_browse='browse'
msg_or='or'
msg_for_more_details='for more details'
msg_Failed_to_get='Failed to get'
msg_Failed_to_install='Failed to install'
msg_done='done'
msg_note='NOTE'
msg_and='and'
msg_clonezilla='Clonezilla'
msg_error='Error'
msg_restore='restore'
msg_txt_check='Check'
msg_ex='Ex'
msg_exit='Exit'
msg_poweroff="Poweroff"
msg_reboot="Reboot"
msg_then='then'
msg_unknown='Unknown'
msg_experimental='Experimental'
msg_failed="Failed"